* A little bit fixing and extending the existing documentation
@ 2015-02-27 14:07 Juergen Borleis
2015-02-27 14:07 ` [PATCH 1/5] Docs: add some info about the Phytec's phyCORE-i.MX35 Juergen Borleis
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Juergen Borleis @ 2015-02-27 14:07 UTC (permalink / raw)
To: barebox
This time I changed two older platforms to the new default environment and
added some more documentation snippets.
The result of the change to the new default environment was tested on real
targets.
Regards,
Juergen
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/5] Docs: add some info about the Phytec's phyCORE-i.MX35
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
@ 2015-02-27 14:07 ` Juergen Borleis
2015-02-27 14:07 ` [PATCH 2/5] phyCORE-PXA270: switch to the new environment template Juergen Borleis
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Juergen Borleis @ 2015-02-27 14:07 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst | 7 +++++++
1 file changed, 7 insertions(+)
create mode 100644 Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst
diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst b/Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst
new file mode 100644
index 0000000..adf5d26
--- /dev/null
+++ b/Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst
@@ -0,0 +1,7 @@
+Phytec phyCORE-i.MX35
+=====================
+
+Building the bootloader image for this target is covered by the ``phytec-phycore-imx35_defconfig``.
+
+Use the corresponding ``barebox.bin`` file for this target. This image can be
+used for booting in ``internal mode`` from NAND or NOR memory.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/5] phyCORE-PXA270: switch to the new environment template
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
2015-02-27 14:07 ` [PATCH 1/5] Docs: add some info about the Phytec's phyCORE-i.MX35 Juergen Borleis
@ 2015-02-27 14:07 ` Juergen Borleis
2015-02-27 14:07 ` [PATCH 3/5] Docs: add some info about the Phytec's phyCORE-PXA270 Juergen Borleis
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Juergen Borleis @ 2015-02-27 14:07 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
arch/arm/boards/phytec-phycore-pxa270/env/config | 45 ----------------------
.../phytec-phycore-pxa270/env/init/mtdparts-nor | 11 ++++++
.../env/nv/linux.bootargs.base | 1 +
arch/arm/configs/phytec-phycore-pxa270_defconfig | 45 +++++++++++-----------
4 files changed, 34 insertions(+), 68 deletions(-)
delete mode 100644 arch/arm/boards/phytec-phycore-pxa270/env/config
create mode 100644 arch/arm/boards/phytec-phycore-pxa270/env/init/mtdparts-nor
create mode 100644 arch/arm/boards/phytec-phycore-pxa270/env/nv/linux.bootargs.base
diff --git a/arch/arm/boards/phytec-phycore-pxa270/env/config b/arch/arm/boards/phytec-phycore-pxa270/env/config
deleted file mode 100644
index d427800..0000000
--- a/arch/arm/boards/phytec-phycore-pxa270/env/config
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
- kernelimage="$user"-"$kernelimage"
- nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
- rootfsimage="$user"-"$rootfsimage"
-else
- nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttyS0,115200"
-
-nor_parts="512k(barebox)ro,256k(bareboxenv),4M(kernel),-(root)"
-rootfs_mtdblock_nor=3
-
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/phytec-phycore-pxa270/env/init/mtdparts-nor b/arch/arm/boards/phytec-phycore-pxa270/env/init/mtdparts-nor
new file mode 100644
index 0000000..e617cba
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-pxa270/env/init/mtdparts-nor
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NOR partitions"
+ exit
+fi
+
+mtdparts="512k(nor0.barebox),256k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
+kernelname="physmap-flash.0"
+
+mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/phytec-phycore-pxa270/env/nv/linux.bootargs.base b/arch/arm/boards/phytec-phycore-pxa270/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..476b1fb
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-pxa270/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyS0,115200
diff --git a/arch/arm/configs/phytec-phycore-pxa270_defconfig b/arch/arm/configs/phytec-phycore-pxa270_defconfig
index 57eaff0..304624b 100644
--- a/arch/arm/configs/phytec-phycore-pxa270_defconfig
+++ b/arch/arm/configs/phytec-phycore-pxa270_defconfig
@@ -8,50 +8,48 @@ CONFIG_MMU=y
CONFIG_MALLOC_SIZE=0x1000000
CONFIG_MALLOC_TLSF=y
CONFIG_KALLSYMS=y
-CONFIG_LONGHELP=y
-CONFIG_GLOB=y
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/phytec-phycore-pxa270/env"
CONFIG_DEBUG_INFO=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_AUTOMOUNT=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_MEMINFO=y
+CONFIG_LONGHELP=y
CONFIG_CMD_IOMEM=y
-CONFIG_CMD_FLASH=y
+CONFIG_CMD_MEMINFO=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_BOOTM_VERBOSE=y
CONFIG_CMD_BOOTM_INITRD=y
CONFIG_CMD_BOOTM_OFTREE=y
CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTZ is not set
# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_GPIO=y
+CONFIG_CMD_SAVEENV=y
CONFIG_CMD_UNCOMPRESS=y
-CONFIG_NET=y
+CONFIG_CMD_SLEEP=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SPLASH=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_NET=y
CONFIG_DRIVER_SERIAL_PXA=y
CONFIG_DRIVER_NET_SMC91111=y
# CONFIG_SPI is not set
@@ -59,4 +57,5 @@ CONFIG_MTD=y
CONFIG_DRIVER_CFI=y
CONFIG_VIDEO=y
CONFIG_DRIVER_VIDEO_PXA=y
+CONFIG_FS_TFTP=y
CONFIG_LZO_DECOMPRESS=y
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 3/5] Docs: add some info about the Phytec's phyCORE-PXA270
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
2015-02-27 14:07 ` [PATCH 1/5] Docs: add some info about the Phytec's phyCORE-i.MX35 Juergen Borleis
2015-02-27 14:07 ` [PATCH 2/5] phyCORE-PXA270: switch to the new environment template Juergen Borleis
@ 2015-02-27 14:07 ` Juergen Borleis
2015-02-27 14:07 ` [PATCH 4/5] phyCORE-MPC5200-Tiny: switch to the new environment template Juergen Borleis
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Juergen Borleis @ 2015-02-27 14:07 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/pxa.rst | 11 +++++++++++
Documentation/boards/pxa/Phytec-phyCORE-PXA270.rst | 6 ++++++
2 files changed, 17 insertions(+)
create mode 100644 Documentation/boards/pxa.rst
create mode 100644 Documentation/boards/pxa/Phytec-phyCORE-PXA270.rst
diff --git a/Documentation/boards/pxa.rst b/Documentation/boards/pxa.rst
new file mode 100644
index 0000000..da848a0
--- /dev/null
+++ b/Documentation/boards/pxa.rst
@@ -0,0 +1,11 @@
+PXA boards
+----------
+
+Not all supported boards have a description here.
+
+.. toctree::
+ :glob:
+ :numbered:
+ :maxdepth: 1
+
+ pxa/*
diff --git a/Documentation/boards/pxa/Phytec-phyCORE-PXA270.rst b/Documentation/boards/pxa/Phytec-phyCORE-PXA270.rst
new file mode 100644
index 0000000..23b2829
--- /dev/null
+++ b/Documentation/boards/pxa/Phytec-phyCORE-PXA270.rst
@@ -0,0 +1,6 @@
+Phytec phyCORE-PXA270
+=====================
+
+Building the bootloader image for this target is covered by the ``phytec-phycore-pxa270_defconfig``.
+
+Use the corresponding ``barebox.bin`` file for this target.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4/5] phyCORE-MPC5200-Tiny: switch to the new environment template
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
` (2 preceding siblings ...)
2015-02-27 14:07 ` [PATCH 3/5] Docs: add some info about the Phytec's phyCORE-PXA270 Juergen Borleis
@ 2015-02-27 14:07 ` Juergen Borleis
2015-02-27 14:07 ` [PATCH 5/5] Docs: add some info about the Phytec's phyCORE-MPC5200-Tiny Juergen Borleis
2015-03-01 7:12 ` A little bit fixing and extending the existing documentation Sascha Hauer
5 siblings, 0 replies; 9+ messages in thread
From: Juergen Borleis @ 2015-02-27 14:07 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
arch/ppc/boards/pcm030/env/init/mtdparts-nor | 11 ++++++
arch/ppc/boards/pcm030/env/nv/linux.bootargs.base | 1 +
arch/ppc/configs/pcm030_defconfig | 42 +++++++++++------------
3 files changed, 33 insertions(+), 21 deletions(-)
create mode 100644 arch/ppc/boards/pcm030/env/init/mtdparts-nor
create mode 100644 arch/ppc/boards/pcm030/env/nv/linux.bootargs.base
diff --git a/arch/ppc/boards/pcm030/env/init/mtdparts-nor b/arch/ppc/boards/pcm030/env/init/mtdparts-nor
new file mode 100644
index 0000000..e900a3b
--- /dev/null
+++ b/arch/ppc/boards/pcm030/env/init/mtdparts-nor
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NOR partitions"
+ exit
+fi
+
+mtdparts="512k(nor0.bareboxlow),4M(nor0.kernel),512k(nor0.oftree),26M(nor0.root),512k(nor0.barebox),512k(nor0.bareboxenv)"
+kernelname="physmap-flash.0"
+
+mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/ppc/boards/pcm030/env/nv/linux.bootargs.base b/arch/ppc/boards/pcm030/env/nv/linux.bootargs.base
new file mode 100644
index 0000000..31ce0e7
--- /dev/null
+++ b/arch/ppc/boards/pcm030/env/nv/linux.bootargs.base
@@ -0,0 +1 @@
+console=ttyPSC0,115200
diff --git a/arch/ppc/configs/pcm030_defconfig b/arch/ppc/configs/pcm030_defconfig
index 204f946..7b84e2f 100644
--- a/arch/ppc/configs/pcm030_defconfig
+++ b/arch/ppc/configs/pcm030_defconfig
@@ -1,42 +1,42 @@
CONFIG_TEXT_BASE=0x3e00000
CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_LONGHELP=y
-CONFIG_GLOB=y
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_MEMINFO=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/ppc/boards/pcm030/env"
+CONFIG_LONGHELP=y
CONFIG_CMD_IOMEM=y
-CONFIG_CMD_FLASH=y
+CONFIG_CMD_MEMINFO=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_LOADENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
CONFIG_CMD_UNCOMPRESS=y
-CONFIG_NET=y
+CONFIG_CMD_SLEEP=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
-CONFIG_ARCH_MPC5XXX=y
-CONFIG_MACH_PHYCORE_MPC5200B_TINY=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_NET=y
CONFIG_DRIVER_NET_MPC5200=y
CONFIG_MTD=y
CONFIG_DRIVER_CFI=y
CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_FS_TFTP=y
CONFIG_ZLIB=y
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 5/5] Docs: add some info about the Phytec's phyCORE-MPC5200-Tiny
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
` (3 preceding siblings ...)
2015-02-27 14:07 ` [PATCH 4/5] phyCORE-MPC5200-Tiny: switch to the new environment template Juergen Borleis
@ 2015-02-27 14:07 ` Juergen Borleis
2015-03-01 7:12 ` A little bit fixing and extending the existing documentation Sascha Hauer
5 siblings, 0 replies; 9+ messages in thread
From: Juergen Borleis @ 2015-02-27 14:07 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/powerpc.rst | 11 +++++++++++
Documentation/boards/powerpc/Phytec-phyCORE-MPC5200-Tiny | 6 ++++++
2 files changed, 17 insertions(+)
create mode 100644 Documentation/boards/powerpc.rst
create mode 100644 Documentation/boards/powerpc/Phytec-phyCORE-MPC5200-Tiny
diff --git a/Documentation/boards/powerpc.rst b/Documentation/boards/powerpc.rst
new file mode 100644
index 0000000..94b272c
--- /dev/null
+++ b/Documentation/boards/powerpc.rst
@@ -0,0 +1,11 @@
+PowerPC boards
+--------------
+
+Not all supported boards have a description here.
+
+.. toctree::
+ :glob:
+ :numbered:
+ :maxdepth: 1
+
+ powerpc/*
diff --git a/Documentation/boards/powerpc/Phytec-phyCORE-MPC5200-Tiny b/Documentation/boards/powerpc/Phytec-phyCORE-MPC5200-Tiny
new file mode 100644
index 0000000..6970027
--- /dev/null
+++ b/Documentation/boards/powerpc/Phytec-phyCORE-MPC5200-Tiny
@@ -0,0 +1,6 @@
+Phytec phyCORE-MPC5200-Tiny
+===========================
+
+Building the bootloader image for this target is covered by the ``pcm030_defconfig``.
+
+Use the corresponding ``barebox.bin`` file for this target.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: A little bit fixing and extending the existing documentation
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
` (4 preceding siblings ...)
2015-02-27 14:07 ` [PATCH 5/5] Docs: add some info about the Phytec's phyCORE-MPC5200-Tiny Juergen Borleis
@ 2015-03-01 7:12 ` Sascha Hauer
5 siblings, 0 replies; 9+ messages in thread
From: Sascha Hauer @ 2015-03-01 7:12 UTC (permalink / raw)
To: Juergen Borleis; +Cc: barebox
On Fri, Feb 27, 2015 at 03:07:28PM +0100, Juergen Borleis wrote:
> This time I changed two older platforms to the new default environment and
> added some more documentation snippets.
>
> The result of the change to the new default environment was tested on real
> targets.
Applied all, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: A little bit fixing and extending the existing documentation
2015-01-26 10:39 Juergen Borleis
@ 2015-01-27 7:39 ` Sascha Hauer
0 siblings, 0 replies; 9+ messages in thread
From: Sascha Hauer @ 2015-01-27 7:39 UTC (permalink / raw)
To: Juergen Borleis; +Cc: barebox
On Mon, Jan 26, 2015 at 11:39:47AM +0100, Juergen Borleis wrote:
> Just some minor changes...
Thanks. Applied all but the second patch.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
* A little bit fixing and extending the existing documentation
@ 2015-01-26 10:39 Juergen Borleis
2015-01-27 7:39 ` Sascha Hauer
0 siblings, 1 reply; 9+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Just some minor changes...
jbe
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-03-01 7:12 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-02-27 14:07 A little bit fixing and extending the existing documentation Juergen Borleis
2015-02-27 14:07 ` [PATCH 1/5] Docs: add some info about the Phytec's phyCORE-i.MX35 Juergen Borleis
2015-02-27 14:07 ` [PATCH 2/5] phyCORE-PXA270: switch to the new environment template Juergen Borleis
2015-02-27 14:07 ` [PATCH 3/5] Docs: add some info about the Phytec's phyCORE-PXA270 Juergen Borleis
2015-02-27 14:07 ` [PATCH 4/5] phyCORE-MPC5200-Tiny: switch to the new environment template Juergen Borleis
2015-02-27 14:07 ` [PATCH 5/5] Docs: add some info about the Phytec's phyCORE-MPC5200-Tiny Juergen Borleis
2015-03-01 7:12 ` A little bit fixing and extending the existing documentation Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2015-01-26 10:39 Juergen Borleis
2015-01-27 7:39 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox