mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: v2015.03.0
Date: Fri, 6 Mar 2015 07:30:46 +0100	[thread overview]
Message-ID: <20150306063046.GL11010@pengutronix.de> (raw)

Hi All,

Here comes the release for march.

Not many new features, but fixes and cleanups all over the place, so
this release should be a good one ;)

See below for a list of patches that went into this release.

Sascha

----------------------------------------------------------------
Andrey Panov (2):
      MMC: IMX: Reset MMC_BOOT register after controller reset.
      ARM: IMX: Embedsky E9: Choose right environment when booting from SD or EMMC.

Andrey Smirnov (4):
      i.MX6: phytec: Separate SoM specific code
      i.MX: SPI: Respect SPI_LSB_FIRST flag in mode settings
      i.MX6: phytec: Check environment path selection for errors
      i.MX6: phytec: Allow multiple MMC devices to contain boot environment

Antony Pavlov (3):
      scripts/checkpatch.pl: don't search for CREDITS when checking top_of_kernel_tree()
      sandbox: get malloc_size from .config
      ARM: bcm2835: fix checkpatch warning

Bo Shen (7):
      ARM: atmel: sama5d4 xplained: correct the name
      ARM: atmel: sama5d4ek: correct the typo
      ARM: atmel: sama5d3xek: let emac auto detect phy addr
      ARM: atmel: sama5d3xek: let gmac auto detect phy id
      ARM: atmel: at91sam9n12ek: correct udc device name
      usb: at91_udc: pass the vbus initial value
      ARM: atmel: sama5d4 xplained: correc env path

Borislav Petkov (1):
      gitignore: add all.config

Christian Hemp (1):
      ARM: phyFLEX-i.MX6: Add support for 1GB on 1 bank

Dmitry Lavnikevich (2):
      memtest: fix 4GB overflow fail
      dts:imx6:pfla02: Align nand partitions by 512k

Eric Bénard (3):
      dhcp: fix request packet's requested IP option
      dhcp: fix request packet
      dhcp: fix request packet's seconds elapsed

Jan Luebbe (3):
      imx53: add uart3
      commands: crc: support setting environment variables
      defaultenv: generate force-built-in (zero) environment file

Jani Nikula (1):
      gitignore: Add GNU GLOBAL files to top .gitignore

Jean-Christophe PLAGNIOL-VILLARD (8):
      console: allow to specify the device id
      raspberry-pi: add board model detection
      raspberry-pi: add leds support
      amba: pl011: add support for regulator
      driver: add postcore_platform_driver
      regulator: allow to use it with non DT device
      regulator: add bcm2835 driver
      raspberry-pi: mac address detection support

Jike Song (1):
      .gitignore: match ncscope.out

Juergen Beisert (8):
      Docs: just fix a typo
      Docs: add some info about the Ka-Ro TX25 related bootloader images
      Docs: add some info about the Phytec's phyCORE27 and phyCARD27 related bootloader images
      Docs: extend the mentioned commands with a link to their documentation
      Docs: move the individual MXS target documentation where they belong to
      Docs: the name of the default config file for the FSL i.MX23 evk has changed
      Docs: extend the mentioned commands with a link to their documentation
      Docs: add some info about the Olimex's Olinuxino related bootloader images

Lucas Stach (6):
      arm: virt_to_phys should take a volatile ptr
      net: rtl8169: silence compiler warning
      ARM: Kconfig: remove stale option CPU_V7_DCACHE_SKIP
      scripts: fix warning generated by glibc 2.20
      net: cpsw: prevent stray cache writeback
      tegra: avp_init: write DT address register earlier

Markus Pargmann (4):
      ARM: sockit: Define inst_rom_init static
      scripts: socfpga sequencer extraction tool
      ARM: boards: socfpga new mem calibration function
      ARM: socfpga: Import sequencer code from generated uboot

Masahiro Yamada (40):
      Remove the CREDITS file
      powerpc: include <linux/stringify.h> to avoid dupulicated defines
      kbuild: arm: Do not define "comma" twice
      gitignore: do not ignore .mailmap
      gitignore: remove bogus ignore patterns
      kbuild: add KBUILD_DEFCONFIG
      ARM: include some headers from barebox-arm.h
      gitignore: remove obsolete link method for arch specification
      debug_ll: change the argument type of putc_ll()
      fs: ubifs: remove redundant macro defines
      lib: decompress: remove redundant INT_MAX define
      linux/kernel.h: move *_MAX, *_MIN macros
      linux/kernel.h: rename USHORT_MAX, SHORT_MAX, SHORT_MIN
      linux/kernel.h: add more *_MAX, *_MIN macros
      linux/bug.h: move BUILD_BUG_ON*() macros
      asm-generic/bug.h: move BUG(), BUG_ON(), WARN(), WARN_ON() macros
      linux/kernel.h: move some macros and prototypes
      ARM: delete useless and wrong comments
      ARM: use an easier way to create the empty built-in.o
      ARM: fix a wrong comment about relocate_to_adr
      usb: abolish wait_ms() function
      gitignore: simplify .gitignore file with pattern "/barebox*"
      gitignore: move "barebox_default_env*" to subdirectory
      gitignore: sync with Linux's .gitignore
      kbuild: drop bogus "common/barebox_default_env*" from CLEAN_FILES
      kbuild: drop $(KBUILD_DTBS) from the all target
      blackfin: consolidate arch/blackfin/include/asm/linkage.h
      param: add error check to dev_param_set_generic()
      blackfin: fix undefined reference with CONFIG_CMD_MAGICVAR
      MAKEALL: fix do_build_all
      MAKEALL: do not create build directory explicitly
      param: add error check to __dev_add_param()
      pinctrl: remove unnecessary error check
      MAKEALL: check the return code of "make" rather than "printf"
      MAKEALL: remove false positive error check
      MAKEALL: use $(...) instead of `...` for readability
      MAKEALL: do not pass unneeded -C option to make
      MAKEALL: consolidate -j${JOBS} argument
      nios2: ignore arch/nios2/cpu/barebox.lds by git
      defaultenv: ignore barebox_zero_env

Michael Olbrich (1):
      ARM Samsung: fix booting from NAND without pbl

Robert Jarzmik (9):
      mtd: nand: add mrvl-nand driver
      ARM: pxa: move pxa2xx functionality to SoC specific file
      ARM: pxa: add pxa3xx architecture
      ARM: pxa: add the zylonite board
      net: smc1111: add 16 bits accessors, allow address shift
      net: smc1111: extend the driver for 91c94 and 91c96 support
      net: smc1111: improve debug capability
      ARM: pxa: add pxa25x support
      ARM: pxa: add lubbock board support

Sascha Hauer (40):
      ARM: MXS: imx28evk: Add lowlevel support
      ARM: MXS: imx28evk: Update environment and config
      memtest: Fix SDRAM size calculations
      ARM: MXS: Fix vddd brownout setting
      MXS: power-init: inline only once used functions
      ARM: MXS: Do not register devices with device tree support
      ARM: MXS: Make gpio a driver
      mci: mxs: Add devicetree support
      serial: stm_serial: Add devicetree support
      ARM: MXS: Create ocotp device in SoC code
      ARM: MXS: ocotp: Add devicetree support
      of: Create platform_device when creating AMBA device failed
      pbl: Add support for memory_display
      pinctrl: Add MXS pinctrl driver
      ARM: MXS: Setup vdda in power prep
      ARM: MXS: Add regulator debug print
      ARM: MXS: power-init: Add parameters to mx28_power_init()
      ARM: MXS: Add duckbill board support
      Merge branch 'for-next/am335x'
      Merge branch 'for-next/arm'
      Merge branch 'for-next/doc'
      Merge branch 'for-next/imx'
      Merge branch 'for-next/makeall'
      Merge branch 'for-next/minmax'
      Merge branch 'for-next/misc'
      Merge branch 'for-next/mxs'
      Merge branch 'for-next/net'
      Merge branch 'for-next/pxa'
      Merge branch 'for-next/raspberry-pi'
      Merge branch 'for-next/socfpga'
      blspec: put blspec bootargs into a .dyn bootargs variable
      ARM: Phytec phyCORE OMAP4460: Split xload defconfigs
      mtd: nand: omap: Fix OMAP_ECC_BCH8_CODE_HW ecc mode
      mtd: Fix allowing to erase bad blocks on partitions
      mtd: nand-bb: Fix accesses beyond device
      mtd: nand-bb: fix erasing bb devices with bad blocks
      mtd: nand-bb: Fix test for bad block when reading
      mtd: nand-bb: Also print raw position in debug messages
      environment: Do not remove base env directory
      Release v2015.03.0

Stefan Christ (3):
      ARM: i.MX6: Fix bad block marker in imx6-bbu-nand handler
      imx6: add partitions on SPI NOR for PFLA02
      ARM: i.MX6: use generic calculation in nand bbu handler

Steffen Trumtrar (5):
      ARM: socfpga: avoid using external regulator for PLL
      ARM: socfpga: clkmgr: set alteragrp clocks
      ARM: socfpga: clkmgr: bypass debug root clock
      ARM: socfpga: clock-manager: set mainnandsdmmcclk
      ARM: socfpga: cleanup sequencer warnings

Uwe Kleine-König (1):
      trivial: s/flasg/flash/

Wadim Egorov (2):
      ARM: dts: am335x-phytec-phycore-som: Add USB host support
      ARM: dts: am335x-phytec-phyflex: Add USB host support

Wjatscheslaw Stoljarski (1):
      loadenv: fix typo in help text

gregory hermant (1):
      add support for the haba-knx-lite controller

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

                 reply	other threads:[~2015-03-06  6:31 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150306063046.GL11010@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox