* v2015.04.0
@ 2015-04-13 8:41 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2015-04-13 8:41 UTC (permalink / raw)
To: Barebox List
We have a release for April. It's a little bit delayed due to my
holidays, but here it is.
This release brings the long overdue conversion to streaming dma ops
for drivers. Thanks Lucas.
For a detailed list of changes see below.
Sascha
----------------------------------------------------------------
Andrey Panov (20):
ARM: Rockchip: Add DEBUG_LL based on mach-socfpga
lib: Add gcd() function
CLK: Add support for composite clock from Linux kernel
CLK: Add fractional divider clock support from Linux kernel
CLK: clk-mux: Respect CLK_MUX_HIWORD_MASK flag
CLK: clk-divider: Respect CLK_DIVIDER_HIWORD_MASK flag
CLK: clk-divider: Introduce clk_divider_alloc() and *_free() routines
CLK: clk-divider: Respect CLK_DIVIDER_POWER_OF_TWO flag
CLK: Check and do not allow to register clock twice
CLK: Add helper defines to barebox-wrapper.h for easier porting of drivers from Linux kernel
NET: arc_emac: Update for newer DTS, support for Rockchip .compatible
ARM: Rockchip: Update Kconfig
ARM: Rockchip: Update clk driver from Linux kernel for use with newer DTS
ARM: Rockchip: Use newer DTS for Radxa Rock board
ARM: Rockchip: Update Radxa Rock board
ARM: Rockchip: Remove unused files from mach-rockchip
ARM: Rockchip: Add documentation
MMC: dw_mmc: Add support for PIO mode and Rockchip variant of this hardware
MMC: dw_mmc: PIO mode fixes
ARM: Rockchip: Update defconfig
Andrey Smirnov (1):
firmware: altera: Make nSTAT GPIO optional
Antony Pavlov (5):
openrisc: barebox.lds.S: fix BFD format names
MIPS: qemu-malta_defconfig: set BAUDRATE=38400
MIPS: qemu-malta: debug_ll: fix serial port speed
MIPS: add gxemul-malta_defconfig
make PBL_CONSOLE depend on PBL_IMAGE
Bo Shen (1):
ARM: atmel: at91sam9n12: add subtype support
Brian Norris (1):
mtd: nand: cleanup ONFI printed errors, warnings
Doug Brainard (1):
SAMA5D4EK - Now uses the new environment.
Hubert Feurstein (2):
common/bootargs: add blkdevparts variables
led: gpio: add support for default-state dt-property
Jan Luebbe (4):
ARM/mem: handle data aborts gracefully for md
scripts/dtc: import update-dtc-source.sh from kernel v4.0-rc1
scripts/dtc: Update to upstream version 1.4.1
Documentation: handle missing group declaration
Jean-Christophe PLAGNIOL-VILLARD (5):
imx_v7_defconfig: enable at least PNG support for splash
imx6q-embedsky-e9: the debug port is on uart1 not uart4
imx6q-embedsky-e9: there is not PCIe on this hardware
imx6q-embedsky-e9: we use the i2c2 for hdmi
gitignore: only ignore include/config.h
Juergen Beisert (5):
Docs: add some info about the Phytec's phyCORE-i.MX35
phyCORE-PXA270: switch to the new environment template
Docs: add some info about the Phytec's phyCORE-PXA270
phyCORE-MPC5200-Tiny: switch to the new environment template
Docs: add some info about the Phytec's phyCORE-MPC5200-Tiny
Lucas Stach (57):
imd: provide dummy imd_command_setenv
ARM: do not specify -static and -pie at the same time
net: designware: don't depend on CONFIG_OFTREE
menu: depend on !CONFIG_SHELL_NONE
ARM: MIOA701: select POLLER
of: make of_alias_get work on all types of DT paths
ARM: tegra20: add mmc aliases
ARM: tegra30: add mmc aliases
ARM: tegra124: add mmc aliases
mci: tegra: handle mmc aliases
bbu: include necessary headers
bbu: make bbu confirm a bit more verbose
ARM: tegra: add eMMC barebox update handler
ARM: tegra: add barebox update handler to Beaver board
ARM: tegra: add barebox update handler to Jetson board
ARM: tegra: enable barebox update in defconfig
arm: hummingboard: fix fallout from upstream DT usage
usb: gadget: include common.h in header
NIOS2: use dma_addr_t in dma_alloc_coherent
MIPS: change dma_alloc/free_coherent to common prototypes
ARM: change dma_alloc/free_coherent to match other architectures
ARM: move virt<->phys translation to io.h
dma: add streaming DMA ops
ARM: move DMA alloc functions to dma.h
ARM: implement streaming DMA ops
AHCI: convert to streaming DMA ops
MCI: dw-mmc: convert to streaming DMA ops
MCI: imx: convert to streaming DMA ops
MCI: tegra-sdmmc: convert to streaming DMA ops
net: arc-emac: convert to streaming DMA ops
net: cpsw: convert to streaming DMA ops
net: at91_ether: convert to streaming DMA ops
net: davinci_emac: convert to streaming DMA ops
net: designware: convert to streaming DMA ops
net: fec: convert to streaming DMA ops
net: macb: convert to streaming DMA ops
net: orion-gbe: convert to streaming DMA ops
net: rtl8169: convert to streaming DMA ops
net: xgmac: convert to streaming DMA ops
usb: gadget: fsl_udc: convert to streaming DMA ops
usb: host: ehci: convert to streaming DMA ops
usb: host: ohci: convert to streaming DMA ops
ARM: bcm2835: mbox: convert to streaming DMA ops
ARM: MMU: unexport cache maintenance functions
pbl: let pbl-console depend on !CONSOLE_NONE
ARM: versatile: provide clk_set_rate stub
ARM: zynq: zedboard: don't select serial
ARM: radxa-rock: select options for regulator
parameter: include header for ERR_PTR and errno
PCI: fix bad bugs in bridge setup code
net: mvneta: convert to streaming DMA ops
ARM: highbank: fix build with recent binutils
clk: fractional-divider: fix build with CONFIG_MODULES
usb: host: xhci: depend on HAS_DMA
docs: correct link to microcom repo
ARM: tegra124: remove serial aliases
pci: make sure to activate devices on the root bus
Marc Kleine-Budde (22):
drivers: remove unused function dev_protect()
fs: make "offset" parameter of erase() and protect() 64 bit safe
of_path: of_find_path(): remove unused variable len
of/base: fix sparse warning, don't use integer 0 as NULL pointer
of: add no-op function for of_register_fixup()
of: add no-op functions for of_find_node_by_alias() and of_find_node_by_path_or_alias()
sandbox: fix indention in help text
sandbox: add support to pass dtb to barebox
sandbox: add sample dts
sandbox: activate OF support in defconfig
sandbox: hostfile: clarify variable names
sandbox: hostfile: probe(): add missing pointer from cdev.dev to dev
sandbox: hostfile: remove struct hf_platform_data from hf_priv
sandbox: hostfile: move fd from platform data to priv
sandbox: hostfile: probe driver earlier
sandbox: hostfile: use the memory resource to determine the size not the platform_data
sandbox: hostfile: is always mmpad'ed
sandbox: move device name generation for image/env into add_image()
sandbox: hostfile: improve --image parameter to support "dev=file"
sandbox: hostfile: completely switch to OF based probing
environment: envfs_{load, save}: add possibility to call with filename and dirname == NULL
paramter: The dev_add_param_*() return ERR_PTR(), change no-ops to return ERR_PTR(-ENOSYS) instead of NULL
Masahiro Yamada (1):
pbl: remove start_barebox() stub
Michael Grzeschik (1):
ARM: Vincell: add usb device
Michael Olbrich (3):
defaultenv-2: init: don't call timeout again if the user intervened
friendlyarm-mini2440: add support for the W35 display
ARM Samsung: add simple NAND barebox update handler
Robert Jarzmik (1):
net: smc1111: fix platform data initializations
Robert Schwebel (2):
Documentation: fix am335x title
Documentation: rename powerpc manual to .rst
Sascha Hauer (67):
dts: update to v3.18-rc3
dts: update to v3.18-rc4
dts: update to v3.18-rc5
dts: update to v3.18-rc6
dts: update to v3.18-rc7
dts: update to v3.19-rc1
dts: update to v3.19-rc3
dts: update to v3.19-rc5
dts: update to v3.19-rc6
dts: update to v3.19-rc7
ARM: remove unused variable
of: Add for_each_child_of_node_safe
mtd: core: add error checks
mtd: partitions: Use xstrdup
mtd: partitions: Add error check
mtd: Add partitions to list
mtd: nand: remove automatically created bb devices
move cmdline partition parsing code to separate file
cmdlinepart: Change SIZE_REMAINING to loff_t
cmdlinepart: make argument types safer
cmdlinepart: add function to parse a cmdline partition string
cmndlinepart: skip devname if partstr already contains it
mtd: forbid conflicting mtd partitions
mtd: Use flags parameter in mtd_add_partition
mtd: Add a partitions parameter to mtd devices
mtd: fixup device tree partitions
defaultenv-2: mtdparts-add: remove unused variable
defaultenv-2: mtdparts-add: Use new partition parameter
OMAP and i.MX boards: do not set console= commandline parameter in environment
boards: Use nv.linux.bootargs.console for setting the console= commandline parameter
ARM: Allow to mask data aborts
reset_source: make safe to call earlier
dts: update to v3.19
dts: update to v4.0-rc1
ARM: i.MX53 QSB: remove unused /dev/env0 partition
console: Make locally used function static
clk: Treat NULL as dummy clocks
Merge branch 'for-next/am335x'
Merge branch 'for-next/dts'
Merge branch 'for-next/mtd'
Merge branch 'for-next/mtd-partitions'
Merge branch 'for-next/sandbox-of'
Merge branch 'for-next/at91'
Merge branch 'for-next/dtc'
ARM: i.MX: boards: Setup stack before calling imx*_barebox_entry
ARM: i.MX: remove __naked from imx*_barebox_entry
PWM: i.MX: register successfully without alias
ARM: i.MX5: Do not register fixed clocks twice
ARM: i.MX: remove i.MX6 ARM2 board support
ARM: i.MX6: switch to COMMON_CLK_OF_PROVIDER
fs: rename inode member of struct filep to priv
Merge branch 'for-next/arm'
Merge branch 'for-next/fs'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/openrisc'
Merge branch 'for-next/rockchip'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/streaming-dma'
Merge branch 'for-next/tegra'
Use linux.bootargs.console for specifying the console
clk: clk-divider: fix _get_maxdiv for table based divider
lib: Add hex2bin and bin2hex implementations
Documentation: booting-linux: Fix wrong variable name
ARM: i.MX6: Add clock for ocotp
Release v2015.04.0
Sebastian Hesselbarth (1):
net: mvneta: Fix transmit errors due to dirty txdesc
Stefan Müller-Klieser (2):
Revert "lzo: properly check for overruns"
lzo: check for length overrun in variable length encoding.
Steffen Trumtrar (5):
scripts: add socfpga preloader-files importer
scripts: socfpga: add coccinelle magic
ARM: socfpga: add Altera SoCFPGA Development Kit support
scripts: socfpga: statify sys_mgr_init_table
ARM: socfpga: socdk: statify sys_mgr_init_table
Teresa Gámez (9):
ARM: Fix nv variable bootargs.base
ARM: phyFLEX-AM335x-SOM: Update NAND partition table
ARM: phyCORE-AM335x-SOM: Update NAND partition table
ARM: phytec-som-am335x: Fix rootfs bootargs
ARM: am335x_defconfig: Add ext4 support
ARM: phytec-som-am335x: Remove mmc rootfstype
ARM: phycore-am335x-som: Fix boards with no SPI
mtd: nand_omap_gpmc: Remove unused code
mtd: nand_omap_gpmc: Fix ecc check for bch8 romcode
Ulrich Ölmann (2):
docs: remove trailing whitespaces
docs: fix typos
Uwe Kleine-König (2):
mtd: nand-imx: fix byte reading in x16 mode
mtd: nand-imx: don't copy more bytes than read from hardware
Wadim Egorov (8):
ARM: am335x: phyFLEX-AM335x: Split DT and add MLO DT
ARM: dts: Add a new compatible type for am335x phytec SOMs
boards: Add phytec-som-am335x
Docs: Add phytec-som-am335x documentation
reset_source: Add external reset
ARM: am33xx: Add support for reset reason detection
boards: phytec-som-am335x: Add phycard-som support
mci: core: Check return value of dev_add_param_bool
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-04-13 8:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-13 8:41 v2015.04.0 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox