From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v3 00/18] i.MX serial cleanup, bootstrap code fixes, boot via IRAM
Date: Thu, 7 May 2015 09:51:08 +0200 [thread overview]
Message-ID: <20150507075108.GM6325@pengutronix.de> (raw)
In-Reply-To: <1430940733-4415-1-git-send-email-andrew.smirnov@gmail.com>
Hi Andrey,
I applied this series with some small changes.
Thanks
Sascha
On Wed, May 06, 2015 at 12:31:55PM -0700, Andrey Smirnov wrote:
> This patch set combines all previously sent patches together:
>
> - Serial cleanups
> - Bootstap code fixes/cleanup
> - Boot via IRAM
>
> I marked the whole thing as a version 3 since some of the included
> patches in some of their incarnations had version 2 and I wanted to
> decrease the amount of confusion I was creating :)
>
> Andrey Smirnov (18):
> i.MX: Move UART definitions into a separate file
> i.MX: serial: Add constants for UART clock divisor
> i.MX: serial: Add baud rate calculation convenience functions
> i.MX: serial: Add UART init functions for DEBUG_LL
> i.MX: serial: Convert PUTC_LL to use IOMEM
> i.MX: serial: Convert i.MX51 and i.MX6 to use 'imx*_uart_setup_ll'
> i.MX51: babbage: Implement CONFIG_DEBUG_LL
> i.MX: serial: Distil common clock ungating code
> Makefile.lib: Make 'check_file_size' more flexible
> i.MX: Add provisions to boot from IRAM
> imx-image: Correctly fill image size in prepended header
> bootstrap: Fix potential memory leak in 'read_image_head'
> bootstrap_read_devfs(): Check for errors from devfs_add_partition()
> bootstrap_read_devfs(): Close file after we are done with it
> bootstrap_read_devfs(): Fix potential memory leak
> bootstrap_read_devfs(): Check for errors from dev_add_bb_dev()
> bootstrap_read_devfs(): Remove all partitions upon function completion
> bootstrap: Warn if image size in BB header is zero
>
> Documentation/boards/imx.rst | 27 +++++
> Makefile | 2 +-
> arch/arm/boards/eltec-hipercam/lowlevel.c | 18 +--
> arch/arm/boards/embest-riotboard/lowlevel.c | 16 +--
> arch/arm/boards/freescale-mx51-babbage/Makefile | 3 +
> arch/arm/boards/freescale-mx51-babbage/board.c | 60 ++++++++++
> .../flash-header-common.imxcfg | 58 ++++++++++
> .../flash-header-imx51-babbage-xload.imxcfg | 3 +
> .../flash-header-imx51-babbage.imxcfg | 60 +---------
> arch/arm/boards/freescale-mx51-babbage/lowlevel.c | 67 +++++++++++
> .../arm/boards/freescale-mx6sx-sabresdb/lowlevel.c | 20 +---
> arch/arm/boards/guf-santaro/lowlevel.c | 18 +--
> arch/arm/boards/karo-tx6x/lowlevel.c | 21 +---
> arch/arm/boards/phytec-phycard-imx6/lowlevel.c | 21 +---
> arch/arm/boards/phytec-phyflex-imx6/lowlevel.c | 21 +---
> arch/arm/boards/tqma6x/lowlevel.c | 18 +--
> arch/arm/boards/variscite-mx6/lowlevel.c | 21 +---
> arch/arm/configs/imx_v7-xload_defconfig | 52 +++++++++
> arch/arm/mach-imx/Kconfig | 15 +++
> arch/arm/mach-imx/Makefile | 1 +
> arch/arm/mach-imx/include/mach/clock-imx51_53.h | 5 +-
> arch/arm/mach-imx/include/mach/debug_ll.h | 85 ++++++++++++--
> arch/arm/mach-imx/xload.c | 52 +++++++++
> arch/arm/pbl/Makefile | 2 +-
> arch/mips/pbl/Makefile | 2 +-
> drivers/serial/serial_imx.c | 112 +-----------------
> images/Makefile.imx | 20 +++-
> include/serial/imx-uart.h | 128 +++++++++++++++++++++
> lib/bootstrap/devfs.c | 59 ++++++++--
> scripts/Makefile.lib | 6 +-
> scripts/imx/Makefile | 2 +
> scripts/imx/imx-image.c | 11 +-
> 32 files changed, 658 insertions(+), 348 deletions(-)
> create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-common.imxcfg
> create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg
> create mode 100644 arch/arm/configs/imx_v7-xload_defconfig
> create mode 100644 arch/arm/mach-imx/xload.c
> create mode 100644 include/serial/imx-uart.h
>
> --
> 2.1.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2015-05-07 7:51 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 19:31 Andrey Smirnov
2015-05-06 19:31 ` [PATCH v3 01/18] i.MX: Move UART definitions into a separate file Andrey Smirnov
2015-05-06 19:31 ` [PATCH v3 02/18] i.MX: serial: Add constants for UART clock divisor Andrey Smirnov
2015-05-06 19:31 ` [PATCH v3 03/18] i.MX: serial: Add baud rate calculation convenience functions Andrey Smirnov
2015-05-06 19:31 ` [PATCH v3 04/18] i.MX: serial: Add UART init functions for DEBUG_LL Andrey Smirnov
2015-05-07 7:52 ` Sascha Hauer
2015-05-06 19:32 ` [PATCH v3 05/18] i.MX: serial: Convert PUTC_LL to use IOMEM Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 06/18] i.MX: serial: Convert i.MX51 and i.MX6 to use 'imx*_uart_setup_ll' Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 07/18] i.MX51: babbage: Implement CONFIG_DEBUG_LL Andrey Smirnov
2015-05-07 7:57 ` Sascha Hauer
2015-05-06 19:32 ` [PATCH v3 08/18] i.MX: serial: Distil common clock ungating code Andrey Smirnov
2015-05-07 7:56 ` Sascha Hauer
2015-05-06 19:32 ` [PATCH v3 09/18] Makefile.lib: Make 'check_file_size' more flexible Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 10/18] i.MX: Add provisions to boot from IRAM Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 11/18] imx-image: Correctly fill image size in prepended header Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 12/18] bootstrap: Fix potential memory leak in 'read_image_head' Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 13/18] bootstrap_read_devfs(): Check for errors from devfs_add_partition() Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 14/18] bootstrap_read_devfs(): Close file after we are done with it Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 15/18] bootstrap_read_devfs(): Fix potential memory leak Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 16/18] bootstrap_read_devfs(): Check for errors from dev_add_bb_dev() Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 17/18] bootstrap_read_devfs(): Remove all partitions upon function completion Andrey Smirnov
2015-05-06 19:32 ` [PATCH v3 18/18] bootstrap: Warn if image size in BB header is zero Andrey Smirnov
2015-05-07 7:51 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150507075108.GM6325@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox