From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-lb0-x229.google.com ([2a00:1450:4010:c04::229]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Z4wLE-0001BU-Ue for barebox@lists.infradead.org; Tue, 16 Jun 2015 19:16:14 +0000 Received: by lblr1 with SMTP id r1so17346535lbl.0 for ; Tue, 16 Jun 2015 12:15:50 -0700 (PDT) Date: Tue, 16 Jun 2015 22:22:04 +0300 From: Antony Pavlov Message-Id: <20150616222204.e62fcf9d7ba5152e480de395@gmail.com> In-Reply-To: <1434481487.2184.5.camel@lynxeye.de> References: <1433879479-11300-1-git-send-email-antonynpavlov@gmail.com> <1434481487.2184.5.camel@lynxeye.de> Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [RFC] PCI: skip pci host bridge as early as possible To: Lucas Stach Cc: barebox@lists.infradead.org On Tue, 16 Jun 2015 21:04:47 +0200 Lucas Stach wrote: > Hi Antony, > = > I don't think ignoring the host bridge is the right thing to do in the > first place and unfortunately I'm unable to reproduce your problem. What is your qemu version? Anyway linux PCI initialization code differ from barebox PCI initialization= code: linux code tries to revert PBAR contents after determening PBAR sizes. Here is the patch that adds linux PCI setup behaviour to barebox: diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7953c55..b60bd5b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -141,9 +141,12 @@ static void setup_device(struct pci_dev *dev, int max_= bar) = for (bar =3D 0; bar < max_bar; bar++) { resource_size_t last_addr; + u32 l; = + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &l); pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe); pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, l); = if (mask =3D=3D 0 || mask =3D=3D 0xffffffff) { pr_debug("pbar%d set bad mask\n", bar); > Am Dienstag, den 09.06.2015, 22:51 +0300 schrieb Antony Pavlov: > > The barebox' pci_scan_bus() function first tries to setup GT64120 > > host bridge BARs but fails: > > = > > barebox:/ dmesg > > pci: pci_scan_bus for bus 0 > > pci: last_io =3D 0x18000000, last_mem =3D 0x10000000, last_mem_pre= f =3D 0x00000000 > > pci: class =3D 00000600, hdr_type =3D 00000000 > > pci: 00:00 [11ab:4620] > > pci: pbar0: mask=3D00000008 NP memory 0 bytes > > pci: pbar1: mask=3D01000008 NP memory -16777216 bytes > > pci: pbar2: mask=3D1c000000 NP memory -469762048 bytes > > pci: BAR does not fit within bus np-mem res > > pci: skip pci host bridge > > = > I can reproduce up until here. But the messages suggest that barebox is > in fact skipping the BAR configuration, so this isn't really a problem. > = > This might be improved by checking for invalid BAR sizes before trying > to fit them. > = > > so PCI host bridge and all discovered devices are misconfigured, e.g. > > miitool can't find rtl8139 emulated NIC tranceiver: > > = > > rtl8139_eth pci-10ec:8139.0: rtl8139 (rev 20) at 90: 0200 (base=3D8= f000000) > > rtl8139_eth pci-10ec:8139.0: enabling bus mastering > > ... > > barebox:/ miitool > > miibus0: registered phy as /dev/phy0 > > phy0: eth0: No MII transceiver present!. > > = > = > Works for me: > = > barebox:/ miitool > miibus0: registered phy as /dev/phy0 > phy0: eth0: no autonegotiation, 100baseTx-FD flow-control, link ok > = > > Here is linux-3.19 GT64120 host bridge discovery log: > > = > > PCI host bridge to bus 0000:00 > > pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] > > pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] > > pci_bus 0000:00: No busn resource found for root bus, will use [bus= 00-ff] > > pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) > > pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) > > pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) > > pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) > > pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) > > = > > The appropriate lspci -v log: > > = > > 00:00.0 Host bridge: Marvell Technology Group Ltd. GT-64120/64120A/= 64121A System Controller (rev 10) > > Subsystem: Red Hat, Inc Device 1100 > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-= ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >= TAbort- SERR- > Interrupt: pin A routed to IRQ 0 > > Subsystem: Red Hat, Inc Device 1100 > > Flags: medium devsel > > Memory at (32-bit, prefetchable) [disabled] > > Memory at (32-bit, prefetchable) [disabled] > > Memory at (32-bit, non-prefetchable) [disabled] > > Memory at (32-bit, non-prefetchable) [disabled] > > Memory at (32-bit, non-prefetchable) [disabled] > > I/O ports at [disabled] > > = > > It looks like qemu-system-mips does not fully emulates GT64120 host > > bridge BARs so skipping host bridge BAR's setup fixes qemu-malta > > problem. But can we skip host bridge BAR's setup for other targets? > > = > > Signed-off-by: Antony Pavlov > > --- > > drivers/pci/pci.c | 10 +++++----- > > 1 file changed, 5 insertions(+), 5 deletions(-) > > = > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 3a0e7a5..7953c55 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -331,6 +331,11 @@ unsigned int pci_scan_bus(struct pci_bus *bus) > > pr_debug("%02x:%02x [%04x:%04x]\n", bus->number, dev->devfn, > > dev->vendor, dev->device); > > = > > + if (class =3D=3D PCI_CLASS_BRIDGE_HOST) { > > + pr_debug("skip pci host bridge\n"); > > + continue; > > + } > > + > > switch (hdr_type & 0x7f) { > > case PCI_HEADER_TYPE_NORMAL: > > if (class =3D=3D PCI_CLASS_BRIDGE_PCI) > > @@ -391,11 +396,6 @@ unsigned int pci_scan_bus(struct pci_bus *bus) > > bus->number, dev->devfn, dev->vendor, dev->device, class, hd= r_type); > > continue; > > } > > - > > - if (class =3D=3D PCI_CLASS_BRIDGE_HOST) { > > - pr_debug("skip pci host bridge\n"); > > - continue; > > - } > > } > > = > > /* > = > = -- = --=A0 Best regards, =A0 Antony Pavlov _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox