From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: v2015.07.0
Date: Fri, 3 Jul 2015 06:46:20 +0200 [thread overview]
Message-ID: <20150703044620.GE18700@pengutronix.de> (raw)
We have a release for July. Much work has gone into the state framework
this time. If you haven't done already check it out here:
http://barebox.org/doc/latest/devicetree/bindings/barebox/barebox,state.html
It's a nice way to store variables in a very well defined way in small
EEPROMs and such.
Other than that the memory commands now support 64bit accesses and
memory dumps using the -q option.
Steffen has adopted the spi-nor framework from the kernel so we can now
support the qspi flashes on SoCFPGA.
For a detailed list of patches that went into this release see below.
Sascha
----------------------------------------------------------------
Alexander Richter (1):
ubiformat: fix argument parser
Andrey Smirnov (23):
i.MX: Move UART definitions into a separate file
i.MX: serial: Add constants for UART clock divisor
i.MX: serial: Add baud rate calculation convenience functions
i.MX: serial: Add UART init functions for DEBUG_LL
i.MX: serial: Convert PUTC_LL to use IOMEM
i.MX: serial: Convert i.MX51 and i.MX6 to use 'imx*_uart_setup_ll'
i.MX51: babbage: Implement CONFIG_DEBUG_LL
i.MX: serial: Distil common clock ungating code
Makefile.lib: Make 'check_file_size' more flexible
i.MX: Add provisions to boot from IRAM
imx-image: Correctly fill image size in prepended header
bootstrap: Fix potential memory leak in 'read_image_head'
bootstrap_read_devfs(): Check for errors from devfs_add_partition()
bootstrap_read_devfs(): Close file after we are done with it
bootstrap_read_devfs(): Fix potential memory leak
bootstrap_read_devfs(): Check for errors from dev_add_bb_dev()
bootstrap_read_devfs(): Remove all partitions upon function completion
bootstrap: Warn if image size in BB header is zero
common/memtest.c: Fix incorrect array boundary check
common/memtest.c: Do not omit offset of 0 from tests
common/memtest.c: Refactor mem_test() into three surbroutines
common/memtest.c: Distil common error reporting code
serial: i.MX: Write settings to a correct register
Antony Pavlov (10):
net: dm9k: show only one phy on miibus
net: dm9k: add device tree support
net: dm9k: fix reset routine
MIPS: img-ci20: enable dm9000 ethernet controller
MIPS: img-ci20_defconfig: enable network stuff
MIPS: bcm47xx: use PUTC_LL() from common debug_ll_ns16550.h header
update dlink-dir-320_defconfig
MIPS: asm/debug_ll_ns16550.h: use plain inline instead of __inline__
PPC: asm/bitops.h: drop unused ext2* and minix* stuff
.mailmap: add more Juergen Borleis' e-mail addresses
Fabio Estevam (1):
mx53-qsb: Fix boot hang during reboot stress test
Hubert Feurstein (1):
login: fix broken login command
Jan Luebbe (2):
state: add some more error messages
state: add support for uint8 variables
Juergen Borleis (1):
Documentation: fix typo
Lucas Stach (2):
PCI: rework BAR size calculation
PCI: remove bogus host bridge setup skipping
Marc Kleine-Budde (26):
state: documentation: add anchor so that state can be referenced later
state: state_uint32_create: use %u to print unsigned variable
state: state_new_from_fdt(): remove unused function
fdt: of_unflatten_dtb(): remove left over "root" argument from inline doc
watchdog: add static inline no-ops if WD is disabled
state: print name of property of size mismatch is detected
state: print proper error message, if reg property is not found
state: make state_release() non static
state: add functionality to export state description
state: backend: support phandle and of_path references
crypto: digest: mark signature argument as const
state: add fixup to copy state from barebox to kernel device tree
habv4: habv4_get_status(): fix warning with no-op static inline function
arm/crypto: add generated sha256-core.S to gitignore
state: mtd_get_meminfo: open path readonly instead of readwrite
state: mtd_get_meminfo: make usage of mtd's meminfo compatible to linux
state: backend_raw: remove hard coded limit of two copies
state: backend_raw: rename struct state_backend_raw::step -> stride
state: backend_raw: properly align write and erase size
state: backend_raw: factor out state_backend_raw_file_get_size() into separate function
state: backend_raw: rename backend_raw_write_one() -> backend_raw_save_one()
state: backend_raw: add sanity check of data_len during load
state: backend_raw: update documentation of struct state_backend_raw members
state: Documentation: add newly implemented "uint8" types.
state: Documentation: the backend properties are not optional (anymore)
state: Documentation: fix dts code example
Markus Pargmann (1):
imx6: lowlevel_init: Fix workaround for new i.MX6s chips
Masahiro Yamada (1):
Abolish cpu_read* and cpu_write* accessors
Renaud Barbier (1):
memtest: skip memory region smaller than one page
Robert Schwebel (1):
Documentation: booting linux: improve doc text
Sascha Hauer (70):
mci: imx-esdhc: Use IS_ENABLED() instead of #ifdef
mci: imx-esdhc: Check for errors in esdhc_pio_read_write
mci: imx-esdhc: Replace printf with dev_*
dts: update to v4.1-rc3
startup: introduce postenvironment_initcall
console: use regular malloc for log messages
xfuncs: remove debugging output
i2c: Use correct format specifier
mem: Fix memcpy_sz variable types
mtd: Fix function prototype
mtd: nand: Fix format specifier
dma: Use generic place for dma_addr_t typedef
drop __BITS_PER_LONG
tlsf malloc: enable 64bit support on 64bit architectures
memory_display: Use consistent types
memory_display: Add 64bit support
fs: Add O_RWSIZE_8
mem commands: suppport parsing 'q' option
md command: Add 64bit support
memcmp command: Add 64bit support
memcpy command: Add 64bit support
memset command: Add 64bit support
mm command: Add 64bit support
mw command: Add 64bit support
introduce bitsperlong.h for remaining architectures
introduce generic posix_types.h
remove unused nlink_t
ARM: use generic posix_types.h
blackfin: use generic posix_types.h
x86: use generic posix_types.h
openrisc: use generic posix_types.h
mips: use generic posix_types.h
ppc: use generic posix_types.h
sandbox: use generic posix_types.h
efi: use generic posix_types.h
nios2: use generic posix_types.h
crc16: Make buffer argument const
console: Add functions to get/set active state of console
console: Add functions to get/set baudrate
console: Add console_get_by_name
console: When switching baudrate print console name
usb: gadget: serial: Use console_set_active to activate console
loadxy: Use console_get_by_name
loadxy: use console_get_baudrate
loadx: ignore -c option
loadxy: use console_set_baudrate
loadb: use console_get_baudrate
loadb: Use console_set_baudrate
loadb: ignore -c option
Merge branch 'for-next/am33xx'
Merge branch 'for-next/console'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/mci'
Merge branch 'for-next/mem64'
Merge branch 'for-next/memtest'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/posix_types'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/spi-nor'
Merge branch 'for-next/state'
clk: of: fix clk_of_table generation
scripts: Add mxs-usb-loader to .gitignore
Documentation: imx: Fix underline length
devinfo: fix return value
bmp support: Use unaligned accessors
mtd: m25p80: Fix Kconfig dependencies
ARM: start: Fix code reordering problem
Release v2015.07.0
Steffen Trumtrar (10):
scripts: update socfpga_sequencer importer to Quartus 15.0
ARM: socfpga: update sdram calibration to 15.0
mtd: spi-nor: add SPI-NOR framework
mtd: spi-nor: add cadence quadspi driver
ARM: dts: socfpga: add qspi node
ARM: socfpga: socdk add qspi flash
ARM: socfpga: socrates: add qspi flash
ARM: socfpga: sockit: add qspi flash
ARM: socfpga: xload: support qspi bootsource
mtd: m25p80: use the SPI nor framework
Uwe Kleine-König (1):
of: add a function to remove an of_fixup
Wadim Egorov (6):
ARM: dts: Add an am33xx include file for MLO size reduction
ARM: dts: Add am33xx-strip.dtsi to PHYTEC MLOs
bootsource: Add NET bootsource
net: dhcp: Split dhcp funcionality & add dhcp command
ARM: am33xx: Add network boot
scripts/omap_signGP: Fix image size in GP header
.mailmap | 5 +
Documentation/boards/imx.rst | 27 +
Documentation/boards/socfpga.rst | 56 +-
.../devicetree/bindings/barebox/barebox,state.rst | 23 +-
Documentation/user/booting-linux.rst | 13 +-
Documentation/user/usb.rst | 2 +-
Makefile | 4 +-
arch/arm/boards/eltec-hipercam/lowlevel.c | 18 +-
arch/arm/boards/embest-riotboard/lowlevel.c | 16 +-
arch/arm/boards/freescale-mx51-babbage/Makefile | 3 +
arch/arm/boards/freescale-mx51-babbage/board.c | 60 +
.../flash-header-common.imxcfg | 58 +
.../flash-header-imx51-babbage-xload.imxcfg | 3 +
.../flash-header-imx51-babbage.imxcfg | 60 +-
arch/arm/boards/freescale-mx51-babbage/lowlevel.c | 61 +
.../flash-header-imx53-loco.imxcfg | 3 +-
.../arm/boards/freescale-mx6sx-sabresdb/lowlevel.c | 20 +-
arch/arm/boards/guf-santaro/lowlevel.c | 19 +-
arch/arm/boards/karo-tx6x/lowlevel.c | 21 +-
arch/arm/boards/phytec-phycard-imx6/lowlevel.c | 21 +-
arch/arm/boards/phytec-phyflex-imx6/lowlevel.c | 21 +-
arch/arm/boards/tqma6x/lowlevel.c | 18 +-
arch/arm/boards/variscite-mx6/lowlevel.c | 21 +-
arch/arm/configs/imx_v7-xload_defconfig | 52 +
arch/arm/cpu/start.c | 2 +
arch/arm/crypto/.gitignore | 1 +
arch/arm/dts/am335x-phytec-phycard-som-mlo.dts | 1 +
arch/arm/dts/am335x-phytec-phycore-som-mlo.dts | 1 +
arch/arm/dts/am335x-phytec-phyflex-som-mlo.dts | 1 +
arch/arm/dts/am33xx-strip.dtsi | 48 +
arch/arm/dts/socfpga.dtsi | 14 +
arch/arm/dts/socfpga_cyclone5_socdk.dts | 20 +
arch/arm/dts/socfpga_cyclone5_sockit.dts | 20 +
arch/arm/dts/socfpga_cyclone5_socrates.dts | 20 +
arch/arm/include/asm/bitsperlong.h | 1 +
arch/arm/include/asm/posix_types.h | 79 +-
arch/arm/include/asm/types.h | 7 +-
arch/arm/mach-imx/Kconfig | 15 +
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/imx6.c | 48 +-
arch/arm/mach-imx/include/mach/clock-imx51_53.h | 5 +-
arch/arm/mach-imx/include/mach/debug_ll.h | 77 +-
arch/arm/mach-imx/xload.c | 52 +
arch/arm/mach-omap/Kconfig | 9 +
arch/arm/mach-omap/am33xx_generic.c | 3 +
arch/arm/mach-omap/xload.c | 51 +
arch/arm/mach-socfpga/include/mach/generic.h | 5 +
arch/arm/mach-socfpga/include/mach/sequencer.c | 293 +----
arch/arm/mach-socfpga/include/mach/sequencer.h | 2 +
arch/arm/mach-socfpga/include/mach/socfpga-regs.h | 2 +
arch/arm/mach-socfpga/xload.c | 58 +-
arch/arm/mach-tegra/include/mach/lowlevel.h | 4 +-
arch/arm/pbl/Makefile | 2 +-
arch/blackfin/include/asm/posix_types.h | 86 +-
arch/blackfin/include/asm/types.h | 6 +-
arch/efi/include/asm/bitsperlong.h | 10 +
arch/efi/include/asm/posix_types.h | 94 +-
arch/efi/include/asm/types.h | 10 +-
arch/mips/Kconfig | 1 +
arch/mips/configs/dlink-dir-320_defconfig | 3 +-
arch/mips/configs/img-ci20_defconfig | 11 +-
arch/mips/dts/img-ci20.dts | 15 +
arch/mips/include/asm/bitsperlong.h | 4 +-
arch/mips/include/asm/debug_ll_ns16550.h | 2 +-
arch/mips/include/asm/posix_types.h | 130 +--
arch/mips/include/asm/types.h | 12 -
arch/mips/mach-ath79/include/mach/debug_ll.h | 4 +-
arch/mips/mach-bcm47xx/include/mach/debug_ll.h | 14 +-
arch/mips/mach-xburst/Kconfig | 1 +
arch/mips/pbl/Makefile | 2 +-
arch/nios2/include/asm/posix_types.h | 78 +-
arch/nios2/include/asm/types.h | 3 -
arch/openrisc/include/asm/bitsperlong.h | 1 +
arch/openrisc/include/asm/posix_types.h | 72 +-
arch/openrisc/include/asm/types.h | 6 +-
arch/ppc/include/asm/bitops.h | 63 -
arch/ppc/include/asm/bitsperlong.h | 1 +
arch/ppc/include/asm/posix_types.h | 109 +-
arch/ppc/include/asm/types.h | 5 +-
arch/sandbox/include/asm/bitsperlong.h | 10 +
arch/sandbox/include/asm/posix_types.h | 94 +-
arch/sandbox/include/asm/types.h | 6 +-
arch/x86/include/asm/bitsperlong.h | 1 +
arch/x86/include/asm/posix_types.h | 45 +-
arch/x86/include/asm/types.h | 2 +-
commands/Kconfig | 1 +
commands/Makefile | 1 +
commands/devinfo.c | 7 +-
commands/dhcp.c | 78 ++
commands/loadb.c | 39 +-
commands/loadxy.c | 81 +-
commands/login.c | 2 +-
commands/md.c | 3 +-
commands/mem.c | 3 +
commands/memcmp.c | 3 +-
commands/memcpy.c | 3 +-
commands/memset.c | 3 +-
commands/memtest.c | 12 +-
commands/mm.c | 20 +-
commands/mw.c | 10 +-
commands/ubiformat.c | 2 +-
common/Kconfig | 3 +
common/bootsource.c | 1 +
common/console.c | 126 +-
common/console_common.c | 27 +-
common/memory_display.c | 42 +-
common/memtest.c | 176 +--
common/oftree.c | 19 +
common/startup.c | 28 +-
common/state.c | 402 +++++--
common/tlsfbits.h | 6 +-
crypto/crc16.c | 2 +-
crypto/digest.c | 10 +-
drivers/i2c/i2c.c | 2 +-
drivers/mci/imx-esdhc.c | 141 ++-
drivers/misc/state.c | 72 +-
drivers/mtd/Kconfig | 1 +
drivers/mtd/Makefile | 1 +
drivers/mtd/core.c | 2 +-
drivers/mtd/devices/Kconfig | 1 +
drivers/mtd/devices/m25p80.c | 999 +++-------------
drivers/mtd/nand/nand-bb.c | 4 +-
drivers/mtd/nor/cfi_flash.h | 12 +-
drivers/mtd/spi-nor/Kconfig | 15 +
drivers/mtd/spi-nor/Makefile | 2 +
drivers/mtd/spi-nor/cadence-quadspi.c | 1211 ++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 1148 +++++++++++++++++++
drivers/net/dm9k.c | 138 ++-
drivers/of/fdt.c | 1 -
drivers/pci/pci.c | 44 +-
drivers/serial/serial_ar933x.c | 4 +-
drivers/serial/serial_imx.c | 116 +-
drivers/spi/ath79_spi.c | 4 +-
drivers/usb/gadget/u_serial.c | 3 +-
dts/Bindings/arm/omap/l3-noc.txt | 1 +
dts/Bindings/dma/fsl-mxs-dma.txt | 2 +-
dts/Bindings/rtc/abracon,abx80x.txt | 30 +
dts/src/arm/am437x-sk-evm.dts | 4 +-
dts/src/arm/am57xx-beagle-x15.dts | 11 +-
dts/src/arm/armada-xp-openblocks-ax3-4.dts | 4 +
dts/src/arm/dra7.dtsi | 10 +-
dts/src/arm/exynos4412-odroid-common.dtsi | 3 +
dts/src/arm/exynos5250-snow.dts | 1 +
dts/src/arm/exynos5420-trip-points.dtsi | 2 +-
dts/src/arm/exynos5420.dtsi | 1 +
dts/src/arm/exynos5440-trip-points.dtsi | 2 +-
dts/src/arm/imx23-olinuxino.dts | 4 +-
dts/src/arm/imx25.dtsi | 1 +
dts/src/arm/imx28.dtsi | 2 +-
dts/src/arm/imx6qdl-phytec-pfla02.dtsi | 2 +
dts/src/arm/imx6qdl-sabreauto.dtsi | 1 -
dts/src/arm/omap3-n900.dts | 4 +
dts/src/arm/omap3.dtsi | 2 +
dts/src/arm/omap5.dtsi | 2 +-
dts/src/arm/r8a7791-koelsch.dts | 2 +-
dts/src/arm/ste-dbx5x0.dtsi | 17 -
dts/src/arm/ste-href.dtsi | 15 +
dts/src/arm/ste-snowball.dts | 13 +
fs/fs.c | 16 +-
images/Makefile.imx | 20 +-
include/asm-generic/barebox.lds.h | 7 +-
include/asm-generic/bitsperlong.h | 22 -
include/asm-generic/posix_types.h | 90 ++
include/asm-generic/swab.h | 2 +-
include/bootsource.h | 1 +
include/console.h | 8 +
include/crc.h | 2 +-
include/dhcp.h | 25 +
include/digest.h | 10 +-
include/fcntl.h | 3 +-
include/habv4.h | 2 +-
include/init.h | 2 +
include/io.h | 8 -
include/linux/clk.h | 2 +-
include/linux/mod_devicetable.h | 7 +
include/linux/mtd/spi-nor.h | 204 ++++
include/linux/types.h | 8 +-
include/of.h | 1 +
include/platform_data/cadence_qspi.h | 9 +
include/serial/imx-uart.h | 128 +++
include/state.h | 9 +-
include/watchdog.h | 17 +
lib/bootstrap/devfs.c | 59 +-
lib/gui/bmp.c | 11 +-
lib/xfuncs.c | 4 -
net/Kconfig | 4 +
net/Makefile | 2 +-
net/dhcp.c | 165 ++-
scripts/.gitignore | 1 +
scripts/Makefile.lib | 6 +-
scripts/coccinelle/misc/altera_sequencer.cocci | 3 +-
scripts/imx/Makefile | 2 +
scripts/imx/imx-image.c | 11 +-
scripts/omap_signGP.c | 7 +
scripts/socfpga_get_sequencer | 8 +
scripts/socfpga_sequencer_defines_defaults | 4 +
196 files changed, 5358 insertions(+), 3047 deletions(-)
create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-common.imxcfg
create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg
create mode 100644 arch/arm/configs/imx_v7-xload_defconfig
create mode 100644 arch/arm/crypto/.gitignore
create mode 100644 arch/arm/dts/am33xx-strip.dtsi
create mode 100644 arch/arm/include/asm/bitsperlong.h
create mode 100644 arch/arm/mach-imx/xload.c
create mode 100644 arch/efi/include/asm/bitsperlong.h
create mode 100644 arch/openrisc/include/asm/bitsperlong.h
create mode 100644 arch/ppc/include/asm/bitsperlong.h
create mode 100644 arch/sandbox/include/asm/bitsperlong.h
create mode 100644 arch/x86/include/asm/bitsperlong.h
create mode 100644 commands/dhcp.c
create mode 100644 drivers/mtd/spi-nor/Kconfig
create mode 100644 drivers/mtd/spi-nor/Makefile
create mode 100644 drivers/mtd/spi-nor/cadence-quadspi.c
create mode 100644 drivers/mtd/spi-nor/spi-nor.c
create mode 100644 dts/Bindings/rtc/abracon,abx80x.txt
create mode 100644 include/asm-generic/posix_types.h
create mode 100644 include/dhcp.h
create mode 100644 include/linux/mtd/spi-nor.h
create mode 100644 include/platform_data/cadence_qspi.h
create mode 100644 include/serial/imx-uart.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2015-07-03 4:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150703044620.GE18700@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox