mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Peter Mamonov <pmamonov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
Date: Tue, 13 Oct 2015 04:04:28 +0200	[thread overview]
Message-ID: <20151013020428.GB8288@ns203013.ovh.net> (raw)
In-Reply-To: <20151007195221.7aaea4c6@berta>

On 19:52 Wed 07 Oct     , Peter Mamonov wrote:
> On Wed, 7 Oct 2015 17:40:24 +0200
> Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote:
> 
> > On 17:40 Wed 07 Oct     , Peter Mamonov wrote:
> > > On Wed, 7 Oct 2015 15:47:03 +0200
> > > Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote:
> > > 
> > > > On 18:58 Tue 22 Sep     , Peter Mamonov wrote:
> > > > > Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
> > > > > ---
> > > > >  drivers/usb/host/ehci-hcd.c | 6 +++---
> > > > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/usb/host/ehci-hcd.c
> > > > > b/drivers/usb/host/ehci-hcd.c index d6df7b8..03d6150 100644
> > > > > --- a/drivers/usb/host/ehci-hcd.c
> > > > > +++ b/drivers/usb/host/ehci-hcd.c
> > > > > @@ -684,7 +684,7 @@ ehci_submit_root(struct usb_device *dev,
> > > > > unsigned long pipe, void *buffer,
> > > > >  				 * root
> > > > >  				 */
> > > > >  				ehci_powerup_fixup(ehci);
> > > > > -				mdelay(50);
> > > > > +				mdelay_non_interruptible(50);
> > > > >  				ehci->portreset |= 1 << port;
> > > > >  				/* terminate the reset */
> > > > >  				ehci_writel(status_reg, reg &
> > > > > ~EHCI_PS_PR); @@ -747,7 +747,7 @@ ehci_submit_root(struct
> > > > > usb_device *dev, unsigned long pipe, void *buffer, goto unknown;
> > > > >  	}
> > > > >  
> > > > > -	mdelay(1);
> > > > > +	mdelay_non_interruptible(1);
> > > > >  	len = min3(srclen, (int)le16_to_cpu(req->length),
> > > > > length); if (srcptr != NULL && len > 0)
> > > > >  		memcpy(buffer, srcptr, len);
> > > > > @@ -889,7 +889,7 @@ static int ehci_init(struct usb_host *host)
> > > > >  	ehci_writel(&ehci->hcor->or_configflag, cmd);
> > > > >  	/* unblock posted write */
> > > > >  	cmd = ehci_readl(&ehci->hcor->or_usbcmd);
> > > > > -	mdelay(5);
> > > > > +	mdelay_non_interruptible(5);
> > > > why do you need that much non interruptible delau?
> > > 
> > > Non-interruptible delays are needed here to prevent ehci_* functions
> > > re-entrance. The re-entrance occurs during a usb bus scan, after
> > > detection of a usb keyboard. As soon as a USB keyboard is detected,
> > > it's driver starts the poller, which interferes with the process of
> > > usb bus scan. However that last one delay may be interruptible.
> > 
> > my problem is as soon as you start a usb control msg you block
> > everything
> > 
> > nothing else can run in barebox
> > 
> > can slow down barebox boot
> > 
> > I do think we need a real mdelay_non_interruptible feature but just
> > forbidden to recall usb control msg.
> > But the rest of barebox can run durring those 5ms
> 
> Well, I think it can be done by returning -EAGAIN on re-entrance
> detection in ehci_* functions [1], and skipping the poll in the keyboard
> driver.
> 
> By the way, could you clarify: do you really experience
> considerable barebox slowdown or you make an assumtion based on the
> code analysis?

I've wrote similar code for barebox nearly 1 year ago and did notice it

Best Regards,
J.
> 
> [1]
> http://lists.infradead.org/pipermail/barebox/2015-September/024715.html
> 
> Regards,
> Peter
> 
> > 
> > Best Regards,
> > J.
> 

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2015-10-13  2:04 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-22 15:58 [PATCH v6 0/5] input: add usb keyboard driver Peter Mamonov
2015-09-22 15:58 ` [PATCH 1/5] common: clock: introduce mdelay_non_interruptible() Peter Mamonov
2015-09-22 21:15   ` Antony Pavlov
2015-09-22 21:20     ` Peter Mamonov
2015-09-22 15:58 ` [PATCH 2/5] usb: ehci-hcd: port periodic transactions implementation from the u-boot Peter Mamonov
2015-09-22 15:58 ` [PATCH 3/5] usb: ehci-hcd: detect re-entrance Peter Mamonov
2015-09-23 14:23   ` Sascha Hauer
2015-09-22 15:58 ` [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible() Peter Mamonov
2015-10-07 13:47   ` Jean-Christophe PLAGNIOL-VILLARD
2015-10-07 14:40     ` Peter Mamonov
2015-10-07 15:40       ` Jean-Christophe PLAGNIOL-VILLARD
2015-10-07 16:52         ` Peter Mamonov
2015-10-12  7:00           ` Sascha Hauer
2015-10-12 11:43             ` Peter Mamonov
2015-10-12 13:44               ` Sascha Hauer
2015-10-13 10:37                 ` Peter Mamonov
2015-10-13 10:38                   ` Sascha Hauer
2015-10-13  2:04           ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2015-10-13  9:11             ` Antony Pavlov
2015-09-22 15:58 ` [PATCH 5/5] input: port usb keyboard driver from the u-boot Peter Mamonov
2015-09-23 14:34 ` [PATCH 1/2] fixup! usb: ehci-hcd: port periodic transactions implementation " Sascha Hauer
2015-09-23 14:34   ` [PATCH 2/2] fixup! input: port usb keyboard driver " Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2015-09-21 11:30 [RFC v5 0/2] WIP: add usb keyboard driver Peter Mamonov
2015-09-21 11:30 ` [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible() Peter Mamonov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151013020428.GB8288@ns203013.ovh.net \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=pmamonov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox