mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Trent Piepho <tpiepho@kymetacorp.com>
Cc: barebox <barebox@lists.infradead.org>
Subject: Re: [PATCH] omap socfpga: Switch in flash env loading to use different config
Date: Thu, 5 Nov 2015 09:03:34 +0100	[thread overview]
Message-ID: <20151105080334.GD8526@pengutronix.de> (raw)
In-Reply-To: <1446671421.4553.5.camel@rtred1test09.kymeta.local>

On Wed, Nov 04, 2015 at 09:10:20PM +0000, Trent Piepho wrote:
> On these systems, the base arch has code to load the in flash
> environment from a file located in a FAT filesystem.  This was
> controlled by the config option DEFAULT_ENVIRONMENT.  However, that
> option turns on compiling the env into the barebox binary itself, as a
> backup if the in flash env can't be loaded.
> 
> Most other boards have in flash env support unconditionally.  But omap
> and socfpga also have xloader configurations, which aren't supposed to
> have environment support, either in flash or compiled in.  If the in
> flash env code were unconditional, then the xloaders would gain it.
> 
> So the code depends on ENV_HANDLING, which is only set on those boards
> that are supposed to have an in flash env and not set on all the
> boards that aren't supposed to have it.
> 
> If someone wanted to create a board that did have a saved env, but
> used an alternate to this generic omap/socfpga file in FAT method,
> then they'd probably want to create a new config option to control
> this code and have it not be enabled for their board.
> 
> Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>

Applied, thanks

Sascha

> ---
> 
> I tested all existing OMAP defconfigs, and omap_env_init's presence or
> absence is unchanged after this patch.
> 
>  arch/arm/mach-omap/omap_generic.c | 10 ++++++----
>  arch/arm/mach-socfpga/generic.c   | 10 ++++++----
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/mach-omap/omap_generic.c b/arch/arm/mach-omap/omap_generic.c
> index 165487c..071a1bf 100644
> --- a/arch/arm/mach-omap/omap_generic.c
> +++ b/arch/arm/mach-omap/omap_generic.c
> @@ -107,7 +107,8 @@ const char *omap_get_bootmmc_devname(void)
>  	return omap_bootmmc_dev;
>  }
>  
> -#if defined(CONFIG_DEFAULT_ENVIRONMENT)
> +#if defined(CONFIG_ENV_HANDLING)
> +#define ENV_PATH "/boot/barebox.env"
>  static int omap_env_init(void)
>  {
>  	struct stat s;
> @@ -132,18 +133,19 @@ static int omap_env_init(void)
>  	free(partname);
>  
>  	if (ret) {
> -		printf("no %s. using default env\n", diskdev);
> +		pr_err("Failed to load environment: no device '%s'\n", diskdev);
>  		return 0;
>  	}
>  
>  	mkdir("/boot", 0666);
>  	ret = mount(diskdev, "fat", "/boot", NULL);
>  	if (ret) {
> -		printf("failed to mount %s\n", diskdev);
> +		pr_err("Failed to load environment: mount %s failed (%d)\n", diskdev, ret);
>  		return 0;
>  	}
>  
> -	default_environment_path_set("/boot/barebox.env");
> +	pr_debug("Loading default env from %s on device %s\n", ENV_PATH, diskdev);
> +	default_environment_path_set(ENV_PATH);
>  
>  	return 0;
>  }
> diff --git a/arch/arm/mach-socfpga/generic.c b/arch/arm/mach-socfpga/generic.c
> index 6259354..234dc52 100644
> --- a/arch/arm/mach-socfpga/generic.c
> +++ b/arch/arm/mach-socfpga/generic.c
> @@ -76,7 +76,8 @@ static int socfpga_init(void)
>  }
>  core_initcall(socfpga_init);
>  
> -#if defined(CONFIG_DEFAULT_ENVIRONMENT)
> +#if defined(CONFIG_ENV_HANDLING)
> +#define ENV_PATH "/boot/barebox.env"
>  static int socfpga_env_init(void)
>  {
>  	struct stat s;
> @@ -92,18 +93,19 @@ static int socfpga_env_init(void)
>  	ret = stat(partname, &s);
>  
>  	if (ret) {
> -		printf("no %s. using default env\n", diskdev);
> +		pr_err("Failed to load environment: no device '%s'\n", diskdev);
>  		goto out_free;
>  	}
>  
>  	mkdir("/boot", 0666);
>  	ret = mount(partname, "fat", "/boot", NULL);
>  	if (ret) {
> -		printf("failed to mount %s\n", diskdev);
> +		pr_err("Failed to load environment: mount %s failed (%d)\n", partname, ret);
>  		goto out_free;
>  	}
>  
> -	default_environment_path_set("/boot/barebox.env");
> +	pr_debug("Loading default env from %s on device %s\n", ENV_PATH, diskdev);
> +	default_environment_path_set(ENV_PATH);
>  
>  out_free:
>  	free(partname);
> -- 
> 1.8.3.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2015-11-05  8:03 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-04 21:10 Trent Piepho
2015-11-05  8:03 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151105080334.GD8526@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=tpiepho@kymetacorp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox