From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1aIaK1-000299-0m for barebox@lists.infradead.org; Mon, 11 Jan 2016 11:07:38 +0000 Received: from ptx.hi.pengutronix.de ([2001:67c:670:100:1d::c0] ident=Debian-exim) by metis.ext.pengutronix.de with esmtps (TLS1.2:RSA_AES_128_CBC_SHA1:128) (Exim 4.80) (envelope-from ) id 1aIaJf-0006ke-BK for barebox@lists.infradead.org; Mon, 11 Jan 2016 12:07:15 +0100 Received: from sha by ptx.hi.pengutronix.de with local (Exim 4.84) (envelope-from ) id 1aIaJf-0007V3-4Q for barebox@lists.infradead.org; Mon, 11 Jan 2016 12:07:15 +0100 Date: Mon, 11 Jan 2016 12:07:15 +0100 From: Sascha Hauer Message-ID: <20160111110715.GQ13058@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: v2016.01.0 To: Barebox List I just pushed out the first 2016 release: v2016.01.0 See below for a list of patches that went into this release. Sascha ---------------------------------------------------------------- Aleksey Kuleshov (1): MIPS: import optimized string functions from Linux Alexander Aring (1): memtest: fix missing arguments in help string Andrey Smirnov (6): i2c: Add support for DesignWare controllers i2c-imx: Use xzalloc instead of kzalloc imx: ocotp: Add code to initialize 'cdev->device_node' drivers: bus: Match against id_table first drivers: bus: Match against id_table first i2c: Port two utility functions from Linux kernel Antony Pavlov (13): MIPS: traps.c: separate registers print stuff to show_regs() MIPS: avoid excessive exception MIPS: import exception registers restoring macros from linux kernel MIPS: allow user to pass incorrect address to md command MIPS: black-swift: skip pbl lowlevel init if running from RAM MIPS: tplink-mr3020: skip pbl lowlevel init if running from RAM i2c: import multiplexed I2C bus core support from linux kernel i2c: add pca954x bus multiplexer driver net: usb: asix: make rx_fixup ax_skb buffer aligned net: usb: asix: fix 'no previous prototype' warning environment: support env on at24 eeprom net: tap: make locally used functions static net: tap: fix whitespaces Christian Hemp (3): ARM: phytec-som-imx6: update environment ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM Du Huanpeng (4): lib: fix coding style fbconsole: move font variable into struct font_desc lib: readline support ctrl-l to clear screen font: fbconsole: add custom font supports Enrico Jorns (1): state: disable load command Florian Vallee (3): imx35: register usb-misc by default eukrea-cpuimx35: setup usb through chipidea-imx driver eukrea-cpuimx35: update defconfig Jan Remmet (3): bootm: cleanup bootm_open_oftree bootm: get file type before bootm_open_os_uimage state: make type check error verbose Lucas Stach (14): ARM: imx6: add MMDC arbitration control register define ARM: microsom: delete cargo-cult from Makefile ARM: microsom: change barebox image name for Hummingboard ARM: microsom: import DCD from SolidRun U-Boot ARM: microsom: add full set of module variants on Hummingboard ARM: microsom: make ETH work on production modules ARM: microsom: get MAC address from fuses ARM: ventana: remove unneeded clock init in DCD net: rtl8169: get rid of DMA_ADDRESS_BROKEN ARM: mx6sx-sabresdb: drop unneeded makefile rules ARM: mx6sx-sabresdb: set proper hostname ARM: ccxmx53: properly guard initcall for multiimage MCI: init device_node for MCI mainarea cdev reset: fix non GPIO reset Marc Kleine-Budde (8): of_path: of_find_path() factor out device detection logic into separa= te function of_path: add of_find_path_by_node() state: make use of of_find_path_by_node() and add return -EPROBE_DEFE= R if device is not available state: use name of device node as name if alias is not available crypto: Kconfig: add submenu for crypto related config options crypto: add simple keystore state: prepare raw backend for hmac support state: backend_raw: add hmac support Markus Pargmann (1): defaultenv: boot/net: Boot initramfs from tftp if present Oleksij Rempel (1): MIPS: pbl: add pbl_blt macro Peter Mamonov (1): common: filetype: do not redetect MBR-type devices as a FAT-type Sascha Hauer (33): ARM: omap: Use correct device to mount on /boot graphics_utils: check for valid framebuffer before creating a screen fbconsole: register fonts dynamically ls: fix exitcode loadb: Use local cdev loadb: deactivate console before using it for loadb console: Set baudrate during registration loadb: Allow to specify device to use loads: Use putchar rather than console_putc i2c: Create for_each_i2c_adapter() i2c_probe: Make command easier to work with video: pwm-backlight: Honour discrete brightness levels from dt reset: Allow dummy reset lines reset: Remove unused *_optional functions reset: Add gpio reset support video: i.MX IPUv3: Set ldb clocks correctly spi: i.MX: optimize transfers for ECSPI v2.3 Merge branch 'for-next/arm' Merge branch 'for-next/console' Merge branch 'for-next/fb' Merge branch 'for-next/i2c' Merge branch 'for-next/imx' Merge branch 'for-next/mips' Merge branch 'for-next/misc' Merge branch 'for-next/mmc' Merge branch 'for-next/mtd' Merge branch 'for-next/net' Merge branch 'for-next/omap' Merge branch 'for-next/reset' Merge branch 'for-next/socfpga' Merge branch 'for-next/state' ARM: dts: Add *.dtb.lzo to clean files Release v2016.01.0 Sebastian Hesselbarth (19): of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux mtd: nand: Clarify Marvell Orion Kconfig prompt arm: pxa: Prepare for NAND clkdev lookup on PXA3xx arm: pxa: Add clock for Zylonite NFC mtd: nand_mrvl_nfc: Use common clock for core clock arm: pxa: Remove pxa_get_nandclk() mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00 mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase mtd: nand_mrvl_nfc: Protect mrvl_nand_probe_dt mtd: nand_mrvl_nfc: Fix num-cs property parsing mtd: nand_mrvl_nfc: Get ecc parameters from DT mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC mtd: nand_mrvl_nfc: Add support for 8bit BCH HW ECC mtd: nand_mrvl_nfc: Add support for HW BCH ECC mtd: nand_mrvl_nfc: Add support for NDCB3 register mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U Sergey Koshechkin (4): mk-omap-image: make some locally used functions static docproc: drop unused utility crypto: crc32: fix warnings: no previous prototype for 'crc32', 'crc3= 2_no_comp', 'file_crc' make_directory: fix warning: no previous prototype Stefan Christ (11): ARM: imx6: phycard: use numeric suffix in device tree boards: Add phytec-som-imx6 ARM: phytec-som-imx6: set loadaddr to start of DDR memory. ARM: pfla02: append suffix 1bank ARM: imx6q: pfla02: Add support for 512MiB RAM on one bank ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAM ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bank net: fec: set phy reset time to 1ms net: fec: implement dtb property phy-reset-duration net: fec: fix indentation and whitspaces wdog: imx-wd: watchdog cannot be disabled again Teresa Remmet (1): driver: watchdog: Add support for omap_wdt Trent Piepho (13): firmware: socfpga: Add parameter "programmed" to fpgamgr driver socfpga: Initialize emac physels to RGMII correctly net: designware: Don't hang in reset with powered down phy mci: core: bus-width property should override driver default mci: dw_mmc: socfpga: Supply bus-width in platform_data mci: dw_mmc: Delete devname in platform_data mci: dw_mmc: Add support for high speed modes i2c: core: Add client I2C address to devinfo eeprom: Add support for 24c1025 EEPROM eeprom: Support pagesize OF device tree property ARM: Remove kernel booting call for thumb2 mode ARM: Remove do_execute and thumb2_execute of_path: Fix bug with partitions, simply code Uwe Kleine-K=F6nig (1): ARM: don't let the unwinder depend on exception handling Wjatscheslaw Stoljarski (1): readline: Kconfig: fix typo Yegor Yefremov (1): driver: make all dev_request_mem_region_* routines MIPS compatible Zahari Doychev (1): environment: allow saving of symbolic link changes = -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox