From: Stefan Christ <s.christ@phytec.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 4/4] ARM: i.MX ocotp: Switch to regmap support
Date: Thu, 4 Feb 2016 08:38:30 +0100 [thread overview]
Message-ID: <20160204073830.GA2447@lws-christ> (raw)
In-Reply-To: <1454516411-22858-5-git-send-email-s.hauer@pengutronix.de>
Hi Sascha,
> + priv->map = regmap_init(dev, &imx_ocotp_regmap_bus, priv, &imx_ocotp_regmap_config);
> + if (IS_ERR(priv->map))
> + return PTR_ERR(priv->map);
> +
> + ret = regmap_register_cdev(priv->map, "imx-ocotp");
> + if (ret)
> + return ret;
> +
Here are whitespaces instead of tabs.
Mit freundlichen Grüßen / Kind regards,
Stefan Christ
On Wed, Feb 03, 2016 at 05:20:11PM +0100, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/mach-imx/ocotp.c | 146 ++++++++++++++++++----------------------------
> 1 file changed, 57 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm/mach-imx/ocotp.c b/arch/arm/mach-imx/ocotp.c
> index c99a003..c6c341d 100644
> --- a/arch/arm/mach-imx/ocotp.c
> +++ b/arch/arm/mach-imx/ocotp.c
> @@ -26,6 +26,7 @@
> #include <io.h>
> #include <of.h>
> #include <clock.h>
> +#include <regmap.h>
> #include <linux/clk.h>
>
> /*
> @@ -71,7 +72,7 @@
> #define MAC_BYTES 8
>
> struct ocotp_priv {
> - struct cdev cdev;
> + struct regmap *map;
> void __iomem *base;
> struct clk *clk;
> struct device_d dev;
> @@ -159,53 +160,42 @@ int imx6_ocotp_read_one_u32(u32 index, u32 *pdata, struct ocotp_priv *priv)
>
> ret = imx6_ocotp_prepare(priv);
> if (ret) {
> - dev_err(priv->cdev.dev, "failed to prepare read fuse 0x%08x\n",
> + dev_err(&priv->dev, "failed to prepare read fuse 0x%08x\n",
> index);
> return ret;
> }
>
> ret = fuse_read_addr(index, pdata, priv);
> if (ret) {
> - dev_err(priv->cdev.dev, "failed to read fuse 0x%08x\n", index);
> + dev_err(&priv->dev, "failed to read fuse 0x%08x\n", index);
> return ret;
> }
>
> if (readl(priv->base) & OCOTP_CTRL_ERROR) {
> - dev_err(priv->cdev.dev, "bad read status at fuse 0x%08x\n", index);
> + dev_err(&priv->dev, "bad read status at fuse 0x%08x\n", index);
> return -EFAULT;
> }
>
> return 0;
> }
>
> -static ssize_t imx6_ocotp_cdev_read(struct cdev *cdev, void *buf,
> - size_t count, loff_t offset, unsigned long flags)
> +static int imx_ocotp_reg_read(void *ctx, unsigned int reg, unsigned int *val)
> {
> + struct ocotp_priv *priv = ctx;
> u32 index;
> - ssize_t read_count = 0;
> - int ret, i;
> - struct ocotp_priv *priv = container_of(cdev, struct ocotp_priv, cdev);
> -
> - index = offset >> 2;
> - count >>= 2;
> -
> - if (count > (FUSE_REGS_COUNT - index))
> - count = FUSE_REGS_COUNT - index - 1;
> -
> - for (i = index; i < (index + count); i++) {
> - if (priv->sense_enable) {
> - ret = imx6_ocotp_read_one_u32(i, buf, priv);
> - if (ret)
> - return ret;
> - } else {
> - *(u32 *)buf = readl(priv->base + 0x400 + i * 0x10);
> - }
> + int ret;
>
> - buf += 4;
> - read_count++;
> + index = reg >> 2;
> +
> + if (priv->sense_enable) {
> + ret = imx6_ocotp_read_one_u32(index, val, priv);
> + if (ret)
> + return ret;
> + } else {
> + *(u32 *)val = readl(priv->base + 0x400 + index * 0x10);
> }
>
> - return read_count << 2;
> + return 0;
> }
>
> static int fuse_blow_addr(u32 addr, u32 value, struct ocotp_priv *priv)
> @@ -232,7 +222,7 @@ static int fuse_blow_addr(u32 addr, u32 value, struct ocotp_priv *priv)
>
> static int imx6_ocotp_reload_shadow(struct ocotp_priv *priv)
> {
> - dev_info(priv->cdev.dev, "reloading shadow registers...\n");
> + dev_info(&priv->dev, "reloading shadow registers...\n");
> writel(OCOTP_CTRL_RELOAD_SHADOWS, priv->base + OCOTP_CTRL_SET);
> udelay(1);
>
> @@ -246,18 +236,18 @@ int imx6_ocotp_blow_one_u32(u32 index, u32 data, u32 *pfused_value,
>
> ret = imx6_ocotp_prepare(priv);
> if (ret) {
> - dev_err(priv->cdev.dev, "prepare to write failed\n");
> + dev_err(&priv->dev, "prepare to write failed\n");
> return ret;
> }
>
> ret = fuse_blow_addr(index, data, priv);
> if (ret) {
> - dev_err(priv->cdev.dev, "fuse blow failed\n");
> + dev_err(&priv->dev, "fuse blow failed\n");
> return ret;
> }
>
> if (readl(priv->base) & OCOTP_CTRL_ERROR) {
> - dev_err(priv->cdev.dev, "bad write status\n");
> + dev_err(&priv->dev, "bad write status\n");
> return -EFAULT;
> }
>
> @@ -266,60 +256,29 @@ int imx6_ocotp_blow_one_u32(u32 index, u32 data, u32 *pfused_value,
> return ret;
> }
>
> -static ssize_t imx6_ocotp_cdev_write(struct cdev *cdev, const void *buf,
> - size_t count, loff_t offset, unsigned long flags)
> +static int imx_ocotp_reg_write(void *ctx, unsigned int reg, unsigned int val)
> {
> - struct ocotp_priv *priv = cdev->priv;
> - int index, i;
> - ssize_t write_count = 0;
> - const u32 *data;
> + struct ocotp_priv *priv = ctx;
> + int index;
> u32 pfuse;
> int ret;
>
> - /* We could do better, but currently this is what's implemented */
> - if (offset & 0x3 || count & 0x3) {
> - dev_err(cdev->dev, "only u32 aligned writes allowed\n");
> - return -EINVAL;
> - }
> -
> - index = offset >> 2;
> - count >>= 2;
> -
> - if (count > (FUSE_REGS_COUNT - index))
> - count = FUSE_REGS_COUNT - index - 1;
> + index = reg >> 2;
>
> - data = buf;
> -
> - for (i = index; i < (index + count); i++) {
> - if (priv->permanent_write_enable) {
> - ret = imx6_ocotp_blow_one_u32(i, *data,
> - &pfuse, priv);
> - if (ret < 0) {
> - goto out;
> - }
> - } else {
> - writel(*data, priv->base + 0x400 + i * 0x10);
> - }
> -
> - data++;
> - write_count++;
> + if (priv->permanent_write_enable) {
> + ret = imx6_ocotp_blow_one_u32(index, val, &pfuse, priv);
> + if (ret < 0)
> + return ret;
> + } else {
> + writel(val, priv->base + 0x400 + index * 0x10);
> }
>
> - ret = 0;
> -
> -out:
> if (priv->permanent_write_enable)
> imx6_ocotp_reload_shadow(priv);
>
> - return ret < 0 ? ret : (write_count << 2);
> + return 0;
> }
>
> -static struct file_operations imx6_ocotp_ops = {
> - .read = imx6_ocotp_cdev_read,
> - .write = imx6_ocotp_cdev_write,
> - .lseek = dev_lseek_default,
> -};
> -
> static uint32_t inc_offset(uint32_t offset)
> {
> if ((offset & 0x3) == 0x3)
> @@ -373,9 +332,11 @@ static int imx_ocotp_get_mac(struct param_d *param, void *priv)
> {
> struct ocotp_priv *ocotp_priv = priv;
> char buf[8];
> - int i;
> + int i, ret;
>
> - imx6_ocotp_cdev_read(&ocotp_priv->cdev, buf, MAC_BYTES, MAC_OFFSET, 0);
> + ret = regmap_bulk_read(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
> + if (ret < 0)
> + return ret;
>
> for (i = 0; i < 6; i++)
> ocotp_priv->ethaddr[i] = buf[5 - i];
> @@ -393,18 +354,29 @@ static int imx_ocotp_set_mac(struct param_d *param, void *priv)
> buf[5 - i] = ocotp_priv->ethaddr[i];
> buf[6] = 0; buf[7] = 0;
>
> - ret = imx6_ocotp_cdev_write(&ocotp_priv->cdev, buf, MAC_BYTES, MAC_OFFSET, 0);
> + ret = regmap_bulk_write(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
> if (ret < 0)
> return ret;
>
> return 0;
> }
>
> +static struct regmap_bus imx_ocotp_regmap_bus = {
> + .reg_write = imx_ocotp_reg_write,
> + .reg_read = imx_ocotp_reg_read,
> +};
> +
> +static const struct regmap_config imx_ocotp_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = 0xbc,
> +};
> +
> static int imx_ocotp_probe(struct device_d *dev)
> {
> void __iomem *base;
> struct ocotp_priv *priv;
> - struct cdev *cdev;
> int ret = 0;
>
> base = dev_request_mem_region(dev, 0);
> @@ -420,22 +392,18 @@ static int imx_ocotp_probe(struct device_d *dev)
> if (IS_ERR(priv->clk))
> return PTR_ERR(priv->clk);
>
> - cdev = &priv->cdev;
> - cdev->dev = dev;
> - cdev->ops = &imx6_ocotp_ops;
> - cdev->priv = priv;
> - cdev->size = 192;
> - cdev->name = "imx-ocotp";
> -
> - ret = devfs_create(cdev);
> -
> - if (ret < 0)
> - return ret;
> -
> strcpy(priv->dev.name, "ocotp");
> priv->dev.parent = dev;
> register_device(&priv->dev);
>
> + priv->map = regmap_init(dev, &imx_ocotp_regmap_bus, priv, &imx_ocotp_regmap_config);
> + if (IS_ERR(priv->map))
> + return PTR_ERR(priv->map);
> +
> + ret = regmap_register_cdev(priv->map, "imx-ocotp");
> + if (ret)
> + return ret;
> +
> if (IS_ENABLED(CONFIG_IMX_OCOTP_WRITE)) {
> dev_add_param_bool(&(priv->dev), "permanent_write_enable",
> NULL, NULL, &priv->permanent_write_enable, NULL);
> --
> 2.7.0.rc3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-02-04 7:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 16:20 [PATCH] Add " Sascha Hauer
2016-02-03 16:20 ` [PATCH 1/4] bitops: Fix shift overflow in GENMASK macros Sascha Hauer
2016-02-03 16:20 ` [PATCH 2/4] Add initial regmap support Sascha Hauer
2016-02-03 16:20 ` [PATCH 3/4] mfd: mc13xxx: Switch to " Sascha Hauer
2016-02-03 16:20 ` [PATCH 4/4] ARM: i.MX ocotp: " Sascha Hauer
2016-02-04 7:38 ` Stefan Christ [this message]
2016-02-04 7:43 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160204073830.GA2447@lws-christ \
--to=s.christ@phytec.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox