From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1aYdyL-0000Rg-PQ for barebox@lists.infradead.Org; Wed, 24 Feb 2016 18:15:38 +0000 Date: Wed, 24 Feb 2016 19:15:15 +0100 From: Sascha Hauer Message-ID: <20160224181515.GS3939@pengutronix.de> References: <20160223083236.GA3939@pengutronix.de> <20160224111516.GM3939@pengutronix.de> <20160224124343.GO3939@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Help configuring i.MX6 IPUv3 with a parrallel display To: Philippe Leduc Cc: barebox@lists.infradead.org On Wed, Feb 24, 2016 at 02:46:08PM +0100, Philippe Leduc wrote: > Victory! > > I checked the timings with an oscilloscope by using Linux and > everything except one pin is identical: LCD_ENABLE ^^ ' . It is a GPIO > that let the display in sleep mode to limit consumption. > > Note that splash utility continue to freeze the board. No backtrace? Is it a BMP or a PNG that you are trying to show? > > About the 'driver' that parse the dt to expose the timings, I'll clean > up and let you review it (this time I'll use git to send you the patch > :) ) Looking forward to it. I think it we had the issue with the missing parallel display support before. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox