* [PATCH v2] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location
@ 2016-04-23 23:01 Fabio Estevam
2016-04-25 6:14 ` Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: Fabio Estevam @ 2016-04-23 23:01 UTC (permalink / raw)
To: s.hauer; +Cc: barebox, sam
After doing a 'saveenv' command, it is no longer possible to boot.
The reason for this behaviour is that the 'barebox' partition has currently
a size of 0x80000 (512 kB), which is not sufficient to store the barebox
binary. This causes the 'barebox' and 'barebox-environment' partitions
to overlap.
Fix this problem by increasing the size of the 'barebox' partition and
by placing the 'barebox-environment' right after it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Also adjust the partition size for 'barebox'.
arch/arm/dts/imx6qdl-sabresd.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index 32318cf..690cd41 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -31,11 +31,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xc0000>;
};
- environment_usdhc3: partition@1 {
+ environment_usdhc3: partition@c0000 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xc0000 0x80000>;
};
};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location
2016-04-23 23:01 [PATCH v2] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location Fabio Estevam
@ 2016-04-25 6:14 ` Sascha Hauer
2016-04-25 11:06 ` Fabio Estevam
0 siblings, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2016-04-25 6:14 UTC (permalink / raw)
To: Fabio Estevam; +Cc: barebox, sam
Hi Fabio,
On Sat, Apr 23, 2016 at 08:01:33PM -0300, Fabio Estevam wrote:
> After doing a 'saveenv' command, it is no longer possible to boot.
>
> The reason for this behaviour is that the 'barebox' partition has currently
> a size of 0x80000 (512 kB), which is not sufficient to store the barebox
> binary. This causes the 'barebox' and 'barebox-environment' partitions
> to overlap.
>
> Fix this problem by increasing the size of the 'barebox' partition and
> by placing the 'barebox-environment' right after it.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - Also adjust the partition size for 'barebox'.
Since we have this problem on many i.MX boards I prefer fixing this for
all affected boards, see below.
This should solve the problem for the next few years, but next time we
must find a more clever solution.
Sascha
----------------------------8<-------------------------------------
From 54bddad853f07effbe55065c4864a3921c4b2e1e Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 Apr 2016 08:05:29 +0200
Subject: [PATCH] ARM: i.MX: increase barebox partition sizes
After doing a 'saveenv' command, it is no longer possible to boot.
The reason for this behaviour is that the 'barebox' partition has
currently
a size of 0x80000 (512 kB), which is not sufficient to store the barebox
binary. This causes the 'barebox' and 'barebox-environment' partitions
to overlap.
Fix this problem by increasing the size of the 'barebox' partition and
by placing the 'barebox-environment' right after it.
This patch increases the barebox partition for all i.MX boards to
0xe0000
Reported-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx25-karo-tx25.dts | 4 ++--
arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts | 4 ++--
arch/arm/dts/imx51-babbage.dts | 2 +-
arch/arm/dts/imx51-genesi-efika-sb.dts | 4 ++--
arch/arm/dts/imx53-ccxmx53.dtsi | 4 ++--
arch/arm/dts/imx53-guf-vincell-lt.dts | 4 ++--
arch/arm/dts/imx53-mba53.dts | 2 +-
arch/arm/dts/imx53-qsb-common.dtsi | 2 +-
arch/arm/dts/imx53-voipac-dmm-668.dtsi | 4 ++--
arch/arm/dts/imx6dl-eltec-hipercam.dts | 4 ++--
arch/arm/dts/imx6dl-hummingboard.dts | 4 ++--
arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts | 4 ++--
arch/arm/dts/imx6dl-wandboard.dts | 6 +++---
arch/arm/dts/imx6q-dmo-edmqmx6.dts | 12 ++++++------
arch/arm/dts/imx6q-embedsky-e9.dts | 8 ++++----
arch/arm/dts/imx6q-guf-santaro.dts | 2 +-
arch/arm/dts/imx6q-hummingboard.dts | 4 ++--
arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi | 4 ++--
arch/arm/dts/imx6q-phytec-phycore-som-nand.dts | 4 ++--
arch/arm/dts/imx6q-wandboard.dts | 6 +++---
arch/arm/dts/imx6qdl-nitrogen6x.dtsi | 4 ++--
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 4 ++--
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 4 ++--
arch/arm/dts/imx6qdl-sabrelite.dtsi | 4 ++--
arch/arm/dts/imx6qdl-sabresd.dtsi | 4 ++--
arch/arm/dts/imx6s-riotboard.dts | 2 +-
arch/arm/dts/imx6sx-sdb.dts | 2 +-
27 files changed, 56 insertions(+), 56 deletions(-)
diff --git a/arch/arm/dts/imx25-karo-tx25.dts b/arch/arm/dts/imx25-karo-tx25.dts
index d661463..6e28ac9 100644
--- a/arch/arm/dts/imx25-karo-tx25.dts
+++ b/arch/arm/dts/imx25-karo-tx25.dts
@@ -123,12 +123,12 @@
partition@0 {
label = "boot";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
partition@2 {
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts b/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
index 3ea1b5b..daa1e0f 100644
--- a/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
+++ b/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
@@ -18,12 +18,12 @@
&nfc {
partition@0 {
label = "boot";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
partition@2 {
diff --git a/arch/arm/dts/imx51-babbage.dts b/arch/arm/dts/imx51-babbage.dts
index f8402ca..c7eeb45 100644
--- a/arch/arm/dts/imx51-babbage.dts
+++ b/arch/arm/dts/imx51-babbage.dts
@@ -29,7 +29,7 @@
environment_esdhc1: partition@0 {
label = "barebox-environment";
- reg = <0x80000 0x20000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx51-genesi-efika-sb.dts b/arch/arm/dts/imx51-genesi-efika-sb.dts
index 78cb1b7..8b237b3 100644
--- a/arch/arm/dts/imx51-genesi-efika-sb.dts
+++ b/arch/arm/dts/imx51-genesi-efika-sb.dts
@@ -417,7 +417,7 @@
partition@0 {
label = "barebox-environment";
- reg = <0xc0000 0x40000>;
+ reg = <0xe0000 0x20000>;
};
};
@@ -535,7 +535,7 @@
partition@0 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
};
diff --git a/arch/arm/dts/imx53-ccxmx53.dtsi b/arch/arm/dts/imx53-ccxmx53.dtsi
index 5553c68..da10757 100644
--- a/arch/arm/dts/imx53-ccxmx53.dtsi
+++ b/arch/arm/dts/imx53-ccxmx53.dtsi
@@ -232,12 +232,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
partition@2 {
diff --git a/arch/arm/dts/imx53-guf-vincell-lt.dts b/arch/arm/dts/imx53-guf-vincell-lt.dts
index a577ab2..d004f9f 100644
--- a/arch/arm/dts/imx53-guf-vincell-lt.dts
+++ b/arch/arm/dts/imx53-guf-vincell-lt.dts
@@ -361,12 +361,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
bareboxenv: partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
partition@2 {
diff --git a/arch/arm/dts/imx53-mba53.dts b/arch/arm/dts/imx53-mba53.dts
index c908c61..cca1383 100644
--- a/arch/arm/dts/imx53-mba53.dts
+++ b/arch/arm/dts/imx53-mba53.dts
@@ -30,7 +30,7 @@
partition@0 {
label = "environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx53-qsb-common.dtsi b/arch/arm/dts/imx53-qsb-common.dtsi
index 85e1b8b..5dd1e4e 100644
--- a/arch/arm/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/dts/imx53-qsb-common.dtsi
@@ -45,7 +45,7 @@
bareboxenv: partition@0 {
label = "barebox-environment";
- reg = <0x80000 0x20000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/dts/imx53-voipac-dmm-668.dtsi
index 6f76d28..f7eed8d 100644
--- a/arch/arm/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/dts/imx53-voipac-dmm-668.dtsi
@@ -15,12 +15,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
partition@2 {
diff --git a/arch/arm/dts/imx6dl-eltec-hipercam.dts b/arch/arm/dts/imx6dl-eltec-hipercam.dts
index f272e78..7f7746c 100644
--- a/arch/arm/dts/imx6dl-eltec-hipercam.dts
+++ b/arch/arm/dts/imx6dl-eltec-hipercam.dts
@@ -37,12 +37,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0xc0000>;
+ reg = <0x0 0xe0000>;
};
environment_nor0: partition@1 {
label = "bareboxenv";
- reg = <0xc0000 0x8000>;
+ reg = <0xe0000 0x20000>;
};
partition@2 {
diff --git a/arch/arm/dts/imx6dl-hummingboard.dts b/arch/arm/dts/imx6dl-hummingboard.dts
index 2314965..0152d6f 100644
--- a/arch/arm/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/dts/imx6dl-hummingboard.dts
@@ -29,11 +29,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
index 2324f3a..2fce915 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
@@ -53,11 +53,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6dl-wandboard.dts b/arch/arm/dts/imx6dl-wandboard.dts
index a867400..873e9d6 100644
--- a/arch/arm/dts/imx6dl-wandboard.dts
+++ b/arch/arm/dts/imx6dl-wandboard.dts
@@ -27,11 +27,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0xc0000>;
+ reg = <0x0 0xe0000>;
};
- environment_usdhc3: partition@c0000 {
+ environment_usdhc3: partition@e0000 {
label = "barebox-environment";
- reg = <0xc0000 0x40000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/dts/imx6q-dmo-edmqmx6.dts
index 071f5f5..d0362f5 100644
--- a/arch/arm/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/dts/imx6q-dmo-edmqmx6.dts
@@ -53,12 +53,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x20000>;
+ reg = <0xe0000 0x20000>;
};
};
};
@@ -97,11 +97,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
@@ -111,10 +111,10 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-embedsky-e9.dts b/arch/arm/dts/imx6q-embedsky-e9.dts
index 726d620..c4a9e41 100644
--- a/arch/arm/dts/imx6q-embedsky-e9.dts
+++ b/arch/arm/dts/imx6q-embedsky-e9.dts
@@ -41,11 +41,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
environment_mmc1: partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
@@ -55,10 +55,10 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
environment_mmc3: partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-guf-santaro.dts b/arch/arm/dts/imx6q-guf-santaro.dts
index 27f538a..74731d4 100644
--- a/arch/arm/dts/imx6q-guf-santaro.dts
+++ b/arch/arm/dts/imx6q-guf-santaro.dts
@@ -589,7 +589,7 @@
partition@0 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-hummingboard.dts b/arch/arm/dts/imx6q-hummingboard.dts
index e1d2fa8..0a83e80 100644
--- a/arch/arm/dts/imx6q-hummingboard.dts
+++ b/arch/arm/dts/imx6q-hummingboard.dts
@@ -29,11 +29,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi b/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi
index 0522465..107100e 100644
--- a/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi
+++ b/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi
@@ -181,10 +181,10 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
environment_usdhc3: partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
index 06f2f71..b4564c2 100644
--- a/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
@@ -62,11 +62,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6q-wandboard.dts b/arch/arm/dts/imx6q-wandboard.dts
index 26d8a00..0606727 100644
--- a/arch/arm/dts/imx6q-wandboard.dts
+++ b/arch/arm/dts/imx6q-wandboard.dts
@@ -27,11 +27,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0xc0000>;
+ reg = <0x0 0xe0000>;
};
- environment_usdhc3: partition@c0000 {
+ environment_usdhc3: partition@e0000 {
label = "barebox-environment";
- reg = <0xc0000 0x40000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
index 8fcd4e4..4a6b724 100644
--- a/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
@@ -31,12 +31,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
index b79ce2c..c3a0aa8 100644
--- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
@@ -180,11 +180,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
index 2a975d1..12f6766 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -256,11 +256,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6qdl-sabrelite.dtsi b/arch/arm/dts/imx6qdl-sabrelite.dtsi
index d5a6ff4..4de3aea 100644
--- a/arch/arm/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/dts/imx6qdl-sabrelite.dtsi
@@ -31,12 +31,12 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index 32318cf..f8746fa 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -31,11 +31,11 @@
partition@0 {
label = "barebox";
- reg = <0x0 0x80000>;
+ reg = <0x0 0xe0000>;
};
environment_usdhc3: partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6s-riotboard.dts b/arch/arm/dts/imx6s-riotboard.dts
index 3d0a930..322dab0 100644
--- a/arch/arm/dts/imx6s-riotboard.dts
+++ b/arch/arm/dts/imx6s-riotboard.dts
@@ -235,7 +235,7 @@
environment_usdhc4: partition@1 {
label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ reg = <0xe0000 0x20000>;
};
};
diff --git a/arch/arm/dts/imx6sx-sdb.dts b/arch/arm/dts/imx6sx-sdb.dts
index fbf098b..3cd1401 100644
--- a/arch/arm/dts/imx6sx-sdb.dts
+++ b/arch/arm/dts/imx6sx-sdb.dts
@@ -54,7 +54,7 @@
partition@0 {
label = "barebox-environment";
- reg = <0x80000 0x20000>;
+ reg = <0xe0000 0x20000>;
};
};
--
2.8.0.rc3
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location
2016-04-25 6:14 ` Sascha Hauer
@ 2016-04-25 11:06 ` Fabio Estevam
2016-04-26 6:46 ` Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: Fabio Estevam @ 2016-04-25 11:06 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox, Sam Ravnborg
Hi Sascha,
On Mon, Apr 25, 2016 at 3:14 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> diff --git a/arch/arm/dts/imx25-karo-tx25.dts b/arch/arm/dts/imx25-karo-tx25.dts
> index d661463..6e28ac9 100644
> --- a/arch/arm/dts/imx25-karo-tx25.dts
> +++ b/arch/arm/dts/imx25-karo-tx25.dts
> @@ -123,12 +123,12 @@
>
> partition@0 {
> label = "boot";
> - reg = <0x0 0x80000>;
> + reg = <0x0 0xe0000>;
> };
>
> partition@1 {
This should be "partition@0xe0000 {" to match the 'reg' property below.
> label = "environment";
> - reg = <0x80000 0x80000>;
> + reg = <0xe0000 0x20000>;
Same applies to other files.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location
2016-04-25 11:06 ` Fabio Estevam
@ 2016-04-26 6:46 ` Sascha Hauer
0 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2016-04-26 6:46 UTC (permalink / raw)
To: Fabio Estevam; +Cc: barebox, Sam Ravnborg
On Mon, Apr 25, 2016 at 08:06:45AM -0300, Fabio Estevam wrote:
> Hi Sascha,
>
> On Mon, Apr 25, 2016 at 3:14 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> > diff --git a/arch/arm/dts/imx25-karo-tx25.dts b/arch/arm/dts/imx25-karo-tx25.dts
> > index d661463..6e28ac9 100644
> > --- a/arch/arm/dts/imx25-karo-tx25.dts
> > +++ b/arch/arm/dts/imx25-karo-tx25.dts
> > @@ -123,12 +123,12 @@
> >
> > partition@0 {
> > label = "boot";
> > - reg = <0x0 0x80000>;
> > + reg = <0x0 0xe0000>;
> > };
> >
> > partition@1 {
>
> This should be "partition@0xe0000 {" to match the 'reg' property below.
Indeed, that's something I wanted to fix for longer now. I finally did
this ;)
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-26 6:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-23 23:01 [PATCH v2] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location Fabio Estevam
2016-04-25 6:14 ` Sascha Hauer
2016-04-25 11:06 ` Fabio Estevam
2016-04-26 6:46 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox