From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1axrTQ-0001f0-Bu for barebox@lists.infradead.org; Wed, 04 May 2016 07:43:57 +0000 Date: Wed, 4 May 2016 09:43:31 +0200 From: Sascha Hauer Message-ID: <20160504074331.GM19714@pengutronix.de> References: <20160419071110.GO9102@pengutronix.de> <20160421073206.GC21638@pengutronix.de> <20160427055908.GM7860@pengutronix.de> <1461877838.9103.173.camel@rtred1test09.kymeta.local> <1461953980.9103.189.camel@rtred1test09.kymeta.local> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Fwd: Micrel KSZ9031RN PHY problem To: Guillermo Rodriguez Garcia Cc: "barebox@lists.infradead.org" , Philipp Zabel , Trent Piepho On Tue, May 03, 2016 at 04:40:02PM +0200, Guillermo Rodriguez Garcia wrote: > Hello, > > 2016-04-29 20:18 GMT+02:00 Trent Piepho : > > On Fri, 2016-04-29 at 13:00 +0200, Guillermo Rodriguez Garcia wrote: > >> 2016-04-28 23:09 GMT+02:00 Trent Piepho : > >> > > >> > The first anreg start call will also un-powerdown the PHY if BMCR_PDOWN > >> > was set. I wonder if that is happening? > >> > >> That was a very good hint and it looks like this is exactly what is happening. > >> > >> genphy_restart_aneg() clears the BMCR_PDOWN bit and would get the phy > >> out of powerdown mode. I have added a trace right at the beginning of > >> genphy_restart_aneg and verified that BMCR_PDOWN bit was set before > >> genphy_restart_aneg clears it. > >> > >> Then, the datasheet for the ksz9031 [1], page 44, says: > >> > >> After this bit is changed from '1' to '0', an internal global reset is > >> automatically generated. Wait a minimum of 1ms before read/write > >> access to the PHY registers. > > > > Mystery solved! > > Indeed. Although it's strange that the problem can only be reproduced > with certain routers. I can reproduce it everytime when the board is > connected with a ComTrend VG-8050, but not with other routers.. > > > > >> So this seems to be what is causing the problem. At least on the > >> ksz9031 (don't know about others), a delay of 1ms is required when > >> coming out of powerdown mode. > > > > The kernel will take the phy in/out of powerdown mode as part of the PM > > suspend/resume calls, which is supported on all micrel phys since 2013. > > I don't see a delay in the kernel code and wonder why this hasn't been a > > problem? > > Perhaps this is due to the fact that it does not happen with every router. > > > Might be worth asking on net-dev if this is a known issue with > > some phys and how it is solved? Maybe it's an undiscovered cause of > > network flakiness after a resume. > > Would you be willing to help here? (i.e. report/ask about this on net-dev) > > > > >> What is the best way to fix this? We can add a 1ms delay in > >> genphy_restart_aneg (this is probably the easiest, and the delay is > >> small enough that it shouldn't make a difference for other phys that > >> might not need it). Or if this is not acceptable, perhaps add a custom > >> restart_aneg function for the ksz9031. > > > > Could add a custom init function that un-powerdowns the phy and does the > > wait. > > > > Or have restart_aneg check if the powerdown bit was set before it clears > > it, and only delay in that case. > > This would be easy, would solve the problem at hand, and would only > introduce a (perhaps unnecessary) 1ms delay for phys that don't need > this. > > > > > Having the un-powerdown in the restart_aneg isn't really the right place > > for it. If there is no reason the restart aneg, then the phy will not > > be powered up. > > Yes but I would say that that's a different issue. I must say I don't feel > confident enough to move this code to somewhere else myself. Perhaps > Sascha (as the original author of this change [1]) could comment. > > I would suggest so separate these two issues: 1) Adding the missing > 1ms delay as described in the Micrel datasheet, 2) Consider whether > the code should be refactored / reorganized. > > Does this make sense? Yes, makes sense. Currently I don't know a better place for clearing the BMCR_PDOWN bit. genphy_config_init would be a candidate, but it's not called for phys which have a custom .config_init hook. If I'm lucky I can find the ethernet adapter which motivated me to create ac48b10467ffb, it would be interesting to see which phy type the adapter has. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox