From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: v2016.05.0
Date: Mon, 9 May 2016 09:19:24 +0200 [thread overview]
Message-ID: <20160509071924.GS19714@pengutronix.de> (raw)
Hi All,
barebox-2016.05.0 is out.
Many changes in this release are mtd related. We have a new API for
accessing mtd devices based on physical erase blocks (PEBs). The API has
been the UBI IO layer, but is useful for other users aswell and has been
extracted from UBI.
With the help of this API the i.MX6 Nand update handler now does robust
updates: When updating barebox on Nand there is no moment anymore in
which the system is not bootable.
There are many other changes aswell, see below.
Sascha
----------------------------------------------------------------
Alexander Stein (15):
ARM i.MX35: Read reset source from CCM
mtd: cfi-flash: Set MTD's writebufsize
mtd: ubi: Set max_write_size to actual value read from flash
rbtree: Update to u-boot v2016.03
printk: Add printk_once
Add list_sort from u-boot v2016.03
printk: Add pr_cont
compiler*.h: include/linux/compiler*.h with Linux 4.5
module.h: Add THIS_MODULE
ARM: Add atomic.h from u-boot v2016.03
Move GFP_NOFS to barebox-wrapper
barebox-wrapper: Implement kfree and vfree as static inline functions
barebox-wrapper: Add kcalloc and __vmalloc
ubifs: update implementation from u-boot v2016.03
scripts: imx-image: Fix image size in flash header for i.MX35
Andreas Geisenhainer (1):
documentation: i2c_read() does not expect any "DATA".
Andrey Smirnov (20):
i.MX6: dts: Include local .dtsi's last
clk-imx6: Call clk_enable on mmdc_ch0_axi_podf
fec_imx: Deallocate clocks when probe fails
fec_imx: Deallocate I/O resources if probe fails
fec_imx: Free phy_reset GPIO if when probe fails
fec_imx: Use FEC_ECNTRL_RESET instead of a magic number
fec_imx: Implement reset timeout
fec_imx: Deallocate DMA buffers when probe fails
fec_imx: Unregister MDIO when probe fails
i.MX: Add revision detection for i.MX6D/Q Plus
ARM: Add errata 845369 workaround
i.MX6: Apply errata 845369 workaround
L2x0: i.MX6: Replace magic numbers with constants
i.MX6: Apply PL310 errata base on PL310's revision
i.MX6: PL310: Adjust settings for performance
common: Add EPROBE_DEFER to strerror
rtc: abracon: Check obtained time for validity
ds1307: Fix a bug in probe()
ds1307: Configure ds1341 for lowest power mode
sata-imx: Fix a typo
Antony Pavlov (1):
common: add dependency !SANDBOX on imd target tool
Jason Cobham (1):
ARM: i.MX53: ccxmx53: Fix memory detection.
Lucas Stach (1):
ARM: tegra: set up stack before calling maincluster entry
Markus Pargmann (3):
fs: Add for_each_fs_device_safe()
fs: umount based on device path and mount path
ubiformat: Cleanly umount and detach the ubi before formating
Miquel Raynal (1):
i2c_probe: fix wrong start and stop addresses
Renaud Barbier (1):
lib: declared buffer is too small to hold string
Sascha Hauer (75):
mtd: Add support for marking blocks as good
mtd: nand: Add option to print bbt in nand command
mtd: mtdpart: Add oob_read function
mtd: Introduce function to get mtd type string
mtd: rename mtd_all_ff -> mtd_buf_all_ff
mtd: Introduce mtd_check_pattern
mtd: nand-imx: Fix v1 controller ECC code
mtd: nand-imx: Fix correct_data return value for v2/v3 controllers
mtd: nand-imx: remove dead code
mtd: nand-imx: remove/replace debug print
mtd: remove unused debug defines
mtd: nand-imx: fix raw read/write
imd: use struct imd_header * as argument
imd: string returned from imd_string_data should be const
scripts: Add scripts/include/ to include path for target programs
imd: rename imd_search_validate to imd_get
imd: export functions
imd: Add function to read parameters
ARM: pbl-multi: Fix SDRAM at end of address space
ARM: start: Fix wrong format specifier
ARM: Do not use last 64KiB of address space for barebox
ARM: Rework vector table setup
ARM: i.MX6: esdctl: Fix memsize calculation for 4GiB/cs
ARM: i.MX6: esdctl: Fix CS0_end for 4GiB/cs
ARM: i.MX: remove unused imx-flash-header.h
ARM: i.MX: xload-esdhc: Add GPL header
ARM: i.MX: xload-esdhc: Fix typo successul -> successful
ARM: i.MX: xload-esdhc: Add debug messages
ARM: i.MX: xload-esdhc: Find entry in image
mtd: Introduce mtd-peb API
ubiformat: Use mtd-peb API
remove now unused libmtd
mtd: ubi: Use mtd_all_ff/mtd_check_pattern
mtd: ubi: Use mtd_peb_check_all_ff
mtd: ubi: Use mtd_peb_torture
mtd: ubi: Use mtd_peb_read
mtd: ubi: Use mtd_peb_write
mtd: ubi: Use mtd_peb_erase
mtd: ubi: Make debug options configurable
commands: Create nand_bitflip command
bbu: print and evaluate image Metadata
ARM: i.MX27: Fix gpt compatible for latest device trees
commands: nandtest: Fix wrong format specifier
mtd: doc3: Fix wrong format specifier
PPC: discard unused functions
PPC: atomic: remove non existing header include
decompressors: Use malloc/free wrappers
mtd: ubi: rename cdev.c to barebox.c
mtd: ubi: make ubi_detach_mtd_dev ubi internal
mtd: ubi: umount mounted volumes before detaching a ubi device
mtd: ubi: Add function to get ubi number from mtd device
commands: ubidetach: Allow mtd devices as argument
bbu: Allow to refresh/repair images
mtd: nand: export nand_check_erased_buf
imx-bbu-nand-fcb: factor out layout functions
imx-bbu-nand-fcb: Use mtd-peb API to write firmware
imx-bbu-nand-fcb: factor out a fcb write function
imx-bbu-nand-fcb: erase on demand
imx-bbu-nand-fcb: Only write FCBs/DBBTs when necessary
imx-bbu-nand-fcb: When writing firmware return new bad blocks
imx-bbu-nand-fcb: Print error when writing blocks fails
imx-bbu-nand-fcb: Make robust against power cuts
imx-bbu-nand-fcb: Print error message when out of pebs
Merge branch 'for-next/arm'
Merge branch 'for-next/imd'
Merge branch 'for-next/imx'
Merge branch 'for-next/imx-bbu-nand-fcb'
Merge branch 'for-next/misc'
Merge branch 'for-next/mtd-imx-nand'
Merge branch 'for-next/rtc'
Merge branch 'for-next/ubiformat'
Merge branch 'for-next/ubifs'
fix erasing/protecting flashes with unspecified size
filetype: Fix booting ARM Linux Kernels with CONFIG_EFI enabled
Release v2016.05.0
Uwe Kleine-König (1):
defaultenv-2: add automount for nfs
Documentation/user/updating.rst | 8 +
Makefile | 2 +-
.../ccxmx53/flash-header-imx53-ccxmx53_1gib.imxcfg | 2 +-
arch/arm/boards/ccxmx53/lowlevel.c | 41 +-
arch/arm/boards/efika-mx-smartbook/board.c | 1 -
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 1 -
arch/arm/boards/freescale-mx25-3ds/3stack.c | 1 -
arch/arm/boards/freescale-mx51-babbage/board.c | 1 -
arch/arm/boards/freescale-mx53-qsb/board.c | 1 -
arch/arm/boards/karo-tx53/board.c | 1 -
arch/arm/configs/eukrea_cpuimx25_defconfig | 2 -
arch/arm/configs/tx51stk5_defconfig | 2 -
arch/arm/cpu/entry.c | 3 +-
arch/arm/cpu/mmu.c | 164 +-
arch/arm/cpu/start.c | 2 +-
arch/arm/cpu/uncompress.c | 2 +-
arch/arm/dts/imx53-ccxmx53.dts | 1 +
arch/arm/dts/imx53-ccxmx53.dtsi | 5 +-
arch/arm/dts/imx6dl-cm-fx6.dts | 2 +-
arch/arm/dts/imx6dl-dfi-fs700-m60-6s.dts | 2 +-
arch/arm/dts/imx6dl-eltec-hipercam.dts | 2 +-
arch/arm/dts/imx6dl-nitrogen6x.dts | 2 +-
arch/arm/dts/imx6dl-phytec-pfla02.dtsi | 2 +-
arch/arm/dts/imx6dl-sabrelite.dts | 2 +-
arch/arm/dts/imx6dl-tqma6s.dtsi | 2 +-
arch/arm/dts/imx6s-phytec-pfla02.dtsi | 2 +-
arch/arm/dts/imx6s-riotboard.dts | 2 +-
arch/arm/include/asm/atomic.h | 111 +
arch/arm/include/asm/barebox-arm.h | 2 +-
arch/arm/include/asm/cache-l2x0.h | 8 +
arch/arm/include/asm/errata.h | 9 +
arch/arm/include/asm/proc-armv/system.h | 224 ++
arch/arm/lib/barebox.lds.S | 1 +
arch/arm/mach-imx/Kconfig | 52 -
arch/arm/mach-imx/clk-imx35.c | 20 +
arch/arm/mach-imx/clk-imx6.c | 1 +
arch/arm/mach-imx/cpu_init.c | 1 +
arch/arm/mach-imx/esdctl.c | 6 +-
arch/arm/mach-imx/imx-bbu-internal.c | 1 -
arch/arm/mach-imx/imx6-mmdc.c | 2 +-
arch/arm/mach-imx/imx6.c | 37 +-
arch/arm/mach-imx/include/mach/barebox.lds.h | 32 -
arch/arm/mach-imx/include/mach/imx-flash-header.h | 182 --
arch/arm/mach-imx/xload-esdhc.c | 24 +-
arch/arm/mach-omap/am33xx_bbu_nand.c | 2 +-
arch/arm/mach-omap/am33xx_bbu_spi_mlo.c | 2 +-
arch/arm/mach-tegra/include/mach/lowlevel.h | 7 +-
arch/ppc/Makefile | 1 +
arch/ppc/include/asm/atomic.h | 2 -
commands/Kconfig | 18 +-
commands/Makefile | 1 +
commands/barebox-update.c | 26 +-
commands/flash.c | 2 +-
commands/i2c.c | 4 +-
commands/nand-bitflip.c | 117 +
commands/nand.c | 79 +-
commands/ubi.c | 30 +-
commands/ubiformat.c | 215 +-
commands/umount.c | 2 +-
common/Kconfig | 1 +
common/bbu.c | 90 +-
common/environment.c | 3 +-
common/filetype.c | 5 +-
common/imd.c | 124 +-
common/imx-bbu-nand-fcb.c | 968 +++++-
common/misc.c | 1 +
defaultenv/defaultenv-2-base/init/automount | 8 +-
drivers/ata/sata-imx.c | 2 +-
drivers/mtd/Kconfig | 9 +
drivers/mtd/Makefile | 2 +-
drivers/mtd/core.c | 67 +-
drivers/mtd/mtdconcat.c | 24 +
drivers/mtd/nand/nand_base.c | 63 +-
drivers/mtd/nand/nand_imx.c | 241 +-
drivers/mtd/nor/cfi_flash.c | 1 +
drivers/mtd/partition.c | 38 +
drivers/mtd/peb.c | 658 ++++
drivers/mtd/ubi/Kconfig | 13 +
drivers/mtd/ubi/Makefile | 2 +-
drivers/mtd/ubi/attach.c | 2 +-
drivers/mtd/ubi/{cdev.c => barebox.c} | 57 +
drivers/mtd/ubi/build.c | 2 +-
drivers/mtd/ubi/debug.h | 51 +-
drivers/mtd/ubi/io.c | 415 +--
drivers/mtd/ubi/misc.c | 19 -
drivers/mtd/ubi/ubi-barebox.h | 2 -
drivers/mtd/ubi/ubi.h | 3 +-
drivers/mtd/ubi/wl.c | 5 -
drivers/net/fec_imx.c | 59 +-
drivers/rtc/rtc-abracon.c | 4 +-
drivers/rtc/rtc-ds1307.c | 22 +-
drivers/usb/gadget/dfu.c | 4 +-
drivers/usb/gadget/f_fastboot.c | 2 +-
fs/devfs-core.c | 1 +
fs/fs.c | 52 +-
fs/ubifs/Makefile | 2 +-
fs/ubifs/budget.c | 660 ++++-
fs/ubifs/debug.c | 3133 +++++++++++++++++++-
fs/ubifs/debug.h | 577 ++--
fs/ubifs/gc.c | 976 ++++++
fs/ubifs/io.c | 929 +++++-
fs/ubifs/key.h | 68 +-
fs/ubifs/log.c | 671 ++++-
fs/ubifs/lprops.c | 537 +++-
fs/ubifs/lpt.c | 1275 +++++++-
fs/ubifs/lpt_commit.c | 1904 +++++++++++-
fs/ubifs/master.c | 102 +-
fs/ubifs/misc.h | 164 +-
fs/ubifs/orphan.c | 672 ++++-
fs/ubifs/recovery.c | 755 +++--
fs/ubifs/replay.c | 603 ++--
fs/ubifs/sb.c | 558 +++-
fs/ubifs/scan.c | 116 +-
fs/ubifs/super.c | 2355 +++++++++++++--
fs/ubifs/tnc.c | 756 ++++-
fs/ubifs/tnc_misc.c | 127 +-
fs/ubifs/ubifs-media.h | 62 +-
fs/ubifs/ubifs.c | 828 +++++-
fs/ubifs/ubifs.h | 968 +++++-
include/asm-generic/atomic-long.h | 260 ++
include/asm-generic/barebox.lds.h | 7 +-
include/bbu.h | 2 +
include/fs.h | 3 +
include/image-metadata.h | 6 +
include/linux/barebox-wrapper.h | 16 +-
include/linux/compiler-gcc.h | 35 +-
include/linux/compiler-intel.h | 1 +
include/linux/compiler.h | 171 +-
include/linux/decompress/mm.h | 11 +-
include/linux/fs.h | 18 +-
include/linux/list_sort.h | 11 +
include/linux/mtd/mtd-abi.h | 1 +
include/linux/mtd/mtd.h | 25 +-
include/linux/mtd/nand.h | 3 +
include/linux/rbtree.h | 155 +-
include/linux/rbtree_augmented.h | 220 ++
include/module.h | 1 +
include/mtd/libmtd.h | 149 -
include/mtd/libscan.h | 3 +-
include/mtd/libubigen.h | 4 +-
include/mtd/mtd-peb.h | 24 +
include/mtd/ubi-user.h | 3 +-
include/printk.h | 11 +
lib/Kconfig | 3 -
lib/Makefile | 2 +-
lib/decompress_inflate.c | 19 +-
lib/decompress_unlz4.c | 10 +-
lib/decompress_unlzo.c | 10 +-
lib/decompress_unxz.c | 12 +-
lib/display_options.c | 2 +-
lib/libmtd.c | 368 ---
lib/libscan.c | 30 +-
lib/libubigen.c | 23 +-
lib/list_sort.c | 296 ++
lib/rbtree.c | 695 +++--
lib/xz/xz_dec_bcj.c | 2 +-
lib/xz/xz_dec_lzma2.c | 14 +-
lib/xz/xz_dec_stream.c | 6 +-
lib/xz/xz_private.h | 4 +-
lib/zlib_inflate/infutil.c | 8 +-
scripts/Makefile | 3 +-
scripts/bareboximd.c | 1 +
scripts/imx/imx.c | 7 +-
163 files changed, 21639 insertions(+), 4313 deletions(-)
create mode 100644 arch/arm/include/asm/atomic.h
create mode 100644 arch/arm/include/asm/proc-armv/system.h
delete mode 100644 arch/arm/mach-imx/include/mach/barebox.lds.h
delete mode 100644 arch/arm/mach-imx/include/mach/imx-flash-header.h
create mode 100644 commands/nand-bitflip.c
create mode 100644 drivers/mtd/peb.c
rename drivers/mtd/ubi/{cdev.c => barebox.c} (83%)
create mode 100644 fs/ubifs/gc.c
create mode 100644 include/asm-generic/atomic-long.h
create mode 100644 include/linux/list_sort.h
create mode 100644 include/linux/rbtree_augmented.h
delete mode 100644 include/mtd/libmtd.h
create mode 100644 include/mtd/mtd-peb.h
delete mode 100644 lib/libmtd.c
create mode 100644 lib/list_sort.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2016-05-09 7:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 7:19 Sascha Hauer [this message]
2016-05-19 4:01 ` v2016.05.0 Alexander Shiyan
2016-05-19 6:23 ` v2016.05.0 Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160509071924.GS19714@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox