From: Sascha Hauer <s.hauer@pengutronix.de>
To: Guillermo Rodriguez Garcia <guille.rodriguez@gmail.com>
Cc: barebox@lists.infradead.org, Philipp Zabel <pza@pengutronix.de>,
Trent Piepho <tpiepho@kymetacorp.com>
Subject: Re: [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031.
Date: Tue, 14 Jun 2016 08:39:19 +0200 [thread overview]
Message-ID: <20160614063919.GP31666@pengutronix.de> (raw)
In-Reply-To: <1465838955-24515-1-git-send-email-guille.rodriguez@gmail.com>
Hi Guillermo,
On Mon, Jun 13, 2016 at 07:29:15PM +0200, Guillermo Rodriguez Garcia wrote:
> From: grodriguez <guille.rodriguez@gmail.com>
>
> Commit da89ee8f2e04 ("Center FLP timing at 16ms") breaks
> genphy_restart_aneg() for Micrel's ksz9031. According to the
> datasheet, the ksz9031 requires a wait of 1ms after clearing
> the PDOWN bit and before read/write access to any PHY registers.
> ---
> drivers/net/phy/phy.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
I must say that I am not overly happy with this patch as it leaks in phy
specific stuff into a somewhat generic function. Anyway, I see the need
for this patch and so I applied it.
Sascha
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 73176fb..ed69d9b 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -561,7 +561,7 @@ int phy_wait_aneg_done(struct phy_device *phydev)
> */
> int genphy_restart_aneg(struct phy_device *phydev)
> {
> - int ctl;
> + int ctl, pdown;
>
> ctl = phy_read(phydev, MII_BMCR);
>
> @@ -574,6 +574,7 @@ int genphy_restart_aneg(struct phy_device *phydev)
> ctl &= ~(BMCR_ISOLATE);
>
> /* Clear powerdown bit which eventually is set on some phys */
> + pdown = ctl & BMCR_PDOWN;
> ctl &= ~BMCR_PDOWN;
>
> ctl = phy_write(phydev, MII_BMCR, ctl);
> @@ -581,6 +582,12 @@ int genphy_restart_aneg(struct phy_device *phydev)
> if (ctl < 0)
> return ctl;
>
> + /* Micrel's ksz9031 (and perhaps others?): Changing the PDOWN bit
> + * from '1' to '0' generates an internal reset. Must wait a minimum
> + * of 1ms before read/write access to the PHY registers. */
> + if (pdown)
> + mdelay(1);
> +
> return 0;
> }
>
> --
> 1.7.9.5
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-06-14 6:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CABDcavZr1PCpFrHVJFFayRQZ6vninf-xFS0H9QKSdA8u53OkDg@mail.gmail.com>
2016-04-18 14:49 ` Fwd: Micrel KSZ9031RN PHY problem Guillermo Rodriguez Garcia
2016-04-19 7:11 ` Sascha Hauer
2016-04-20 15:58 ` Guillermo Rodriguez Garcia
2016-04-21 7:32 ` Sascha Hauer
2016-04-21 11:04 ` Guillermo Rodriguez Garcia
2016-04-26 9:55 ` Guillermo Rodriguez Garcia
2016-04-26 11:10 ` Guillermo Rodriguez Garcia
2016-04-27 5:59 ` Sascha Hauer
2016-04-28 9:51 ` Guillermo Rodriguez Garcia
2016-04-28 21:09 ` Trent Piepho
2016-04-29 11:00 ` Guillermo Rodriguez Garcia
2016-04-29 18:18 ` Trent Piepho
2016-05-03 14:40 ` Guillermo Rodriguez Garcia
2016-05-04 7:43 ` Sascha Hauer
2016-05-04 10:39 ` Guillermo Rodriguez Garcia
2016-06-13 17:29 ` [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031 Guillermo Rodriguez Garcia
2016-06-14 6:39 ` Sascha Hauer [this message]
2016-06-14 7:39 ` Guillermo Rodriguez Garcia
2016-06-15 5:49 ` Sascha Hauer
2016-06-15 7:44 ` Guillermo Rodriguez Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160614063919.GP31666@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=guille.rodriguez@gmail.com \
--cc=pza@pengutronix.de \
--cc=tpiepho@kymetacorp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox