* [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment
@ 2016-06-19 8:31 Alexander Shiyan
2016-06-20 6:34 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Alexander Shiyan @ 2016-06-19 8:31 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/variscite-mx6/board.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boards/variscite-mx6/board.c b/arch/arm/boards/variscite-mx6/board.c
index 3585deb..267f68c 100644
--- a/arch/arm/boards/variscite-mx6/board.c
+++ b/arch/arm/boards/variscite-mx6/board.c
@@ -47,24 +47,19 @@
static int setup_pmic_voltages(void)
{
unsigned char value, rev_id = 0 ;
- struct i2c_adapter *adapter = NULL;
+ struct i2c_adapter *adapter;
struct i2c_client client;
- int addr = -1, bus = 0;
/* I2C2 bus (2-1 = 1 in barebox numbering) */
- bus = 1;
-
- /* PFUZE100 device address is 0x08 */
- addr = 0x08;
-
- adapter = i2c_get_adapter(bus);
+ adapter = i2c_get_adapter(1);
if (!adapter) {
- pr_err("i2c bus %d not found\n", bus);
+ pr_err("i2c2 bus not found\n");
return -ENODEV;
}
client.adapter = adapter;
- client.addr = addr;
+ /* PFUZE100 device address is 0x08 */
+ client.addr = 0x08;
/* Attempt to locate the PFUZE100 chip. */
if (i2c_read_reg(&client, 0x00, &value, 1) != 1) {
--
2.4.9
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment
2016-06-19 8:31 [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment Alexander Shiyan
@ 2016-06-20 6:34 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2016-06-20 6:34 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Sun, Jun 19, 2016 at 11:31:10AM +0300, Alexander Shiyan wrote:
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> arch/arm/boards/variscite-mx6/board.c | 15 +++++----------
> 1 file changed, 5 insertions(+), 10 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/variscite-mx6/board.c b/arch/arm/boards/variscite-mx6/board.c
> index 3585deb..267f68c 100644
> --- a/arch/arm/boards/variscite-mx6/board.c
> +++ b/arch/arm/boards/variscite-mx6/board.c
> @@ -47,24 +47,19 @@
> static int setup_pmic_voltages(void)
> {
> unsigned char value, rev_id = 0 ;
> - struct i2c_adapter *adapter = NULL;
> + struct i2c_adapter *adapter;
> struct i2c_client client;
> - int addr = -1, bus = 0;
>
> /* I2C2 bus (2-1 = 1 in barebox numbering) */
> - bus = 1;
> -
> - /* PFUZE100 device address is 0x08 */
> - addr = 0x08;
> -
> - adapter = i2c_get_adapter(bus);
> + adapter = i2c_get_adapter(1);
> if (!adapter) {
> - pr_err("i2c bus %d not found\n", bus);
> + pr_err("i2c2 bus not found\n");
> return -ENODEV;
> }
>
> client.adapter = adapter;
> - client.addr = addr;
> + /* PFUZE100 device address is 0x08 */
> + client.addr = 0x08;
>
> /* Attempt to locate the PFUZE100 chip. */
> if (i2c_read_reg(&client, 0x00, &value, 1) != 1) {
> --
> 2.4.9
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-20 6:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-19 8:31 [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment Alexander Shiyan
2016-06-20 6:34 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox