From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Kurz <akurz@blala.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM iMX53: avoid magic number addressing for internal RAM
Date: Mon, 27 Jun 2016 11:04:25 +0200 [thread overview]
Message-ID: <20160627090425.GD20657@pengutronix.de> (raw)
In-Reply-To: <1466950775-16822-1-git-send-email-akurz@blala.de>
On Sun, Jun 26, 2016 at 04:19:35PM +0200, Alexander Kurz wrote:
> The imx53 SOC features 128kB of internal SRAM which is commonly used in
> early stages of barebox to store the stack. Avoid magic numbers while
> addressing this RAM.
>
> Signed-off-by: Alexander Kurz <akurz@blala.de>
> ---
> arch/arm/boards/ccxmx53/lowlevel.c | 5 +++--
> arch/arm/boards/freescale-mx53-qsb/lowlevel.c | 5 +++--
> arch/arm/boards/freescale-mx53-smd/lowlevel.c | 3 ++-
> arch/arm/boards/guf-vincell/lowlevel.c | 2 +-
> arch/arm/boards/karo-tx53/lowlevel.c | 3 ++-
> arch/arm/boards/tqma53/lowlevel.c | 5 +++--
> arch/arm/mach-imx/include/mach/imx53-regs.h | 5 +++++
> 7 files changed, 19 insertions(+), 9 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/ccxmx53/lowlevel.c b/arch/arm/boards/ccxmx53/lowlevel.c
> index 55f6f36..2249214 100644
> --- a/arch/arm/boards/ccxmx53/lowlevel.c
> +++ b/arch/arm/boards/ccxmx53/lowlevel.c
> @@ -17,6 +17,7 @@
> #include <common.h>
> #include <linux/sizes.h>
> #include <io.h>
> +#include <mach/imx53-regs.h>
> #include <mach/esdctl.h>
> #include <mach/generic.h>
> #include <image-metadata.h>
> @@ -36,7 +37,7 @@ ENTRY_FUNCTION(start_ccxmx53_512mb, r0, r1, r2)
> void *fdt;
>
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> IMD_USED(ccxmx53_memsize_SZ_512M);
>
> @@ -50,7 +51,7 @@ ENTRY_FUNCTION(start_ccxmx53_1gib, r0, r1, r2)
> void *fdt;
>
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> IMD_USED(ccxmx53_memsize_SZ_1G);
>
> diff --git a/arch/arm/boards/freescale-mx53-qsb/lowlevel.c b/arch/arm/boards/freescale-mx53-qsb/lowlevel.c
> index ce6a290..bed8863 100644
> --- a/arch/arm/boards/freescale-mx53-qsb/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx53-qsb/lowlevel.c
> @@ -1,4 +1,5 @@
> #include <common.h>
> +#include <mach/imx53-regs.h>
> #include <mach/esdctl.h>
> #include <mach/generic.h>
> #include <asm/barebox-arm-head.h>
> @@ -12,7 +13,7 @@ ENTRY_FUNCTION(start_imx53_loco, r0, r1, r2)
> void *fdt;
>
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> fdt = __dtb_imx53_qsb_start - get_runtime_offset();
>
> @@ -26,7 +27,7 @@ ENTRY_FUNCTION(start_imx53_loco_r, r0, r1, r2)
> void *fdt;
>
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> fdt = __dtb_imx53_qsrb_start - get_runtime_offset();
>
> diff --git a/arch/arm/boards/freescale-mx53-smd/lowlevel.c b/arch/arm/boards/freescale-mx53-smd/lowlevel.c
> index 5ad0312..88c461d 100644
> --- a/arch/arm/boards/freescale-mx53-smd/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx53-smd/lowlevel.c
> @@ -1,4 +1,5 @@
> #include <common.h>
> +#include <mach/imx53-regs.h>
> #include <mach/esdctl.h>
> #include <mach/generic.h>
> #include <asm/barebox-arm-head.h>
> @@ -6,6 +7,6 @@
> void __naked barebox_arm_reset_vector(void)
> {
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
> imx53_barebox_entry(NULL);
> }
> diff --git a/arch/arm/boards/guf-vincell/lowlevel.c b/arch/arm/boards/guf-vincell/lowlevel.c
> index a72eaf8..af7c65d 100644
> --- a/arch/arm/boards/guf-vincell/lowlevel.c
> +++ b/arch/arm/boards/guf-vincell/lowlevel.c
> @@ -129,7 +129,7 @@ static noinline void imx53_guf_vincell_init(void *fdt)
> u32 r;
>
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> writel(0x0088494c, ccm + MX5_CCM_CBCDR);
> writel(0x02b12f0a, ccm + MX5_CCM_CSCMR2);
> diff --git a/arch/arm/boards/karo-tx53/lowlevel.c b/arch/arm/boards/karo-tx53/lowlevel.c
> index fdfb1b7..9f584fa 100644
> --- a/arch/arm/boards/karo-tx53/lowlevel.c
> +++ b/arch/arm/boards/karo-tx53/lowlevel.c
> @@ -2,13 +2,14 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
> #include <mach/imx5.h>
> +#include <mach/imx53-regs.h>
> #include <mach/esdctl.h>
> #include <mach/generic.h>
>
> void __naked barebox_arm_reset_vector(void)
> {
> imx5_cpu_lowlevel_init();
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> /*
> * For the TX53 rev 8030 the SDRAM setup is not stable without
> diff --git a/arch/arm/boards/tqma53/lowlevel.c b/arch/arm/boards/tqma53/lowlevel.c
> index 4e129e4..0cb5952 100644
> --- a/arch/arm/boards/tqma53/lowlevel.c
> +++ b/arch/arm/boards/tqma53/lowlevel.c
> @@ -5,6 +5,7 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
> #include <mach/imx5.h>
> +#include <mach/imx53-regs.h>
> #include <mach/generic.h>
> #include <image-metadata.h>
>
> @@ -44,7 +45,7 @@ ENTRY_FUNCTION(start_imx53_mba53_512mib, r0, r1, r2)
>
> imx5_cpu_lowlevel_init();
>
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> IMD_USED(tqma53_memsize_512M);
>
> @@ -63,7 +64,7 @@ ENTRY_FUNCTION(start_imx53_mba53_1gib, r0, r1, r2)
>
> imx5_cpu_lowlevel_init();
>
> - arm_setup_stack(0xf8020000 - 8);
> + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8);
>
> IMD_USED(tqma53_memsize_1G);
>
> diff --git a/arch/arm/mach-imx/include/mach/imx53-regs.h b/arch/arm/mach-imx/include/mach/imx53-regs.h
> index 9cd7723..d45c943 100644
> --- a/arch/arm/mach-imx/include/mach/imx53-regs.h
> +++ b/arch/arm/mach-imx/include/mach/imx53-regs.h
> @@ -1,8 +1,13 @@
> #ifndef __MACH_IMX53_REGS_H
> #define __MACH_IMX53_REGS_H
>
> +#include <linux/sizes.h>
> +
> #define MX53_IROM_BASE_ADDR 0x0
>
> +#define MX53_IRAM_BASE_ADDR 0xF8000000
> +#define MX53_IRAM_SIZE SZ_128K
> +
> #define MX53_SATA_BASE_ADDR 0x10000000
>
> #define MX53_IPU_BASE_ADDR 0x18000000
> --
> 2.1.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2016-06-27 9:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-26 14:19 Alexander Kurz
2016-06-27 9:04 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160627090425.GD20657@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=akurz@blala.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox