From: Sascha Hauer <s.hauer@pengutronix.de>
To: Teresa Remmet <t.remmet@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/4] OMAP: xload: Factor out reading image from mtd partition
Date: Thu, 30 Jun 2016 08:37:36 +0200 [thread overview]
Message-ID: <20160630063736.GW20657@pengutronix.de> (raw)
In-Reply-To: <1467194468-31049-1-git-send-email-t.remmet@phytec.de>
On Wed, Jun 29, 2016 at 12:01:05PM +0200, Teresa Remmet wrote:
> Remove code duplication of reading images out of mtd partitions.
>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
> ---
> arch/arm/mach-omap/xload.c | 71 ++++++++++++++--------------------------------
> 1 file changed, 22 insertions(+), 49 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index 7793819..91890b2 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -36,7 +36,7 @@ static void *read_image_head(const char *name)
>
> cdev = cdev_open(name, O_RDONLY);
> if (!cdev) {
> - printf("failed to open partition\n");
> + printf("failed to open %s\n", name);
> return NULL;
> }
>
> @@ -44,7 +44,7 @@ static void *read_image_head(const char *name)
> cdev_close(cdev);
>
> if (ret != ARM_HEAD_SIZE) {
> - printf("failed to read from partition\n");
> + printf("failed to read from %s\n", name);
> return NULL;
> }
>
> @@ -63,18 +63,14 @@ static unsigned int get_image_size(void *head)
> return ret;
> }
>
> -static void *omap_xload_boot_nand(int offset, int part_size)
> +static void *read_mtd_barebox(const char *partition)
> {
> int ret;
> int size;
> void *to, *header;
> struct cdev *cdev;
>
> - devfs_add_partition("nand0", offset, part_size,
> - DEVFS_PARTITION_FIXED, "x");
> - dev_add_bb_dev("x", "bbx");
> -
> - header = read_image_head("bbx");
> + header = read_image_head(partition);
> if (header == NULL)
> return NULL;
>
> @@ -86,21 +82,30 @@ static void *omap_xload_boot_nand(int offset, int part_size)
>
> to = xmalloc(size);
>
> - cdev = cdev_open("bbx", O_RDONLY);
> + cdev = cdev_open(partition, O_RDONLY);
> if (!cdev) {
> - printf("failed to open nand\n");
> + printf("failed to open partition\n");
> return NULL;
> }
>
> ret = cdev_read(cdev, to, size, 0, 0);
> if (ret != size) {
> - printf("failed to read from nand\n");
> + printf("failed to read from partition\n");
> return NULL;
> }
>
> return to;
> }
>
> +static void *omap_xload_boot_nand(struct omap_barebox_part *part)
> +{
> + devfs_add_partition("nand0", part->nand_offset, part->nand_size,
> + DEVFS_PARTITION_FIXED, "x");
> + dev_add_bb_dev("x", "bbx");
> +
> + return read_mtd_barebox("bbx");
> +}
> +
> static void *omap_xload_boot_mmc(void)
> {
> int ret;
> @@ -138,41 +143,12 @@ static void *omap_xload_boot_mmc(void)
> return buf;
> }
>
> -static void *omap_xload_boot_spi(int offset, int part_size)
> +static void *omap_xload_boot_spi(struct omap_barebox_part *part)
> {
> - int ret;
> - int size;
> - void *to, *header;
> - struct cdev *cdev;
> -
> - devfs_add_partition("m25p0", offset, part_size,
> + devfs_add_partition("m25p0", part->nor_offset, part->nor_size,
> DEVFS_PARTITION_FIXED, "x");
>
> - header = read_image_head("x");
> - if (header == NULL)
> - return NULL;
> -
> - size = get_image_size(header);
> - if (!size) {
> - printf("failed to get image size\n");
> - return NULL;
> - }
> -
> - to = xmalloc(size);
> -
> - cdev = cdev_open("x", O_RDONLY);
> - if (!cdev) {
> - printf("failed to open spi flash\n");
> - return NULL;
> - }
> -
> - ret = cdev_read(cdev, to, size, 0, 0);
> - if (ret != size) {
> - printf("failed to read from spi flash\n");
> - return NULL;
> - }
> -
> - return to;
> + return read_mtd_barebox("x");
> }
>
> static void *omap4_xload_boot_usb(void){
> @@ -323,13 +299,11 @@ static __noreturn int omap_xload(void)
> break;
> case BOOTSOURCE_NAND:
> printf("booting from NAND\n");
> - func = omap_xload_boot_nand(barebox_part->nand_offset,
> - barebox_part->nand_size);
> + func = omap_xload_boot_nand(barebox_part);
> break;
> case BOOTSOURCE_SPI:
> printf("booting from SPI\n");
> - func = omap_xload_boot_spi(barebox_part->nor_offset,
> - barebox_part->nor_size);
> + func = omap_xload_boot_spi(barebox_part);
> break;
> case BOOTSOURCE_SERIAL:
> if (IS_ENABLED(CONFIG_OMAP_SERIALBOOT)) {
> @@ -347,8 +321,7 @@ static __noreturn int omap_xload(void)
> }
> default:
> printf("unknown boot source. Fall back to nand\n");
> - func = omap_xload_boot_nand(barebox_part->nand_offset,
> - barebox_part->nand_size);
> + func = omap_xload_boot_nand(barebox_part);
> break;
> }
>
> --
> 1.9.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2016-06-30 6:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 10:01 Teresa Remmet
2016-06-29 10:01 ` [PATCH 2/4] OMAP: xload: nand: Check for redundant barebox partition Teresa Remmet
2016-06-29 10:01 ` [PATCH 3/4] OMAP: am33xx_bbu_nand: Extent barebox update handler Teresa Remmet
2016-06-29 10:01 ` [PATCH 4/4] ARM: phytec-som-am335x: Add backup partition for barebox Teresa Remmet
2016-06-30 6:37 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160630063736.GW20657@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=t.remmet@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox