From: Sascha Hauer <s.hauer@pengutronix.de>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: barebox@lists.infradead.org, Enrico Jorns <ejo@pengutronix.de>
Subject: Re: [PATCH] clk: socfpga: add divider registers to the main pll outputs
Date: Thu, 18 Aug 2016 08:22:47 +0200 [thread overview]
Message-ID: <20160818062247.GA20657@pengutronix.de> (raw)
In-Reply-To: <1470726028-32152-1-git-send-email-s.trumtrar@pengutronix.de>
On Tue, Aug 09, 2016 at 09:00:28AM +0200, Steffen Trumtrar wrote:
> From: Enrico Jorns <ejo@pengutronix.de>
>
> This patch is based on kernel patch 0691bb1b5a1865b3bbc9b7ce6e26eff546abb1cf
> by Dinh Nguyen <dinguyen@altera.com>.
>
> The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
> PLL go through a pre-divider before coming into the system. These registers
> were hidden for the CycloneV platform, but are now used for the ArriaV
> platform.
>
> This patch updates the clock driver to read the div-reg property for the
> socfpga-periph-clk clocks.
>
> Note: The registers used for the div-reg property are not documented but
> set by the preloader.
>
> Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
Applied, thanks
Sascha
> drivers/clk/socfpga.c | 25 ++++++++++++++++++++++---
> 1 file changed, 22 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/socfpga.c b/drivers/clk/socfpga.c
> index 37ed038be84c..6af0632cafc2 100644
> --- a/drivers/clk/socfpga.c
> +++ b/drivers/clk/socfpga.c
> @@ -116,18 +116,27 @@ struct clk_periph {
> const char *parent;
> unsigned regofs;
> unsigned int fixed_div;
> + void __iomem *div_reg;
> + unsigned int width;
> + unsigned int shift;
> };
>
> static unsigned long clk_periph_recalc_rate(struct clk *clk,
> unsigned long parent_rate)
> {
> struct clk_periph *periph = container_of(clk, struct clk_periph, clk);
> - u32 div;
> + u32 div, val;
>
> - if (periph->fixed_div)
> + if (periph->fixed_div) {
> div = periph->fixed_div;
> - else
> + } else {
> + if (periph->div_reg) {
> + val = readl(periph->div_reg) >> periph->shift;
> + val &= div_mask(periph->width);
> + parent_rate /= (val + 1);
> + }
> div = ((readl(clk_mgr_base_addr + periph->regofs) & 0x1ff) + 1);
> + }
>
> return parent_rate / div;
> }
> @@ -140,6 +149,7 @@ static struct clk *socfpga_periph_clk(struct device_node *node)
> {
> struct clk_periph *periph;
> int ret;
> + u32 div_reg[3];
>
> periph = xzalloc(sizeof(*periph));
>
> @@ -152,6 +162,15 @@ static struct clk *socfpga_periph_clk(struct device_node *node)
> periph->clk.name = xstrdup(node->name);
> periph->clk.ops = &clk_periph_ops;
>
> + ret = of_property_read_u32_array(node, "div-reg", div_reg, 3);
> + if (!ret) {
> + periph->div_reg = clk_mgr_base_addr + div_reg[0];
> + periph->shift = div_reg[1];
> + periph->width = div_reg[2];
> + } else {
> + periph->div_reg = 0;
> + }
> +
> of_property_read_u32(node, "reg", &periph->regofs);
> of_property_read_u32(node, "fixed-divider", &periph->fixed_div);
>
> --
> 2.8.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2016-08-18 6:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-09 7:00 Steffen Trumtrar
2016-08-18 6:22 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160818062247.GA20657@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=ejo@pengutronix.de \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox