mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux
Date: Thu, 18 Aug 2016 08:32:27 +0200	[thread overview]
Message-ID: <20160818063227.GE20657@pengutronix.de> (raw)
In-Reply-To: <1471383369-23015-1-git-send-email-antonynpavlov@gmail.com>

On Wed, Aug 17, 2016 at 12:36:09AM +0300, Antony Pavlov wrote:
> At the moment barebox tplink-mr3020.dts file has almost
> the same content as linux ar9331_tl_mr3020.dts file
> so we can reuse linux dts-file and drop duplicated lines
> from barebox dts-file.
> 
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
>  arch/mips/dts/tplink-mr3020.dts | 68 +----------------------------------------
>  1 file changed, 1 insertion(+), 67 deletions(-)

Applied, thanks

There is no difference between the two patches you sent, right?

Sascha


> 
> diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
> index 831fab8..1e843ee 100644
> --- a/arch/mips/dts/tplink-mr3020.dts
> +++ b/arch/mips/dts/tplink-mr3020.dts
> @@ -1,73 +1,7 @@
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -#include <mips/qca/ar9331.dtsi>
> +#include <mips/qca/ar9331_tl_mr3020.dts>
>  
>  / {
> -	model = "TP-Link TL-MR3020";
> -	compatible = "tplink,tl-mr3020";
> -
>  	aliases {
>  		spiflash = &spiflash;
>  	};
> -
> -	memory@0 {
> -		device_type = "memory";
> -		reg = <0x00000000 0x2000000>;
> -	};
> -
> -	leds {
> -		compatible = "gpio-leds";
> -
> -		wlan {
> -			label = "tp-link:green:wlan";
> -			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> -			default-state = "off";
> -		};
> -
> -		lan {
> -			label = "tp-link:green:lan";
> -			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> -			default-state = "off";
> -		};
> -
> -		wps {
> -			label = "tp-link:green:wps";
> -			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> -			default-state = "off";
> -		};
> -
> -		led3g {
> -			label = "tp-link:green:3g";
> -			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
> -			default-state = "off";
> -		};
> -	};
> -};
> -
> -&ref {
> -	clock-frequency = <25000000>;
> -};
> -
> -&uart {
> -	status = "okay";
> -};
> -
> -&gpio {
> -	status = "okay";
> -};
> -
> -&spi {
> -	num-chipselects = <1>;
> -	status = "okay";
> -
> -	/* Spansion S25FL032PIF SPI flash */
> -	spiflash: s25sl032p@0 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "spansion,s25sl032p", "jedec,spi-nor";
> -		spi-max-frequency = <104000000>;
> -		reg = <0>;
> -	};
>  };
> -- 
> 2.8.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2016-08-18  6:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-16 21:36 Antony Pavlov
2016-08-18  6:32 ` Sascha Hauer [this message]
2016-08-18  9:43   ` Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160818063227.GE20657@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox