* [PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux
@ 2016-08-16 21:36 Antony Pavlov
2016-08-18 6:32 ` Sascha Hauer
0 siblings, 1 reply; 3+ messages in thread
From: Antony Pavlov @ 2016-08-16 21:36 UTC (permalink / raw)
To: barebox
At the moment barebox tplink-mr3020.dts file has almost
the same content as linux ar9331_tl_mr3020.dts file
so we can reuse linux dts-file and drop duplicated lines
from barebox dts-file.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/mips/dts/tplink-mr3020.dts | 68 +----------------------------------------
1 file changed, 1 insertion(+), 67 deletions(-)
diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
index 831fab8..1e843ee 100644
--- a/arch/mips/dts/tplink-mr3020.dts
+++ b/arch/mips/dts/tplink-mr3020.dts
@@ -1,73 +1,7 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include <mips/qca/ar9331.dtsi>
+#include <mips/qca/ar9331_tl_mr3020.dts>
/ {
- model = "TP-Link TL-MR3020";
- compatible = "tplink,tl-mr3020";
-
aliases {
spiflash = &spiflash;
};
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x2000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- lan {
- label = "tp-link:green:lan";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wps {
- label = "tp-link:green:wps";
- gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led3g {
- label = "tp-link:green:3g";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Spansion S25FL032PIF SPI flash */
- spiflash: s25sl032p@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl032p", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
};
--
2.8.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux
2016-08-16 21:36 [PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux Antony Pavlov
@ 2016-08-18 6:32 ` Sascha Hauer
2016-08-18 9:43 ` Antony Pavlov
0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2016-08-18 6:32 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Wed, Aug 17, 2016 at 12:36:09AM +0300, Antony Pavlov wrote:
> At the moment barebox tplink-mr3020.dts file has almost
> the same content as linux ar9331_tl_mr3020.dts file
> so we can reuse linux dts-file and drop duplicated lines
> from barebox dts-file.
>
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> arch/mips/dts/tplink-mr3020.dts | 68 +----------------------------------------
> 1 file changed, 1 insertion(+), 67 deletions(-)
Applied, thanks
There is no difference between the two patches you sent, right?
Sascha
>
> diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
> index 831fab8..1e843ee 100644
> --- a/arch/mips/dts/tplink-mr3020.dts
> +++ b/arch/mips/dts/tplink-mr3020.dts
> @@ -1,73 +1,7 @@
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -#include <mips/qca/ar9331.dtsi>
> +#include <mips/qca/ar9331_tl_mr3020.dts>
>
> / {
> - model = "TP-Link TL-MR3020";
> - compatible = "tplink,tl-mr3020";
> -
> aliases {
> spiflash = &spiflash;
> };
> -
> - memory@0 {
> - device_type = "memory";
> - reg = <0x00000000 0x2000000>;
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - wlan {
> - label = "tp-link:green:wlan";
> - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> - default-state = "off";
> - };
> -
> - lan {
> - label = "tp-link:green:lan";
> - gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> - default-state = "off";
> - };
> -
> - wps {
> - label = "tp-link:green:wps";
> - gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> - default-state = "off";
> - };
> -
> - led3g {
> - label = "tp-link:green:3g";
> - gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
> - default-state = "off";
> - };
> - };
> -};
> -
> -&ref {
> - clock-frequency = <25000000>;
> -};
> -
> -&uart {
> - status = "okay";
> -};
> -
> -&gpio {
> - status = "okay";
> -};
> -
> -&spi {
> - num-chipselects = <1>;
> - status = "okay";
> -
> - /* Spansion S25FL032PIF SPI flash */
> - spiflash: s25sl032p@0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "spansion,s25sl032p", "jedec,spi-nor";
> - spi-max-frequency = <104000000>;
> - reg = <0>;
> - };
> };
> --
> 2.8.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux
2016-08-18 6:32 ` Sascha Hauer
@ 2016-08-18 9:43 ` Antony Pavlov
0 siblings, 0 replies; 3+ messages in thread
From: Antony Pavlov @ 2016-08-18 9:43 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On Thu, 18 Aug 2016 08:32:27 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Wed, Aug 17, 2016 at 12:36:09AM +0300, Antony Pavlov wrote:
> > At the moment barebox tplink-mr3020.dts file has almost
> > the same content as linux ar9331_tl_mr3020.dts file
> > so we can reuse linux dts-file and drop duplicated lines
> > from barebox dts-file.
> >
> > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> > ---
> > arch/mips/dts/tplink-mr3020.dts | 68 +----------------------------------------
> > 1 file changed, 1 insertion(+), 67 deletions(-)
>
> Applied, thanks
>
> There is no difference between the two patches you sent, right?
Yes, there is no difference. My bad --- I have used wrong maillist address in the first patch
(barebox@lists.infradead.orgc instead of barebox@lists.infradead.org).
> Sascha
>
>
> >
> > diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
> > index 831fab8..1e843ee 100644
> > --- a/arch/mips/dts/tplink-mr3020.dts
> > +++ b/arch/mips/dts/tplink-mr3020.dts
> > @@ -1,73 +1,7 @@
> > -/dts-v1/;
> > -
> > -#include <dt-bindings/gpio/gpio.h>
> > -
> > -#include <mips/qca/ar9331.dtsi>
> > +#include <mips/qca/ar9331_tl_mr3020.dts>
> >
> > / {
> > - model = "TP-Link TL-MR3020";
> > - compatible = "tplink,tl-mr3020";
> > -
> > aliases {
> > spiflash = &spiflash;
> > };
> > -
> > - memory@0 {
> > - device_type = "memory";
> > - reg = <0x00000000 0x2000000>;
> > - };
> > -
> > - leds {
> > - compatible = "gpio-leds";
> > -
> > - wlan {
> > - label = "tp-link:green:wlan";
> > - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> > - default-state = "off";
> > - };
> > -
> > - lan {
> > - label = "tp-link:green:lan";
> > - gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> > - default-state = "off";
> > - };
> > -
> > - wps {
> > - label = "tp-link:green:wps";
> > - gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> > - default-state = "off";
> > - };
> > -
> > - led3g {
> > - label = "tp-link:green:3g";
> > - gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
> > - default-state = "off";
> > - };
> > - };
> > -};
> > -
> > -&ref {
> > - clock-frequency = <25000000>;
> > -};
> > -
> > -&uart {
> > - status = "okay";
> > -};
> > -
> > -&gpio {
> > - status = "okay";
> > -};
> > -
> > -&spi {
> > - num-chipselects = <1>;
> > - status = "okay";
> > -
> > - /* Spansion S25FL032PIF SPI flash */
> > - spiflash: s25sl032p@0 {
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - compatible = "spansion,s25sl032p", "jedec,spi-nor";
> > - spi-max-frequency = <104000000>;
> > - reg = <0>;
> > - };
> > };
> > --
> > 2.8.1
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-08-18 9:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-16 21:36 [PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux Antony Pavlov
2016-08-18 6:32 ` Sascha Hauer
2016-08-18 9:43 ` Antony Pavlov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox