mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v3 6/8] ARM: Add phyCORE-RK3288 SOM support
Date: Thu, 1 Sep 2016 09:31:36 +0200	[thread overview]
Message-ID: <20160901073136.5dkjg2wqhpdvxmpp@pengutronix.de> (raw)
In-Reply-To: <1472559947-8248-1-git-send-email-w.egorov@phytec.de>

On Tue, Aug 30, 2016 at 02:25:47PM +0200, Wadim Egorov wrote:
> The phyCORE-RK3288 aka PCM-059 is a SoM (System on Module)
> containing a RK3288 SoC. The module can be connected to different
> carrier boards.
> 
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> ---
> Changes since v2:
> - fixed sdmmc/emmc partition layouts
> - renamed automount to automount-mmc to not overwrite the generic automount file
> - removed bootsource file and added it's content to a nv variable
> ---

Applied, thanks

Sascha

>  arch/arm/boards/Makefile                           |   1 +
>  arch/arm/boards/phytec-som-rk3288/Makefile         |   3 +
>  arch/arm/boards/phytec-som-rk3288/board.c          |  31 +++++
>  .../defaultenv-physom-rk3288/boot/emmc             |   6 +
>  .../defaultenv-physom-rk3288/boot/mmc              |   6 +
>  .../defaultenv-physom-rk3288/init/automount-mmc    |   7 +
>  .../defaultenv-physom-rk3288/nv/boot.default       |   1 +
>  arch/arm/boards/phytec-som-rk3288/lowlevel.c       |  44 ++++++
>  arch/arm/dts/Makefile                              |   1 +
>  arch/arm/dts/rk3288-phycore-som.dts                | 148 +++++++++++++++++++++
>  arch/arm/mach-rockchip/Kconfig                     |   7 +
>  images/Makefile.rockchip                           |   4 +
>  12 files changed, 259 insertions(+)
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/Makefile
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/board.c
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount-mmc
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/nv/boot.default
>  create mode 100644 arch/arm/boards/phytec-som-rk3288/lowlevel.c
>  create mode 100644 arch/arm/dts/rk3288-phycore-som.dts
> 
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 35b636f..23a8dbd 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -96,6 +96,7 @@ obj-$(CONFIG_MACH_PM9G45)			+= pm9g45/
>  obj-$(CONFIG_MACH_QIL_A9260)			+= qil-a926x/
>  obj-$(CONFIG_MACH_QIL_A9G20)			+= qil-a926x/
>  obj-$(CONFIG_MACH_RADXA_ROCK)			+= radxa-rock/
> +obj-$(CONFIG_MACH_PHYTEC_SOM_RK3288)		+= phytec-som-rk3288/
>  obj-$(CONFIG_MACH_REALQ7)			+= datamodul-edm-qmx6/
>  obj-$(CONFIG_MACH_RPI_COMMON)			+= raspberry-pi/
>  obj-$(CONFIG_MACH_SABRELITE)			+= freescale-mx6-sabrelite/
> diff --git a/arch/arm/boards/phytec-som-rk3288/Makefile b/arch/arm/boards/phytec-som-rk3288/Makefile
> new file mode 100644
> index 0000000..6f34c9a
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/Makefile
> @@ -0,0 +1,3 @@
> +obj-y += board.o
> +lwl-y += lowlevel.o
> +bbenv-y += defaultenv-physom-rk3288
> diff --git a/arch/arm/boards/phytec-som-rk3288/board.c b/arch/arm/boards/phytec-som-rk3288/board.c
> new file mode 100644
> index 0000000..8ea6c6c
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/board.c
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH,
> + * Author: Wadim Egorov <w.egorov@phytec.de>
> + *
> + * Device initialization for the phyCORE-RK3288 SoM
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <envfs.h>
> +
> +static int physom_devices_init(void)
> +{
> +	if (!of_machine_is_compatible("phytec,rk3288-phycore-som"))
> +		return 0;
> +
> +	barebox_set_hostname("pcm059");
> +	defaultenv_append_directory(defaultenv_physom_rk3288);
> +
> +	return 0;
> +}
> +device_initcall(physom_devices_init);
> diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc
> new file mode 100644
> index 0000000..731b07f
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +global.bootm.image=/mnt/emmc/linuximage
> +global.bootm.oftree=/mnt/emmc/oftree
> +
> +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rw rootwait"
> diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc
> new file mode 100644
> index 0000000..5b19dba
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +global.bootm.image=/mnt/sdmmc/linuximage
> +global.bootm.oftree=/mnt/sdmmc/oftree
> +
> +global.linux.bootargs.dyn.root="root=/dev/mmcblk1p2 rw rootwait"
> diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount-mmc b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount-mmc
> new file mode 100644
> index 0000000..8b3f043
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount-mmc
> @@ -0,0 +1,7 @@
> +#!/bin/sh
> +
> +mkdir -p /mnt/emmc
> +automount -d /mnt/emmc 'mshc0.probe=1 && [ -e /dev/mshc0.0 ] && mount /dev/mshc0.0 /mnt/emmc'
> +
> +mkdir -p /mnt/sdmmc
> +automount -d /mnt/sdmmc 'mshc1.probe=1 && [ -e /dev/mshc1.0 ] && mount /dev/mshc1.0 /mnt/sdmmc'
> diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/nv/boot.default b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/nv/boot.default
> new file mode 100644
> index 0000000..b4cedfc
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/nv/boot.default
> @@ -0,0 +1 @@
> +emmc mmc
> diff --git a/arch/arm/boards/phytec-som-rk3288/lowlevel.c b/arch/arm/boards/phytec-som-rk3288/lowlevel.c
> new file mode 100644
> index 0000000..7804a55
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-rk3288/lowlevel.c
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH,
> + * Author: Wadim Egorov <w.egorov@phytec.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <linux/sizes.h>
> +#include <asm/barebox-arm-head.h>
> +#include <asm/barebox-arm.h>
> +#include <mach/rk3288-regs.h>
> +#include <mach/grf_rk3288.h>
> +#include <mach/hardware.h>
> +#include <debug_ll.h>
> +
> +extern char __dtb_rk3288_phycore_som_start[];
> +
> +ENTRY_FUNCTION(start_rk3288_phycore_som, r0, r1, r2)
> +{
> +	void *fdt;
> +	arm_cpu_lowlevel_init();
> +
> +	if (IS_ENABLED(CONFIG_DEBUG_LL)) {
> +		struct rk3288_grf * const grf = (void *)RK3288_GRF_BASE;
> +		rk_clrsetreg(&grf->gpio4c_iomux,
> +			GPIO4C1_MASK << GPIO4C1_SHIFT |
> +			GPIO4C0_MASK << GPIO4C0_SHIFT,
> +			GPIO4C1_UART0BT_SOUT << GPIO4C1_SHIFT |
> +			GPIO4C0_UART0BT_SIN << GPIO4C0_SHIFT);
> +		INIT_LL();
> +	}
> +
> +	fdt = __dtb_rk3288_phycore_som_start - get_runtime_offset();
> +
> +	barebox_arm_entry(0x0, SZ_1G, fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 09bf68e..d1a3fe8 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -54,6 +54,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \
>  pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
>  pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
>  pbl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
> +pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
>  pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
>  pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
>  pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
> diff --git a/arch/arm/dts/rk3288-phycore-som.dts b/arch/arm/dts/rk3288-phycore-som.dts
> new file mode 100644
> index 0000000..5410bd1
> --- /dev/null
> +++ b/arch/arm/dts/rk3288-phycore-som.dts
> @@ -0,0 +1,148 @@
> +/*
> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH,
> + * Author: Wadim Egorov <w.egorov@phytec.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +
> +#include <arm/rk3288.dtsi>
> +
> +/ {
> +	model = "phycore-rk3288";
> +	compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
> +
> +	memory {
> +		reg = <0 0x40000000>;
> +	};
> +
> +	vcc33: fixedregulator@0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc33";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <100000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	vcc18: fixedregulator@1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc18";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart0;
> +
> +		environment-emmc {
> +			compatible = "barebox,environment";
> +			device-path = &emmc, "partname:barebox-environment";
> +			status = "disabled";
> +		};
> +
> +		environment-sdmmc {
> +			compatible = "barebox,environment";
> +			device-path = &sdmmc, "partname:barebox-environment";
> +			status = "disabled";
> +		};
> +	};
> +};
> +
> +&pinctrl {
> +	sdmmc {
> +		sdmmc_pwr: sdmmc-pwr {
> +			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&emmc {
> +	broken-cd;
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	disable-wp;
> +	non-removable;
> +	num-slots = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
> +	vmmc-supply = <&vcc33>;
> +	vqmmc-supply = <&vcc18>;
> +	status = "okay";
> +
> +	#size-cells = <1>;
> +	#address-cells = <1>;
> +
> +	partition@8000 {
> +		label = "spl";
> +		reg = <0x8000 0x8000>;
> +	};
> +
> +	partition@20000 {
> +		label = "barebox";
> +		reg = <0x20000 0x80000>;
> +	};
> +
> +	partition@a0000 {
> +		label = "barebox-environment";
> +		reg = <0xa0000 0x20000>;
> +	};
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	card-detect-delay = <200>;
> +	disable-wp;
> +	num-slots = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
> +	vmmc-supply = <&vcc33>;
> +	status = "okay";
> +
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	partition@8000 {
> +		label = "spl";
> +		reg = <0x8000 0x8000>;
> +	};
> +
> +	partition@20000 {
> +		label = "barebox";
> +		reg = <0x20000 0x80000>;
> +	};
> +
> +	partition@a0000 {
> +		label = "barebox-environment";
> +		reg = <0xa0000 0x20000>;
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
> +	reg-shift = <2>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index 71fcbe7..f2fa3c6 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -30,4 +30,11 @@ config MACH_RADXA_ROCK
>  	select MFD_ACT8846
>  	bool "Radxa rock board"
>  
> +config MACH_PHYTEC_SOM_RK3288
> +	depends on ARCH_RK3288
> +	select I2C
> +	bool "RK3288 phyCORE SOM"
> +	help
> +	  Say Y here if you are using a RK3288 based Phytecs SOM
> +
>  endmenu
> diff --git a/images/Makefile.rockchip b/images/Makefile.rockchip
> index 9715b92..3f1ee57 100644
> --- a/images/Makefile.rockchip
> +++ b/images/Makefile.rockchip
> @@ -5,3 +5,7 @@
>  pblx-$(CONFIG_MACH_RADXA_ROCK) += start_radxa_rock
>  FILE_barebox-radxa-rock.img = start_radxa_rock.pblx
>  image-$(CONFIG_MACH_RADXA_ROCK) += barebox-radxa-rock.img
> +
> +pblx-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += start_rk3288_phycore_som
> +FILE_barebox-rk3288-phycore-som.img = start_rk3288_phycore_som.pblx
> +image-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += barebox-rk3288-phycore-som.img
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2016-09-01  7:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-30 12:25 Wadim Egorov
2016-09-01  7:31 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160901073136.5dkjg2wqhpdvxmpp@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=w.egorov@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox