mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* How to configure and enable the barebox state?
@ 2016-10-13 13:38 Trostel Alain
  2016-10-14  9:58 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Trostel Alain @ 2016-10-13 13:38 UTC (permalink / raw)
  To: barebox

Hi,

I would like to configure and enable the barebox state. My assumption is
that I need to change the following device tree for my Phytec AM335x
SOM:

arch/arm/dts/am335x-phytec-phycore-som.dts

But from the documentation
(http://www.barebox.org/doc/latest/devicetree/bindings/barebox/barebox,state.html) it is not clear to me where exactly I need to add the variable node example. Furthermore, I have check that the 'CONFIG_OFDEVICE' is enabled.
So, where is the correct place to add the variable node configuration
and what needs to be enabled in barebox?

Best regards,
Alain
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2016-10-14  9:58 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-13 13:38 How to configure and enable the barebox state? Trostel Alain
2016-10-14  9:58 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox