From: Michael Grzeschik <m.grzeschik@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 3/4] partitions/dos: add function to write partition table
Date: Mon, 17 Oct 2016 15:29:22 +0200 [thread overview]
Message-ID: <20161017132923.31834-4-m.grzeschik@pengutronix.de> (raw)
In-Reply-To: <20161017132923.31834-1-m.grzeschik@pengutronix.de>
The function can be used to write an partition layout to the block device
based on its cdev layout. Only cdevs with flag DEVFS_PARTITION_IN_PT set
get written. The function also adds an static offset of 0x200000 to
ensure the mbr and bootloader will not be overwritten.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
common/partitions/dos.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++
include/disks.h | 1 +
2 files changed, 72 insertions(+)
diff --git a/common/partitions/dos.c b/common/partitions/dos.c
index 5f08e25..d7fa538 100644
--- a/common/partitions/dos.c
+++ b/common/partitions/dos.c
@@ -256,6 +256,77 @@ static void dos_partition(void *buf, struct block_device *blk,
&dsp->signature, "%08x", dsp);
}
+static inline void hdimage_setup_chs(unsigned int lba, unsigned char *chs)
+{
+ const unsigned int hpc = 255;
+ const unsigned int spt = 63;
+ unsigned int s, c;
+
+ chs[0] = (lba/spt)%hpc;
+ c = (lba/(spt * hpc));
+ s = (lba > 0) ?(lba%spt + 1) : 0;
+ chs[1] = ((c & 0x300) >> 2) | (s & 0xff);
+ chs[2] = (c & 0xff);
+}
+
+int write_dos_partition_table(struct block_device *blk, struct list_head *cdevs)
+{
+ char part_table[6+4*sizeof(struct partition_entry)+2];
+ struct cdev *cdev, *ct;
+ void *buf;
+ int ret;
+ int n = 0;
+ char *ptr;
+
+ /* prepare partition table entry */
+ ptr = part_table;
+ memset(ptr, 0, sizeof(part_table));
+
+ /* skip disk signature */
+ ptr += 6;
+ list_for_each_entry_safe(cdev, ct, cdevs, devices_list) {
+ if ((cdev->flags & DEVFS_IS_PARTITION) &&
+ (cdev->flags & DEVFS_PARTITION_IN_PT)) {
+ struct partition_entry *entry;
+ entry = (struct partition_entry *)
+ (ptr + n * sizeof(struct partition_entry));
+
+ /* add static offset to skip the mbr and bootloader */
+ cdev->offset += 4096 * SECTOR_SIZE;
+
+ entry->type = 0x83;
+ entry->partition_start = cdev->offset / SECTOR_SIZE;
+ entry->partition_size = cdev->size / SECTOR_SIZE;
+
+ hdimage_setup_chs(entry->partition_start,
+ entry->chs_begin);
+ hdimage_setup_chs(entry->partition_start +
+ entry->partition_size - 1,
+ entry->chs_end);
+ n++;
+ }
+ if (n == 4)
+ break;
+ }
+
+ ptr += 4 * sizeof(struct partition_entry);
+ ptr[0] = 0x55;
+ ptr[1] = 0xaa;
+
+ buf = read_mbr(blk);
+ if (!buf)
+ return -EIO;
+
+ /* manipulate block with prepared partition table */
+ memcpy(buf + 440, part_table, sizeof(part_table));
+
+ ret = write_mbr(blk, buf);
+
+ free(buf);
+
+ return ret;
+}
+
static struct partition_parser dos = {
.parse = dos_partition,
.type = filetype_mbr,
diff --git a/include/disks.h b/include/disks.h
index 9932750..432fb23 100644
--- a/include/disks.h
+++ b/include/disks.h
@@ -37,5 +37,6 @@ struct partition_entry {
} __attribute__ ((packed));
extern int parse_partition_table(struct block_device*);
+extern int write_dos_partition_table(struct block_device *blk, struct list_head *cdevs);
#endif /* DISKS_H */
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-10-17 13:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 13:29 [PATCH 0/4] Add support to modify mbr partition layout Michael Grzeschik
2016-10-17 13:29 ` [PATCH 1/4] partitions: add DEVFS_PARTITION_IN_PT flag Michael Grzeschik
2016-10-17 13:29 ` [PATCH 2/4] cmdlinepart: add option to set " Michael Grzeschik
2016-10-17 13:29 ` Michael Grzeschik [this message]
2016-10-18 6:07 ` [PATCH 3/4] partitions/dos: add function to write partition table Sascha Hauer
2016-10-26 9:12 ` Michael Grzeschik
2016-10-17 13:29 ` [PATCH 4/4] mci: add MBR write and read function to block devices Michael Grzeschik
2016-10-18 6:23 ` Sascha Hauer
2016-10-26 9:09 ` Michael Grzeschik
2016-10-26 9:40 ` Michael Grzeschik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161017132923.31834-4-m.grzeschik@pengutronix.de \
--to=m.grzeschik@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox