From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Cc: Enrico Jorns <ejo@pengutronix.de>
Subject: [PATCH 3/6] fs: squashfs: port zlib compression support from kernel
Date: Mon, 24 Oct 2016 08:28:40 +0200 [thread overview]
Message-ID: <20161024062843.2796-4-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20161024062843.2796-1-s.hauer@pengutronix.de>
From: Enrico Jorns <ejo@pengutronix.de>
As this is the default compression method for squashfs, make this the
default in kconfig selection, too
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
fs/squashfs/Kconfig | 10 ++++
fs/squashfs/Makefile | 1 +
fs/squashfs/zlib_wrapper.c | 132 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 143 insertions(+)
create mode 100644 fs/squashfs/zlib_wrapper.c
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index 928e3bb..085bfb6 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -17,6 +17,16 @@ menuconfig FS_SQUASHFS
embedded systems where low overhead is needed. Further information
and tools are available from http://squashfs.sourceforge.net.
+config SQUASHFS_ZLIB
+ bool
+ depends on FS_SQUASHFS
+ depends on ZLIB
+ default y
+
+if !SQUASHFS_ZLIB
+ comment "ZLIB support disabled"
+endif
+
config SQUASHFS_LZ4
bool
depends on FS_SQUASHFS
diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index 8590b09..7976e3f 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -13,3 +13,4 @@ obj-y += super.o
obj-$(CONFIG_SQUASHFS_XZ) += xz_wrapper.o
obj-$(CONFIG_SQUASHFS_LZO) += lzo_wrapper.o
obj-$(CONFIG_SQUASHFS_LZ4) += lz4_wrapper.o
+obj-$(CONFIG_SQUASHFS_ZLIB) += zlib_wrapper.o
diff --git a/fs/squashfs/zlib_wrapper.c b/fs/squashfs/zlib_wrapper.c
new file mode 100644
index 0000000..f422515
--- /dev/null
+++ b/fs/squashfs/zlib_wrapper.c
@@ -0,0 +1,132 @@
+/*
+ * Squashfs - a compressed read only filesystem for Linux
+ *
+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ * Phillip Lougher <phillip@squashfs.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2,
+ * or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * zlib_wrapper.c
+ */
+
+
+#include <linux/mutex.h>
+#include <linux/zlib.h>
+
+#include "squashfs_fs.h"
+#include "squashfs_fs_sb.h"
+#include "squashfs.h"
+#include "decompressor.h"
+#include "page_actor.h"
+
+static void *zlib_init(struct squashfs_sb_info *dummy, void *buff)
+{
+ z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ if (stream == NULL)
+ goto failed;
+ stream->workspace = vmalloc(zlib_inflate_workspacesize());
+ if (stream->workspace == NULL)
+ goto failed;
+
+ return stream;
+
+failed:
+ ERROR("Failed to allocate zlib workspace\n");
+ kfree(stream);
+ return ERR_PTR(-ENOMEM);
+}
+
+
+static void zlib_free(void *strm)
+{
+ z_stream *stream = strm;
+
+ if (stream)
+ vfree(stream->workspace);
+ kfree(stream);
+}
+
+
+static int zlib_uncompress(struct squashfs_sb_info *msblk, void *strm,
+ char **bh, int b, int offset, int length,
+ struct squashfs_page_actor *output)
+{
+ int zlib_err, zlib_init = 0, k = 0;
+ z_stream *stream = strm;
+
+ stream->avail_out = PAGE_CACHE_SIZE;
+ stream->next_out = squashfs_first_page(output);
+ stream->avail_in = 0;
+
+ do {
+ if (stream->avail_in == 0 && k < b) {
+ int avail = min(length, msblk->devblksize - offset);
+ length -= avail;
+ stream->next_in = bh[k] + offset;
+ stream->avail_in = avail;
+ offset = 0;
+ }
+
+ if (stream->avail_out == 0) {
+ stream->next_out = squashfs_next_page(output);
+ if (stream->next_out != NULL)
+ stream->avail_out = PAGE_CACHE_SIZE;
+ }
+
+ if (!zlib_init) {
+ zlib_err = zlib_inflateInit(stream);
+ if (zlib_err != Z_OK) {
+ squashfs_finish_page(output);
+ goto out;
+ }
+ zlib_init = 1;
+ }
+
+ zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
+
+ if (stream->avail_in == 0 && k < b)
+ kfree(bh[k++]);
+ } while (zlib_err == Z_OK);
+
+ squashfs_finish_page(output);
+
+ if (zlib_err != Z_STREAM_END)
+ goto out;
+
+ zlib_err = zlib_inflateEnd(stream);
+ if (zlib_err != Z_OK)
+ goto out;
+
+ if (k < b)
+ goto out;
+
+ return stream->total_out;
+
+out:
+ for (; k < b; k++)
+ kfree(bh[k]);
+
+ return -EIO;
+}
+
+const struct squashfs_decompressor squashfs_zlib_comp_ops = {
+ .init = zlib_init,
+ .free = zlib_free,
+ .decompress = zlib_uncompress,
+ .id = ZLIB_COMPRESSION,
+ .name = "zlib",
+ .supported = 1
+};
+
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-10-24 6:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-24 6:28 [PATCH v2] squashfs additional decompressors Sascha Hauer
2016-10-24 6:28 ` [PATCH 1/6] fs: squashfs: port lzo compression support from kernel Sascha Hauer
2016-10-24 6:28 ` [PATCH 2/6] fs: squashfs: port lz4 " Sascha Hauer
2016-10-24 6:28 ` Sascha Hauer [this message]
2016-10-24 6:28 ` [PATCH 4/6] Add filetype and detection for squashfs images Sascha Hauer
2016-10-24 6:28 ` [PATCH 5/6] fs: squashfs: append linux rootarg for ubi volume Sascha Hauer
2016-10-24 6:28 ` [PATCH 6/6] fs: squashfs: Enable squashfs XZ support when XZ is enabled Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2016-10-21 6:51 [PATCH 1/6] fs: squashfs: port lzo compression support from kernel Sascha Hauer
2016-10-21 6:51 ` [PATCH 3/6] fs: squashfs: port zlib " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161024062843.2796-4-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=ejo@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox