From: Sascha Hauer <s.hauer@pengutronix.de>
To: Maik Otto <m.otto@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank
Date: Tue, 15 Nov 2016 09:05:08 +0100 [thread overview]
Message-ID: <20161115080508.kperau6sb5el4uh7@pengutronix.de> (raw)
In-Reply-To: <1479116835-15439-1-git-send-email-m.otto@phytec.de>
On Mon, Nov 14, 2016 at 10:47:15AM +0100, Maik Otto wrote:
> tested with Micron MT42L128M64D2LL-25WT and MT42L128M64D2LL-25WT
>
> Signed-off-by: Maik Otto <m.otto@phytec.de>
> ---
> arch/arm/boards/phytec-phycore-omap4460/lowlevel.c | 32 +++++++++++++++++++-
> 1 files changed, 31 insertions(+), 1 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/phytec-phycore-omap4460/lowlevel.c b/arch/arm/boards/phytec-phycore-omap4460/lowlevel.c
> index c082594..71ab793 100644
> --- a/arch/arm/boards/phytec-phycore-omap4460/lowlevel.c
> +++ b/arch/arm/boards/phytec-phycore-omap4460/lowlevel.c
> @@ -30,6 +30,13 @@
> #include <asm/barebox-arm-head.h>
>
> #define TPS62361_VSEL0_GPIO 182
> +#define LPDDR2_2G 0x5
> +#define LPDDR2_4G 0x6
> +#define LPDDR2_DENSITY_MASK 0x3C
> +#define LPDDR2_DENSITY_SHIFT 2
> +#define EMIF_SDRAM_CONFIG 0x0008
> +#define EMIF_LPDDR2_MODE_REG_CONFIG 0x0050
> +#define EMIF_LPDDR2_MODE_REG_DATA 0x0040
>
> void set_muxconf_regs(void);
>
> @@ -61,8 +68,23 @@ static const struct ddr_regs ddr_regs_mt42L128M64_25_400_mhz = {
> .mr2 = 0x4
> };
>
> +static const struct ddr_regs ddr_regs_mt42L128M64D2LL_25_400_mhz = {
> + .tim1 = 0x10EB0662,
> + .tim2 = 0x205715D2,
> + .tim3 = 0x00B1C53F,
> + .phy_ctrl_1 = 0x849FF409,
> + .ref_ctrl = 0x00000618,
> + .config_init = 0x80001AB2,
> + .config_final = 0x80001AB2,
> + .zq_config = 0x500B3214,
> + .mr1 = 0x83,
> + .mr2 = 0x4
> +};
> +
> static void noinline pcm049_init_lowlevel(void)
> {
> + unsigned int density;
> +
> struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
> struct dpll_param mpu44xx = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
> struct dpll_param mpu4460 = OMAP4_MPU_DPLL_PARAM_19M2_MPU920;
> @@ -75,9 +97,17 @@ static void noinline pcm049_init_lowlevel(void)
> set_muxconf_regs();
>
> #ifdef CONFIG_1024MB_DDR2RAM
> + omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);
> + writel(EMIF_SDRAM_CONFIG, OMAP44XX_EMIF1_BASE +
> + EMIF_LPDDR2_MODE_REG_CONFIG);
> + density = (readl(OMAP44XX_EMIF1_BASE + EMIF_LPDDR2_MODE_REG_DATA) &
> + LPDDR2_DENSITY_MASK) >> LPDDR2_DENSITY_SHIFT;
> + if (density == LPDDR2_2G)
> omap4_ddr_init(&ddr_regs_mt42L128M64_25_400_mhz, &core);
> + else if (density == LPDDR2_4G)
> + omap4_ddr_init(&ddr_regs_mt42L128M64D2LL_25_400_mhz, &core);
> #else
> - omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);
> + omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);
> #endif
>
> /* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
> --
> 1.7.0.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2016-11-15 8:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-14 9:47 Maik Otto
2016-11-15 8:05 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161115080508.kperau6sb5el4uh7@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.otto@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox