* [RFCv2 1/2] serial: add driver for SiFive UART
2016-11-13 21:50 [RFCv2 0/2] add initial RISC-V architecture support Antony Pavlov
@ 2016-11-13 21:50 ` Antony Pavlov
2016-11-17 7:07 ` Sascha Hauer
2016-11-13 21:50 ` [RFCv2 2/2] add initial RISC-V architecture support Antony Pavlov
1 sibling, 1 reply; 5+ messages in thread
From: Antony Pavlov @ 2016-11-13 21:50 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
TODO:
* add speed setup support.
drivers/serial/Kconfig | 3 ++
drivers/serial/Makefile | 1 +
drivers/serial/serial_sifive.c | 109 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 113 insertions(+)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b112d7e..70509b9 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -117,6 +117,9 @@ config DRIVER_SERIAL_S3C_AUTOSYNC
Say Y here if you want to use the auto flow feature of this
UART. RTS and CTS will be handled by the hardware when enabled.
+config DRIVER_SERIAL_SIFIVE
+ bool "SiFive serial driver"
+
config DRIVER_SERIAL_PXA
bool "PXA serial driver"
depends on ARCH_PXA
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 189e777..368e992 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_DRIVER_SERIAL_AUART) += serial_auart.o
obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO) += efi-stdio.o
obj-$(CONFIG_DRIVER_SERIAL_DIGIC) += serial_digic.o
+obj-$(CONFIG_DRIVER_SERIAL_SIFIVE) += serial_sifive.o
diff --git a/drivers/serial/serial_sifive.c b/drivers/serial/serial_sifive.c
new file mode 100644
index 0000000..06e3521
--- /dev/null
+++ b/drivers/serial/serial_sifive.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <io.h>
+
+#define UART_RX_OFFSET 0
+#define UART_TX_OFFSET 0
+#define UART_TX_COUNT_OFFSET 0x4
+#define UART_RX_COUNT_OFFSET 0x8
+#define UART_DIVIDER_OFFSET 0xC
+
+static inline uint32_t sifive_serial_readl(struct console_device *cdev,
+ uint32_t offset)
+{
+ void __iomem *base = cdev->dev->priv;
+
+ return readl(base + offset);
+}
+
+static inline void sifive_serial_writel(struct console_device *cdev,
+ uint32_t value, uint32_t offset)
+{
+ void __iomem *base = cdev->dev->priv;
+
+ writel(value, base + offset);
+}
+
+static int sifive_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ /* FIXME: no baudrate setup at the momement :( */
+
+ return 0;
+}
+
+static void sifive_serial_putc(struct console_device *cdev, char c)
+{
+ sifive_serial_writel(cdev, c, UART_TX_OFFSET);
+}
+
+static int sifive_serial_getc(struct console_device *cdev)
+{
+ uint32_t rxcnt;
+
+ do {
+ rxcnt = sifive_serial_readl(cdev, UART_RX_COUNT_OFFSET);
+ } while (!rxcnt);
+
+ return sifive_serial_readl(cdev, UART_RX_OFFSET);
+}
+
+static int sifive_serial_tstc(struct console_device *cdev)
+{
+ uint32_t rxcnt = sifive_serial_readl(cdev, UART_RX_COUNT_OFFSET);
+
+ return (rxcnt != 0);
+}
+
+static int sifive_serial_probe(struct device_d *dev)
+{
+ struct resource *iores;
+ struct console_device *cdev;
+
+ cdev = xzalloc(sizeof(struct console_device));
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+ dev->priv = IOMEM(iores->start);
+ cdev->dev = dev;
+ cdev->tstc = &sifive_serial_tstc;
+ cdev->putc = &sifive_serial_putc;
+ cdev->getc = &sifive_serial_getc;
+ cdev->setbrg = &sifive_serial_setbaudrate;
+
+ console_register(cdev);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id sifive_serial_dt_ids[] = {
+ {
+ .compatible = "sifive,uart",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d sifive_serial_driver = {
+ .name = "sifive-uart",
+ .probe = sifive_serial_probe,
+ .of_compatible = DRV_OF_COMPAT(sifive_serial_dt_ids),
+};
+console_platform_driver(sifive_serial_driver);
--
2.10.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* [RFCv2 2/2] add initial RISC-V architecture support
2016-11-13 21:50 [RFCv2 0/2] add initial RISC-V architecture support Antony Pavlov
2016-11-13 21:50 ` [RFCv2 1/2] serial: add driver for SiFive UART Antony Pavlov
@ 2016-11-13 21:50 ` Antony Pavlov
1 sibling, 0 replies; 5+ messages in thread
From: Antony Pavlov @ 2016-11-13 21:50 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
TODOs:
* split this patch.
* use sifive timer IP-block.
Documentation/boards/riscv.rst | 63 +++++++++++++++++++
arch/riscv/Kconfig | 42 +++++++++++++
arch/riscv/Makefile | 51 +++++++++++++++
arch/riscv/boards/qemu-sifive/.gitignore | 1 +
arch/riscv/boards/qemu-sifive/Makefile | 1 +
arch/riscv/boards/qemu-sifive/board.c | 28 +++++++++
arch/riscv/boot/Makefile | 2 +
arch/riscv/boot/main_entry.c | 40 ++++++++++++
arch/riscv/boot/start.S | 44 +++++++++++++
arch/riscv/configs/qemu-sifive_defconfig | 75 ++++++++++++++++++++++
arch/riscv/dts/.gitignore | 1 +
arch/riscv/dts/Makefile | 9 +++
arch/riscv/dts/qemu-sifive.dts | 19 ++++++
arch/riscv/dts/skeleton.dtsi | 13 ++++
arch/riscv/include/asm/barebox.h | 1 +
arch/riscv/include/asm/bitops.h | 35 +++++++++++
arch/riscv/include/asm/bitsperlong.h | 10 +++
arch/riscv/include/asm/byteorder.h | 12 ++++
arch/riscv/include/asm/common.h | 6 ++
arch/riscv/include/asm/elf.h | 11 ++++
arch/riscv/include/asm/io.h | 8 +++
arch/riscv/include/asm/posix_types.h | 1 +
arch/riscv/include/asm/sections.h | 1 +
arch/riscv/include/asm/string.h | 1 +
arch/riscv/include/asm/swab.h | 6 ++
arch/riscv/include/asm/types.h | 60 ++++++++++++++++++
arch/riscv/include/asm/unaligned.h | 19 ++++++
arch/riscv/lib/.gitignore | 1 +
arch/riscv/lib/Makefile | 3 +
arch/riscv/lib/asm-offsets.c | 12 ++++
arch/riscv/lib/barebox.lds.S | 87 ++++++++++++++++++++++++++
arch/riscv/lib/dtb.c | 41 ++++++++++++
arch/riscv/mach-sifive/Kconfig | 16 +++++
arch/riscv/mach-sifive/Makefile | 3 +
arch/riscv/mach-sifive/include/mach/debug_ll.h | 38 +++++++++++
drivers/of/Kconfig | 2 +-
36 files changed, 762 insertions(+), 1 deletion(-)
diff --git a/Documentation/boards/riscv.rst b/Documentation/boards/riscv.rst
new file mode 100644
index 0000000..f22504a
--- /dev/null
+++ b/Documentation/boards/riscv.rst
@@ -0,0 +1,63 @@
+RISC-V
+======
+
+At the moment only qemu emulator is supported (see https://github.com/riscv/riscv-isa-sim
+for details).
+
+Running RISC-V barebox
+----------------------
+
+Obtain RISC-V GCC/Newlib Toolchain,
+see https://github.com/riscv/riscv-tools/blob/master/README.md
+for details. The ``build.sh`` script from ``riscv-tools`` should
+create toolchain.
+
+Next compile qemu emulator::
+
+ $ git clone https://github.com/riscv/riscv-qemu
+ $ cd riscv-qemu
+ $ cap="no" ./configure \
+ --extra-cflags="-Wno-maybe-uninitialized" \
+ --audio-drv-list="" \
+ --disable-attr \
+ --disable-blobs \
+ --disable-bluez \
+ --disable-brlapi \
+ --disable-curl \
+ --disable-curses \
+ --disable-docs \
+ --disable-kvm \
+ --disable-spice \
+ --disable-sdl \
+ --disable-vde \
+ --disable-vnc-sasl \
+ --disable-werror \
+ --enable-trace-backend=simple \
+ --disable-stack-protector \
+ --target-list=riscv32-softmmu,riscv64-softmmu
+ $ make
+
+Next compile barebox::
+
+ $ make qemu-sifive_defconfig ARCH=riscv
+ ...
+ $ make ARCH=riscv CROSS_COMPILE=<path to your riscv toolchain>/riscv64-unknown-elf-
+
+Run barebox::
+
+ $ <path to riscv-qemu source>/riscv64-softmmu/qemu-system-riscv64 \
+ -nographic -M sifive -kernel <path to barebox sources >/barebox \
+ -serial stdio -monitor none -trace file=/dev/null
+
+ Switch to console [cs0]
+
+
+ barebox 2016.11.0-00006-g3c29f61 #1 Mon Nov 13 22:21:03 MSK 2016
+
+
+ Board: QEMU SiFive
+ Warning: Using dummy clocksource
+ malloc space: 0x00800000 -> 0x00bfffff (size 4 MiB)
+ running /env/bin/init...
+ /env/bin/init not found
+ barebox:/
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
new file mode 100644
index 0000000..baf9ce0
--- /dev/null
+++ b/arch/riscv/Kconfig
@@ -0,0 +1,42 @@
+config RISCV
+ bool
+ select GENERIC_FIND_NEXT_BIT
+ select OFTREE
+ select HAVE_CONFIGURABLE_MEMORY_LAYOUT
+ select HAVE_CONFIGURABLE_TEXT_BASE
+ default y
+
+config GENERIC_LINKER_SCRIPT
+ bool
+ default y
+
+menu "Machine selection"
+
+choice
+ prompt "System type"
+ default MACH_SIFIVE
+
+config MACH_SIFIVE
+ bool "SiFive"
+
+endchoice
+
+config BUILTIN_DTB
+ bool "link a DTB into the barebox image"
+ depends on OFTREE
+
+config BUILTIN_DTB_NAME
+ string "DTB to build into the barebox image"
+ depends on BUILTIN_DTB
+
+source arch/riscv/mach-sifive/Kconfig
+
+endmenu
+
+source common/Kconfig
+source commands/Kconfig
+source net/Kconfig
+source drivers/Kconfig
+source fs/Kconfig
+source lib/Kconfig
+source crypto/Kconfig
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
new file mode 100644
index 0000000..cebcce5
--- /dev/null
+++ b/arch/riscv/Makefile
@@ -0,0 +1,51 @@
+CPPFLAGS += -fno-strict-aliasing
+
+cflags-y += -fno-pic -pipe
+cflags-y += -Wall -Wmissing-prototypes -Wstrict-prototypes \
+ -Wno-uninitialized -Wno-format -Wno-main
+
+LDFLAGS += $(ldflags-y)
+LDFLAGS_barebox += -nostdlib
+
+machine-$(CONFIG_MACH_SIFIVE) := sifive
+board-$(CONFIG_BOARD_QEMU_SIFIVE) := qemu-sifive
+
+TEXT_BASE = $(CONFIG_TEXT_BASE)
+CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
+
+machdirs := $(patsubst %,arch/riscv/mach-%/,$(machine-y))
+
+ifeq ($(KBUILD_SRC),)
+CPPFLAGS += $(patsubst %,-I%include,$(machdirs))
+else
+CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
+endif
+
+archprepare: maketools
+
+PHONY += maketools
+
+ifneq ($(machine-y),)
+MACH := arch/riscv/mach-$(machine-y)/
+else
+MACH :=
+endif
+
+ifneq ($(board-y),)
+BOARD := arch/riscv/boards/$(board-y)/
+else
+BOARD :=
+endif
+
+common-y += $(BOARD) $(MACH)
+common-y += arch/riscv/lib/
+common-y += arch/riscv/boot/
+
+common-$(CONFIG_OFTREE) += arch/riscv/dts/
+
+CPPFLAGS += $(cflags-y)
+CFLAGS += $(cflags-y)
+
+lds-y := arch/riscv/lib/barebox.lds
+
+CLEAN_FILES += arch/riscv/lib/barebox.lds
diff --git a/arch/riscv/boards/qemu-sifive/.gitignore b/arch/riscv/boards/qemu-sifive/.gitignore
new file mode 100644
index 0000000..d116578
--- /dev/null
+++ b/arch/riscv/boards/qemu-sifive/.gitignore
@@ -0,0 +1 @@
+barebox.lds
diff --git a/arch/riscv/boards/qemu-sifive/Makefile b/arch/riscv/boards/qemu-sifive/Makefile
new file mode 100644
index 0000000..dcfc293
--- /dev/null
+++ b/arch/riscv/boards/qemu-sifive/Makefile
@@ -0,0 +1 @@
+obj-y += board.o
diff --git a/arch/riscv/boards/qemu-sifive/board.c b/arch/riscv/boards/qemu-sifive/board.c
new file mode 100644
index 0000000..ecda850
--- /dev/null
+++ b/arch/riscv/boards/qemu-sifive/board.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+
+static int hostname_init(void)
+{
+ barebox_set_hostname("barebox");
+
+ return 0;
+}
+postcore_initcall(hostname_init);
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
new file mode 100644
index 0000000..d6d28ce
--- /dev/null
+++ b/arch/riscv/boot/Makefile
@@ -0,0 +1,2 @@
+obj-y += start.o
+obj-y += main_entry.o
diff --git a/arch/riscv/boot/main_entry.c b/arch/riscv/boot/main_entry.c
new file mode 100644
index 0000000..18db86d
--- /dev/null
+++ b/arch/riscv/boot/main_entry.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <memory.h>
+#include <asm-generic/memory_layout.h>
+#include <asm/sections.h>
+
+void main_entry(void);
+
+/**
+ * Called plainly from assembler code
+ *
+ * @note The C environment isn't initialized yet
+ */
+void main_entry(void)
+{
+ /* clear the BSS first */
+ memset(__bss_start, 0x00, __bss_stop - __bss_start);
+
+ mem_malloc_init((void *)MALLOC_BASE,
+ (void *)(MALLOC_BASE + MALLOC_SIZE - 1));
+
+ start_barebox();
+}
diff --git a/arch/riscv/boot/start.S b/arch/riscv/boot/start.S
new file mode 100644
index 0000000..1c7612c
--- /dev/null
+++ b/arch/riscv/boot/start.S
@@ -0,0 +1,44 @@
+/*
+ * Startup Code for MIPS CPU
+ *
+ * based on coreboot/src/arch/riscv/bootblock.S
+ *
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm-generic/memory_layout.h>
+
+ .text
+ .section ".text_bare_init"
+ .align 4
+
+.globl _start
+_start:
+
+ li sp, STACK_BASE + STACK_SIZE
+
+ # make room for HLS and initialize it
+ addi sp, sp, -64 /* MENTRY_FRAME_SIZE */
+
+ # poison the stack
+ li t1, STACK_BASE
+ li t0, 0xdeadbeef
+ sd t0, 0(t1)
+
+ # clear any pending interrupts
+ csrwi mip, 0
+
+ tail main_entry
diff --git a/arch/riscv/configs/qemu-sifive_defconfig b/arch/riscv/configs/qemu-sifive_defconfig
new file mode 100644
index 0000000..774dfad
--- /dev/null
+++ b/arch/riscv/configs/qemu-sifive_defconfig
@@ -0,0 +1,75 @@
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="qemu-sifive"
+# CONFIG_GLOBALVAR is not set
+CONFIG_TEXT_BASE=0x00001000
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x007f0000
+CONFIG_STACK_SIZE=0x10000
+CONFIG_MALLOC_BASE=0x00800000
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_BOOTM is not set
+CONFIG_PARTITION=y
+# CONFIG_ENV_HANDLING is not set
+CONFIG_DEFAULT_COMPRESSION_GZIP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_CMD_DMESG=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_AUTOMOUNT=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_DEFAULTENV=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_CMP=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA224SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_SHA384SUM=y
+CONFIG_CMD_SHA512SUM=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_GETOPT=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_DISPLAY_TIMINGS=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_OFDEVICE=y
+CONFIG_DRIVER_SERIAL_SIFIVE=y
+# CONFIG_SPI is not set
+# CONFIG_PINCTRL is not set
+CONFIG_FS_BPKFS=y
+CONFIG_FS_UIMAGEFS=y
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_XZ_DECOMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DIGEST_HMAC_GENERIC=y
diff --git a/arch/riscv/dts/.gitignore b/arch/riscv/dts/.gitignore
new file mode 100644
index 0000000..077903c
--- /dev/null
+++ b/arch/riscv/dts/.gitignore
@@ -0,0 +1 @@
+*dtb*
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
new file mode 100644
index 0000000..f8380b1
--- /dev/null
+++ b/arch/riscv/dts/Makefile
@@ -0,0 +1,9 @@
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_NAME))
+obj-$(CONFIG_BUILTIN_DTB) += $(BUILTIN_DTB).dtb.o
+
+# just to build a built-in.o. Otherwise compilation fails when no devicetree is
+# created.
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts
diff --git a/arch/riscv/dts/qemu-sifive.dts b/arch/riscv/dts/qemu-sifive.dts
new file mode 100644
index 0000000..61945f2
--- /dev/null
+++ b/arch/riscv/dts/qemu-sifive.dts
@@ -0,0 +1,19 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "QEMU SiFive";
+ compatible = "sifive,qemu";
+
+ /* Digilent Arty has 256MB DDR3L */
+ memory {
+ device_type = "memory";
+ reg = <0 0x0 0x10000000>;
+ };
+
+ uart: uart {
+ compatible = "sifive,uart";
+ reg = <0 0x40002000 0x10>;
+ };
+};
diff --git a/arch/riscv/dts/skeleton.dtsi b/arch/riscv/dts/skeleton.dtsi
new file mode 100644
index 0000000..38ead82
--- /dev/null
+++ b/arch/riscv/dts/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value. The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+ memory { device_type = "memory"; reg = <0 0 0>; };
+};
diff --git a/arch/riscv/include/asm/barebox.h b/arch/riscv/include/asm/barebox.h
new file mode 100644
index 0000000..2997587
--- /dev/null
+++ b/arch/riscv/include/asm/barebox.h
@@ -0,0 +1 @@
+/* dummy */
diff --git a/arch/riscv/include/asm/bitops.h b/arch/riscv/include/asm/bitops.h
new file mode 100644
index 0000000..e77ab83
--- /dev/null
+++ b/arch/riscv/include/asm/bitops.h
@@ -0,0 +1,35 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+#ifndef _ASM_BITOPS_H_
+#define _ASM_BITOPS_H_
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ops.h>
+
+#define set_bit(x, y) __set_bit(x, y)
+#define clear_bit(x, y) __clear_bit(x, y)
+#define change_bit(x, y) __change_bit(x, y)
+#define test_and_set_bit(x, y) __test_and_set_bit(x, y)
+#define test_and_clear_bit(x, y) __test_and_clear_bit(x, y)
+#define test_and_change_bit(x, y) __test_and_change_bit(x, y)
+
+#endif /* _ASM_BITOPS_H_ */
diff --git a/arch/riscv/include/asm/bitsperlong.h b/arch/riscv/include/asm/bitsperlong.h
new file mode 100644
index 0000000..4641e7e
--- /dev/null
+++ b/arch/riscv/include/asm/bitsperlong.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_BITSPERLONG_H
+#define __ASM_BITSPERLONG_H
+
+#ifdef __riscv64
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif
+
+#endif /* __ASM_BITSPERLONG_H */
diff --git a/arch/riscv/include/asm/byteorder.h b/arch/riscv/include/asm/byteorder.h
new file mode 100644
index 0000000..994a61a
--- /dev/null
+++ b/arch/riscv/include/asm/byteorder.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_RISCV_BYTEORDER_H
+#define _ASM_RISCV_BYTEORDER_H
+
+#if defined(__RISCVEL__)
+#include <linux/byteorder/little_endian.h>
+#elif defined(__RISCVEB__)
+#include <linux/byteorder/big_endian.h>
+#else
+#error "Unknown endianness"
+#endif
+
+#endif /* _ASM_RISCV_BYTEORDER_H */
diff --git a/arch/riscv/include/asm/common.h b/arch/riscv/include/asm/common.h
new file mode 100644
index 0000000..bc8a17e
--- /dev/null
+++ b/arch/riscv/include/asm/common.h
@@ -0,0 +1,6 @@
+#ifndef ASM_RISCV_COMMON_H
+#define ASM_RISCV_COMMON_H
+
+/* nothing special yet */
+
+#endif /* ASM_RISCV_COMMON_H */
diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h
new file mode 100644
index 0000000..7134fa0
--- /dev/null
+++ b/arch/riscv/include/asm/elf.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_RISCV_ELF_H__
+#define __ASM_RISCV_ELF_H__
+
+#if __SIZEOF_POINTER__ == 8
+#define ELF_CLASS ELFCLASS64
+#define CONFIG_PHYS_ADDR_T_64BIT
+#else
+#define ELF_CLASS ELFCLASS32
+#endif
+
+#endif /* __ASM_RISCV_ELF_H__ */
diff --git a/arch/riscv/include/asm/io.h b/arch/riscv/include/asm/io.h
new file mode 100644
index 0000000..d9aca42
--- /dev/null
+++ b/arch/riscv/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RISCV_IO_H
+#define __ASM_RISCV_IO_H
+
+#include <asm-generic/io.h>
+
+#define IO_SPACE_LIMIT 0
+
+#endif /* __ASM_RISCV_IO_H */
diff --git a/arch/riscv/include/asm/posix_types.h b/arch/riscv/include/asm/posix_types.h
new file mode 100644
index 0000000..22cae62
--- /dev/null
+++ b/arch/riscv/include/asm/posix_types.h
@@ -0,0 +1 @@
+#include <asm-generic/posix_types.h>
diff --git a/arch/riscv/include/asm/sections.h b/arch/riscv/include/asm/sections.h
new file mode 100644
index 0000000..2b8c516
--- /dev/null
+++ b/arch/riscv/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/riscv/include/asm/string.h b/arch/riscv/include/asm/string.h
new file mode 100644
index 0000000..2997587
--- /dev/null
+++ b/arch/riscv/include/asm/string.h
@@ -0,0 +1 @@
+/* dummy */
diff --git a/arch/riscv/include/asm/swab.h b/arch/riscv/include/asm/swab.h
new file mode 100644
index 0000000..60a9012
--- /dev/null
+++ b/arch/riscv/include/asm/swab.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+/* nothing. use generic functions */
+
+#endif /* _ASM_SWAB_H */
diff --git a/arch/riscv/include/asm/types.h b/arch/riscv/include/asm/types.h
new file mode 100644
index 0000000..ba386ab
--- /dev/null
+++ b/arch/riscv/include/asm/types.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_RISCV_TYPES_H
+#define __ASM_RISCV_TYPES_H
+
+#ifdef __riscv64
+/*
+ * This is used in dlmalloc. On RISCV64 we need it to be 64 bit
+ */
+#define INTERNAL_SIZE_T unsigned long
+
+/*
+ * This is a Kconfig variable in the Kernel, but we want to detect
+ * this during compile time, so we set it here.
+ */
+#define CONFIG_PHYS_ADDR_T_64BIT
+
+#endif
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#include <asm/bitsperlong.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_RISCV_TYPES_H */
diff --git a/arch/riscv/include/asm/unaligned.h b/arch/riscv/include/asm/unaligned.h
new file mode 100644
index 0000000..aaebc06
--- /dev/null
+++ b/arch/riscv/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_RISCV_UNALIGNED_H
+#define _ASM_RISCV_UNALIGNED_H
+
+/*
+ * FIXME: this file is copy-n-pasted from sandbox's unaligned.h
+ */
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+#else
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* _ASM_RISCV_UNALIGNED_H */
diff --git a/arch/riscv/lib/.gitignore b/arch/riscv/lib/.gitignore
new file mode 100644
index 0000000..d116578
--- /dev/null
+++ b/arch/riscv/lib/.gitignore
@@ -0,0 +1 @@
+barebox.lds
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
new file mode 100644
index 0000000..07a1b2b
--- /dev/null
+++ b/arch/riscv/lib/Makefile
@@ -0,0 +1,3 @@
+extra-$(CONFIG_GENERIC_LINKER_SCRIPT) += barebox.lds
+
+obj-$(CONFIG_BUILTIN_DTB) += dtb.o
diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c
new file mode 100644
index 0000000..22f382b
--- /dev/null
+++ b/arch/riscv/lib/asm-offsets.c
@@ -0,0 +1,12 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ */
+
+#include <linux/kbuild.h>
+
+int main(void)
+{
+ return 0;
+}
diff --git a/arch/riscv/lib/barebox.lds.S b/arch/riscv/lib/barebox.lds.S
new file mode 100644
index 0000000..831c3e4
--- /dev/null
+++ b/arch/riscv/lib/barebox.lds.S
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm-generic/barebox.lds.h>
+
+OUTPUT_ARCH(riscv)
+ENTRY(_start)
+SECTIONS
+{
+ . = TEXT_BASE;
+
+ . = ALIGN(8);
+ .text :
+ {
+ _start = .;
+ *(.text_entry*)
+ _stext = .;
+ _text = .;
+ __bare_init_start = .;
+ *(.text_bare_init*)
+ __bare_init_end = .;
+ *(.text*)
+ }
+ BAREBOX_BARE_INIT_SIZE
+
+ PRE_IMAGE
+
+ . = ALIGN(8);
+ .rodata : { *(.rodata*) }
+
+ _etext = .; /* End of text and rodata section */
+ _sdata = .;
+
+ . = ALIGN(8);
+ .data : { *(.data*) }
+
+ .barebox_imd : { BAREBOX_IMD }
+
+ . = ALIGN(8);
+ .got : { *(.got*) }
+
+ . = .;
+ __barebox_cmd_start = .;
+ .barebox_cmd : { BAREBOX_CMDS }
+ __barebox_cmd_end = .;
+
+ __barebox_magicvar_start = .;
+ .barebox_magicvar : { BAREBOX_MAGICVARS }
+ __barebox_magicvar_end = .;
+
+ __barebox_initcalls_start = .;
+ .barebox_initcalls : { INITCALLS }
+ __barebox_initcalls_end = .;
+
+ __barebox_exitcalls_start = .;
+ .barebox_exitcalls : { EXITCALLS }
+ __barebox_exitcalls_end = .;
+
+ __usymtab_start = .;
+ __usymtab : { BAREBOX_SYMS }
+ __usymtab_end = .;
+
+ .oftables : { BAREBOX_CLK_TABLE() }
+
+ .dtb : { BAREBOX_DTB() }
+
+ _edata = .;
+ . = ALIGN(8);
+ __bss_start = .;
+ .bss : { *(.bss*) }
+ __bss_stop = .;
+ _end = .;
+}
diff --git a/arch/riscv/lib/dtb.c b/arch/riscv/lib/dtb.c
new file mode 100644
index 0000000..09f519d
--- /dev/null
+++ b/arch/riscv/lib/dtb.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <of.h>
+
+extern char __dtb_start[];
+
+static int of_riscv_init(void)
+{
+ struct device_node *root;
+
+ root = of_get_root_node();
+ if (root)
+ return 0;
+
+ root = of_unflatten_dtb(__dtb_start);
+ if (!IS_ERR(root)) {
+ pr_debug("using internal DTB\n");
+ of_set_root_node(root);
+ if (IS_ENABLED(CONFIG_OFDEVICE))
+ of_probe();
+ }
+
+ return 0;
+}
+core_initcall(of_riscv_init);
diff --git a/arch/riscv/mach-sifive/Kconfig b/arch/riscv/mach-sifive/Kconfig
new file mode 100644
index 0000000..11251dd
--- /dev/null
+++ b/arch/riscv/mach-sifive/Kconfig
@@ -0,0 +1,16 @@
+if MACH_SIFIVE
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x00001000
+
+choice
+ prompt "Board type"
+
+config BOARD_QEMU_SIFIVE
+ bool "qemu sifive"
+ select HAS_DEBUG_LL
+
+endchoice
+
+endif
diff --git a/arch/riscv/mach-sifive/Makefile b/arch/riscv/mach-sifive/Makefile
new file mode 100644
index 0000000..d9c51e7
--- /dev/null
+++ b/arch/riscv/mach-sifive/Makefile
@@ -0,0 +1,3 @@
+# just to build a built-in.o. Otherwise compilation fails when no o-files is
+# created.
+obj- += dummy.o
diff --git a/arch/riscv/mach-sifive/include/mach/debug_ll.h b/arch/riscv/mach-sifive/include/mach/debug_ll.h
new file mode 100644
index 0000000..b2dbfc2
--- /dev/null
+++ b/arch/riscv/mach-sifive/include/mach/debug_ll.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_SIFIVE_DEBUG_LL__
+#define __MACH_SIFIVE_DEBUG_LL__
+
+/** @file
+ * This File contains declaration for early output support
+ */
+
+#include <linux/kconfig.h>
+#include <asm/io.h>
+
+#define UART_BASE 0x40002000
+#define R_DATA (0 << 2)
+#define R_RXCNT (2 << 2)
+
+static inline void PUTC_LL(int ch)
+{
+ if (IS_ENABLED(CONFIG_DEBUG_LL))
+ __raw_writeb(ch, (u8 *)UART_BASE + R_DATA);
+}
+
+#endif /* __MACH_SIFIVE_DEBUG_LL__ */
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d0a62bd..0824b04 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OFTREE
config OFTREE_MEM_GENERIC
depends on OFTREE
- depends on PPC || ARM || ARCH_EFI || OPENRISC || SANDBOX
+ depends on PPC || ARM || ARCH_EFI || OPENRISC || SANDBOX || RISCV
def_bool y
config DTC
--
2.10.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread