From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC v3 0/2] add initial RISC-V architecture support
Date: Mon, 12 Dec 2016 04:01:44 +0300 [thread overview]
Message-ID: <20161212010146.18667-1-antonynpavlov@gmail.com> (raw)
This patchseries adds initial RISC-V architecture support for barebox.
See Documentation/boards/riscv.rst for instructions.
You can obtain this patchseries from github:
$ git clone -b 20161212.riscv https://github.com/frantony/barebox
Changes since RFC v2 (20161113) (http://lists.infradead.org/pipermail/barebox/2016-November/028533.html):
* add RV32 support.
Changes since RFC v1 (20161013) (http://lists.infradead.org/pipermail/barebox/2016-October/028309.html):
* drop spike pk support;
* add qemu-sifive board support;
* add Documentation/boards/riscv.rst;
* fix guard macro names.
TODOs:
* add nmon for RISC-V;
* run barebox on a real FPGA board.
Antony Pavlov (2):
serial: add driver for SiFive UART
Add initial RISC-V architecture support
Documentation/boards/riscv.rst | 93 +++++++++++++++++++++
arch/riscv/Kconfig | 76 +++++++++++++++++
arch/riscv/Makefile | 51 ++++++++++++
arch/riscv/boards/qemu-sifive/.gitignore | 1 +
arch/riscv/boards/qemu-sifive/Makefile | 1 +
arch/riscv/boards/qemu-sifive/board.c | 28 +++++++
arch/riscv/boot/Makefile | 2 +
arch/riscv/boot/main_entry.c | 40 +++++++++
arch/riscv/boot/start.S | 44 ++++++++++
arch/riscv/configs/qemu-sifive-e300_defconfig | 76 +++++++++++++++++
arch/riscv/configs/qemu-sifive-u500_defconfig | 75 +++++++++++++++++
arch/riscv/dts/.gitignore | 1 +
arch/riscv/dts/Makefile | 9 ++
arch/riscv/dts/qemu-sifive.dts | 19 +++++
arch/riscv/dts/skeleton.dtsi | 13 +++
arch/riscv/include/asm/barebox.h | 1 +
arch/riscv/include/asm/bitops.h | 35 ++++++++
arch/riscv/include/asm/bitsperlong.h | 10 +++
arch/riscv/include/asm/byteorder.h | 12 +++
arch/riscv/include/asm/common.h | 6 ++
arch/riscv/include/asm/elf.h | 11 +++
arch/riscv/include/asm/io.h | 8 ++
arch/riscv/include/asm/posix_types.h | 1 +
arch/riscv/include/asm/sections.h | 1 +
arch/riscv/include/asm/string.h | 1 +
arch/riscv/include/asm/swab.h | 6 ++
arch/riscv/include/asm/types.h | 60 ++++++++++++++
arch/riscv/include/asm/unaligned.h | 19 +++++
arch/riscv/lib/.gitignore | 1 +
arch/riscv/lib/Makefile | 7 ++
arch/riscv/lib/ashldi3.c | 28 +++++++
arch/riscv/lib/ashrdi3.c | 30 +++++++
arch/riscv/lib/asm-offsets.c | 12 +++
arch/riscv/lib/barebox.lds.S | 87 ++++++++++++++++++++
arch/riscv/lib/dtb.c | 41 ++++++++++
arch/riscv/lib/libgcc.h | 29 +++++++
arch/riscv/lib/lshrdi3.c | 28 +++++++
arch/riscv/mach-sifive/Kconfig | 16 ++++
arch/riscv/mach-sifive/Makefile | 3 +
arch/riscv/mach-sifive/include/mach/debug_ll.h | 38 +++++++++
drivers/of/Kconfig | 2 +-
drivers/serial/Kconfig | 3 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_sifive.c | 109 +++++++++++++++++++++++++
44 files changed, 1134 insertions(+), 1 deletion(-)
create mode 100644 Documentation/boards/riscv.rst
create mode 100644 arch/riscv/Kconfig
create mode 100644 arch/riscv/Makefile
create mode 100644 arch/riscv/boards/qemu-sifive/.gitignore
create mode 100644 arch/riscv/boards/qemu-sifive/Makefile
create mode 100644 arch/riscv/boards/qemu-sifive/board.c
create mode 100644 arch/riscv/boot/Makefile
create mode 100644 arch/riscv/boot/main_entry.c
create mode 100644 arch/riscv/boot/start.S
create mode 100644 arch/riscv/configs/qemu-sifive-e300_defconfig
create mode 100644 arch/riscv/configs/qemu-sifive-u500_defconfig
create mode 100644 arch/riscv/dts/.gitignore
create mode 100644 arch/riscv/dts/Makefile
create mode 100644 arch/riscv/dts/qemu-sifive.dts
create mode 100644 arch/riscv/dts/skeleton.dtsi
create mode 100644 arch/riscv/include/asm/barebox.h
create mode 100644 arch/riscv/include/asm/bitops.h
create mode 100644 arch/riscv/include/asm/bitsperlong.h
create mode 100644 arch/riscv/include/asm/byteorder.h
create mode 100644 arch/riscv/include/asm/common.h
create mode 100644 arch/riscv/include/asm/elf.h
create mode 100644 arch/riscv/include/asm/io.h
create mode 100644 arch/riscv/include/asm/posix_types.h
create mode 100644 arch/riscv/include/asm/sections.h
create mode 100644 arch/riscv/include/asm/string.h
create mode 100644 arch/riscv/include/asm/swab.h
create mode 100644 arch/riscv/include/asm/types.h
create mode 100644 arch/riscv/include/asm/unaligned.h
create mode 100644 arch/riscv/lib/.gitignore
create mode 100644 arch/riscv/lib/Makefile
create mode 100644 arch/riscv/lib/ashldi3.c
create mode 100644 arch/riscv/lib/ashrdi3.c
create mode 100644 arch/riscv/lib/asm-offsets.c
create mode 100644 arch/riscv/lib/barebox.lds.S
create mode 100644 arch/riscv/lib/dtb.c
create mode 100644 arch/riscv/lib/libgcc.h
create mode 100644 arch/riscv/lib/lshrdi3.c
create mode 100644 arch/riscv/mach-sifive/Kconfig
create mode 100644 arch/riscv/mach-sifive/Makefile
create mode 100644 arch/riscv/mach-sifive/include/mach/debug_ll.h
create mode 100644 drivers/serial/serial_sifive.c
--
2.10.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2016-12-12 1:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-12 1:01 Antony Pavlov [this message]
2016-12-12 1:01 ` [RFC v3 1/2] serial: add driver for SiFive UART Antony Pavlov
2016-12-12 1:01 ` [RFC v3 2/2] Add initial RISC-V architecture support Antony Pavlov
2016-12-13 17:02 ` Andrey Korolyov
2016-12-13 20:48 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161212010146.18667-1-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox