mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] spi: mvebu: add LSB support
Date: Mon, 12 Dec 2016 06:45:50 +0100	[thread overview]
Message-ID: <20161212054550.tvypgzxcsthloozd@pengutronix.de> (raw)
In-Reply-To: <20161208105226.27858-1-u.kleine-koenig@pengutronix.de>

On Thu, Dec 08, 2016 at 11:52:25AM +0100, Uwe Kleine-König wrote:
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  drivers/spi/mvebu_spi.c | 28 ++++++++++++++++++++++++----
>  1 file changed, 24 insertions(+), 4 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/spi/mvebu_spi.c b/drivers/spi/mvebu_spi.c
> index 6921cb8cd7db..c5d8732e4f84 100644
> --- a/drivers/spi/mvebu_spi.c
> +++ b/drivers/spi/mvebu_spi.c
> @@ -31,8 +31,13 @@
>  #define  IF_READ_READY		BIT(1)
>  #define  IF_CS_ENABLE		BIT(0)
>  #define SPI_IF_CONFIG		0x04
> +
> +#define  IF_RXLSBF		BIT(14)
> +#define  IF_TXLSBF		BIT(13)
> +
>  #define  IF_CLK_DIV(x)		((x) << 11)
>  #define  IF_CLK_DIV_MASK	(0x7 << 11)
> +
>  #define  IF_FAST_READ		BIT(10)
>  #define  IF_ADDRESS_LEN_4BYTE	(3 << 8)
>  #define  IF_ADDRESS_LEN_3BYTE	(2 << 8)
> @@ -192,6 +197,8 @@ static int dove_spi_set_baudrate(struct mvebu_spi *p, u32 speed)
>  
>  static int mvebu_spi_set_mode(struct mvebu_spi *p, u8 mode)
>  {
> +	u32 val;
> +
>  	/*
>  	 * From public datasheets of Orion SoCs, it is unclear
>  	 * if the SPI controller supports setting CPOL/CPHA.
> @@ -202,12 +209,19 @@ static int mvebu_spi_set_mode(struct mvebu_spi *p, u8 mode)
>  	 * other mode than SPI_MODE0.
>  	 */
>  
> -	if ((mode & (SPI_CPOL|SPI_CPHA)) == SPI_MODE_0)
> -		return 0;
> +	if ((mode & (SPI_CPOL|SPI_CPHA)) != SPI_MODE_0) {
> +		pr_err("%s: unsupported SPI mode %02x\n", __func__, mode);
> +		return -EINVAL;
> +	}
>  
> -	pr_err("%s: unsupported SPI mode %02x\n", __func__, mode);
> +	val = readl(p->base + SPI_IF_CONFIG);
> +	if (mode & SPI_LSB_FIRST)
> +		val |= IF_RXLSBF | IF_TXLSBF;
> +	else
> +		val &= ~(IF_RXLSBF | IF_TXLSBF);
> +	writel(val, p->base + SPI_IF_CONFIG);
>  
> -	return -EINVAL;
> +	return 0;
>  }
>  
>  static int mvebu_spi_setup(struct spi_device *spi)
> @@ -293,6 +307,12 @@ static int mvebu_spi_transfer(struct spi_device *spi, struct spi_message *msg)
>  	int ret;
>  	struct mvebu_spi *priv = priv_from_spi_device(spi);
>  
> +	ret = mvebu_spi_set_mode(priv, spi->mode);
> +	if (ret) {
> +		dev_err(&spi->dev, "Failed to set mode (0x%x)\n", (unsigned)spi->mode);
> +		return ret;
> +	}
> +
>  	ret = mvebu_spi_set_cs(priv, spi->chip_select, spi->mode, true);
>  	if (ret)
>  		return ret;
> -- 
> 2.10.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2016-12-12  5:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-08 10:52 Uwe Kleine-König
2016-12-08 10:52 ` [PATCH 2/2] spi: mvebu: improve error reporting Uwe Kleine-König
2016-12-12  5:45 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161212054550.tvypgzxcsthloozd@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox