From: Stefan Lengfeld <s.lengfeld@phytec.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses
Date: Tue, 13 Dec 2016 10:56:21 +0100 [thread overview]
Message-ID: <20161213095621.GC3694@lws-christ> (raw)
In-Reply-To: <1481565788-9115-5-git-send-email-andrew.smirnov@gmail.com>
Hi Andrey,
On Mon, Dec 12, 2016 at 10:02:51AM -0800, Andrey Smirnov wrote:
> i.MX SoC variants like Vybrid have more than one built-in Ethernet
> interface and as a consequence support storing more than one MAC address
> in OCOTP module. Add code to create multiple 'mac_addr<n>' parameters as
> well as 'mac_addr' as an "alias" to 'mac_addr0' for backwards
> compatibility.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> arch/arm/mach-imx/ocotp.c | 65 +++++++++++++++++++++++++++++++++++------------
> 1 file changed, 49 insertions(+), 16 deletions(-)
Acked-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Mit freundlichen Grüßen / Kind regards,
Stefan Lengfeld
>
> diff --git a/arch/arm/mach-imx/ocotp.c b/arch/arm/mach-imx/ocotp.c
> index f549c94..55bbbb7 100644
> --- a/arch/arm/mach-imx/ocotp.c
> +++ b/arch/arm/mach-imx/ocotp.c
> @@ -69,12 +69,22 @@
> /* Other definitions */
> #define IMX6_OTP_DATA_ERROR_VAL 0xBADABADA
> #define DEF_RELAX 20
> -#define MAC_OFFSET (0x22 * 4)
> +#define MAC_OFFSET_0 (0x22 * 4)
> +#define MAC_OFFSET_1 (0x24 * 4)
> +#define MAX_MAC_OFFSETS 2
> #define MAC_BYTES 8
>
> struct imx_ocotp_data {
> int num_regs;
> u32 (*addr_to_offset)(u32 addr);
> + u8 mac_offsets[MAX_MAC_OFFSETS];
> + u8 mac_offsets_num;
> +};
> +
> +struct ocotp_priv_ethaddr {
> + char value[MAC_BYTES];
> + struct regmap *map;
> + u8 offset;
> };
>
> struct ocotp_priv {
> @@ -84,9 +94,10 @@ struct ocotp_priv {
> struct device_d dev;
> int permanent_write_enable;
> int sense_enable;
> - char ethaddr[MAC_BYTES];
> + struct ocotp_priv_ethaddr ethaddr[MAX_MAC_OFFSETS];
> struct regmap_config map_config;
> const struct imx_ocotp_data *data;
> + int mac_offset_idx;
> };
>
> static struct ocotp_priv *imx_ocotp;
> @@ -408,31 +419,28 @@ static void memreverse(void *dest, const void *src, size_t n)
>
> static int imx_ocotp_get_mac(struct param_d *param, void *priv)
> {
> - struct ocotp_priv *ocotp_priv = priv;
> char buf[MAC_BYTES];
> int ret;
> + struct ocotp_priv_ethaddr *ethaddr = priv;
>
> - ret = regmap_bulk_read(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
> + ret = regmap_bulk_read(ethaddr->map, ethaddr->offset,
> + buf, MAC_BYTES);
> if (ret < 0)
> return ret;
>
> - memreverse(ocotp_priv->ethaddr, buf, MAC_BYTES);
> + memreverse(ethaddr->value, buf, MAC_BYTES);
> return 0;
> }
>
> static int imx_ocotp_set_mac(struct param_d *param, void *priv)
> {
> - struct ocotp_priv *ocotp_priv = priv;
> char buf[MAC_BYTES];
> - int ret;
> + struct ocotp_priv_ethaddr *ethaddr = priv;
>
> - memreverse(buf, ocotp_priv->ethaddr, MAC_BYTES);
> -
> - ret = regmap_bulk_write(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
> - if (ret < 0)
> - return ret;
> + memreverse(buf, ethaddr->value, MAC_BYTES);
>
> - return 0;
> + return regmap_bulk_write(ethaddr->map, ethaddr->offset,
> + buf, MAC_BYTES);
> }
>
> static struct regmap_bus imx_ocotp_regmap_bus = {
> @@ -491,9 +499,28 @@ static int imx_ocotp_probe(struct device_d *dev)
> NULL, NULL, &priv->permanent_write_enable, NULL);
> }
>
> - if (IS_ENABLED(CONFIG_NET))
> - dev_add_param_mac(&(priv->dev), "mac_addr", imx_ocotp_set_mac,
> - imx_ocotp_get_mac, priv->ethaddr, priv);
> + if (IS_ENABLED(CONFIG_NET)) {
> + int i;
> + struct ocotp_priv_ethaddr *ethaddr;
> +
> + for (i = 0; i < priv->data->mac_offsets_num; i++) {
> + ethaddr = &priv->ethaddr[i];
> + ethaddr->map = priv->map;
> + ethaddr->offset = priv->data->mac_offsets[i];
> +
> + dev_add_param_mac(&priv->dev, xasprintf("mac_addr%d", i),
> + imx_ocotp_set_mac, imx_ocotp_get_mac,
> + ethaddr->value, ethaddr);
> + }
> +
> + /*
> + * Alias to mac_addr0 for backwards compatibility
> + */
> + ethaddr = &priv->ethaddr[0];
> + dev_add_param_mac(&priv->dev, "mac_addr",
> + imx_ocotp_set_mac, imx_ocotp_get_mac,
> + ethaddr->value, ethaddr);
> + }
>
> dev_add_param_bool(&(priv->dev), "sense_enable", NULL, NULL, &priv->sense_enable, priv);
>
> @@ -532,16 +559,22 @@ static u32 vf610_addr_to_offset(u32 addr)
> static struct imx_ocotp_data imx6q_ocotp_data = {
> .num_regs = 512,
> .addr_to_offset = imx6q_addr_to_offset,
> + .mac_offsets_num = 1,
> + .mac_offsets = { MAC_OFFSET_0 },
> };
>
> static struct imx_ocotp_data imx6sl_ocotp_data = {
> .num_regs = 256,
> .addr_to_offset = imx6sl_addr_to_offset,
> + .mac_offsets_num = 1,
> + .mac_offsets = { MAC_OFFSET_0 },
> };
>
> static struct imx_ocotp_data vf610_ocotp_data = {
> .num_regs = 512,
> .addr_to_offset = vf610_addr_to_offset,
> + .mac_offsets_num = 2,
> + .mac_offsets = { MAC_OFFSET_0, MAC_OFFSET_1 },
> };
>
> static __maybe_unused struct of_device_id imx_ocotp_dt_ids[] = {
> --
> 2.5.5
>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-12-13 9:56 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-12 18:02 [PATCH v2 00/21] Vybrid related patches Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 01/21] i.MX: esdhc: Enable host->clk during initialization Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 02/21] i.MX: ocotp: Move memory reversing into a subroutine Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic Andrey Smirnov
2017-01-09 11:18 ` Sascha Hauer
2017-01-09 11:28 ` Sascha Hauer
2017-01-10 15:02 ` Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 04/21] i.MX: ocotp: Add provisions for storing multiple MAC addresses Andrey Smirnov
2016-12-13 9:56 ` Stefan Lengfeld [this message]
2016-12-12 18:02 ` [PATCH 05/21] i.MX: ocotp: Initialize OCOTP as early as possible Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 06/21] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 07/21] i.MX: ocotp: Add imx_ocotp_sense_enable() Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 08/21] i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 09/21] i.MX: Add fusemap for VF610 Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 10/21] i.MX: vf610: Ramp CPU clock to maximum frequency Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 11/21] i.MX: iomuxv3: Add low-level pad code to headers Andrey Smirnov
2016-12-12 18:02 ` [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values Andrey Smirnov
2017-01-09 12:00 ` Sascha Hauer
2017-01-10 15:01 ` Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 13/21] i.MX: iomuxv3: Add low-level pad configuration routine Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 14/21] i.MX6: sabresd: Remove magic numbers in setup_uart Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 15/21] i.MX: iomuxv3: Use helper functions in iomux-v3.h Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 16/21] i.MX: vf610: Add low-level pin configuration helper Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 17/21] i.MX: iomux-vf610: Add missing pad definitions Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 18/21] i.MX: imx-usb-phy: Add VF610 OF compatiblity string Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid Andrey Smirnov
2017-01-09 12:03 ` Sascha Hauer
2017-01-10 15:02 ` Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 20/21] i.MX: imx-usb-misc: Add Vybrid support Andrey Smirnov
2016-12-12 18:03 ` [PATCH v2 21/21] i.MX: vf610-twr: Remove MSCM setup code Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161213095621.GC3694@lws-christ \
--to=s.lengfeld@phytec.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox