* No release for December
@ 2016-12-29 9:13 Sascha Hauer
2016-12-30 8:30 ` gianluca
0 siblings, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2016-12-29 9:13 UTC (permalink / raw)
To: Barebox List
Hi All,
As you probably already have noticed I was very quiet the last month.
The reason was that I was on parental leave for december. Apart from
babysitting we planned to finish the now three years lasting renovation
of our houses ground floor. The good news is that we finally finished
this task and could move from the first level down to the ground floor.
Finally \o/.
I totally underestimated how busy I would be and how demanding new born
childs can be. I originally wanted to continue reviewing patches and
make a release just as usual, but as it seems this didn't work out.
I decided to skip the december release as december is almost over
already now. I'll continue with reviewing patches in January and do a
release then. Your patches are not lost. Until then I wish you a good
start to the new year.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: No release for December
2016-12-29 9:13 No release for December Sascha Hauer
@ 2016-12-30 8:30 ` gianluca
2017-01-09 8:32 ` Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: gianluca @ 2016-12-30 8:30 UTC (permalink / raw)
To: barebox
On 12/29/2016 10:13 AM, Sascha Hauer wrote:
> Hi All,
>
> As you probably already have noticed I was very quiet the last month.
> The reason was that I was on parental leave for december. Apart from
> babysitting we planned to finish the now three years lasting renovation
> of our houses ground floor. The good news is that we finally finished
> this task and could move from the first level down to the ground floor.
> Finally \o/.
> I totally underestimated how busy I would be and how demanding new born
> childs can be. I originally wanted to continue reviewing patches and
> make a release just as usual, but as it seems this didn't work out.
> I decided to skip the december release as december is almost over
> already now. I'll continue with reviewing patches in January and do a
> release then. Your patches are not lost. Until then I wish you a good
> start to the new year.
>
Welcome in parental's world!!!
P.S.: I can give you a hint: if you are planning to have another kid,
remember that two is not the double of one. Taliking about kids, two is
the 2 powered at 2 or if you prefer in binary form it 10 times 01. O__o
Happy new year 2017 and enjoy those _VERY_QUICK_ growing seasons.
Gianluca
--
Eurek s.r.l. |
Electronic Engineering | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377 | Fax: +39-(0)542-609212
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: No release for December
2016-12-30 8:30 ` gianluca
@ 2017-01-09 8:32 ` Sascha Hauer
2017-01-09 11:35 ` gianluca
0 siblings, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2017-01-09 8:32 UTC (permalink / raw)
To: gianluca; +Cc: barebox
On Fri, Dec 30, 2016 at 09:30:15AM +0100, gianluca wrote:
> On 12/29/2016 10:13 AM, Sascha Hauer wrote:
> > Hi All,
> >
> > As you probably already have noticed I was very quiet the last month.
> > The reason was that I was on parental leave for december. Apart from
> > babysitting we planned to finish the now three years lasting renovation
> > of our houses ground floor. The good news is that we finally finished
> > this task and could move from the first level down to the ground floor.
> > Finally \o/.
> > I totally underestimated how busy I would be and how demanding new born
> > childs can be. I originally wanted to continue reviewing patches and
> > make a release just as usual, but as it seems this didn't work out.
> > I decided to skip the december release as december is almost over
> > already now. I'll continue with reviewing patches in January and do a
> > release then. Your patches are not lost. Until then I wish you a good
> > start to the new year.
> >
>
> Welcome in parental's world!!!
>
> P.S.: I can give you a hint: if you are planning to have another kid,
> remember that two is not the double of one. Taliking about kids, two is the
> 2 powered at 2 or if you prefer in binary form it 10 times 01. O__o
I was told that the change from 0 to 1 kid is much harder than the
change from 1 to 2 kids. I tend to believe this, but I'll for sure
remember this mail if I was wrong ;)
>
> Happy new year 2017 and enjoy those _VERY_QUICK_ growing seasons.
Indeed it's amazing how fast they grow. I am very much enjoying it.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: No release for December
2017-01-09 8:32 ` Sascha Hauer
@ 2017-01-09 11:35 ` gianluca
0 siblings, 0 replies; 4+ messages in thread
From: gianluca @ 2017-01-09 11:35 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 01/09/2017 09:32 AM, Sascha Hauer wrote:
> On Fri, Dec 30, 2016 at 09:30:15AM +0100, gianluca wrote:
>> On 12/29/2016 10:13 AM, Sascha Hauer wrote:
>>> Hi All,
>>>
>>> As you probably already have noticed I was very quiet the last month.
>>> The reason was that I was on parental leave for december. Apart from
>>> babysitting we planned to finish the now three years lasting renovation
>>> of our houses ground floor. The good news is that we finally finished
>>> this task and could move from the first level down to the ground floor.
>>> Finally \o/.
>>> I totally underestimated how busy I would be and how demanding new born
>>> childs can be. I originally wanted to continue reviewing patches and
>>> make a release just as usual, but as it seems this didn't work out.
>>> I decided to skip the december release as december is almost over
>>> already now. I'll continue with reviewing patches in January and do a
>>> release then. Your patches are not lost. Until then I wish you a good
>>> start to the new year.
>>>
>>
>> Welcome in parental's world!!!
>>
>> P.S.: I can give you a hint: if you are planning to have another kid,
>> remember that two is not the double of one. Taliking about kids, two is the
>> 2 powered at 2 or if you prefer in binary form it 10 times 01. O__o
>
> I was told that the change from 0 to 1 kid is much harder than the
> change from 1 to 2 kids. I tend to believe this, but I'll for sure
> remember this mail if I was wrong ;)
>
;-)
From my POV my two daughters are 22 months between them. I was changing
nappies from 2010 up to 2014 for both. O__o
No mention when they start talking or walking... When you will have two
of them it will the hardest thing of your life.
Anyway good luck and have an happy and joyful year 2017!!!
>>
>> Happy new year 2017 and enjoy those _VERY_QUICK_ growing seasons.
>
> Indeed it's amazing how fast they grow. I am very much enjoying it.
>
Agree with that.
Regards,
--
Eurek s.r.l. |
Electronic Engineering | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377 | Fax: +39-(0)542-609212
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-01-09 11:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-29 9:13 No release for December Sascha Hauer
2016-12-30 8:30 ` gianluca
2017-01-09 8:32 ` Sascha Hauer
2017-01-09 11:35 ` gianluca
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox