From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 13/20] usb: ohci-at91: Check result of clk_enable()
Date: Wed, 8 Mar 2017 14:09:02 -0800 [thread overview]
Message-ID: <20170308220909.4560-14-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170308220909.4560-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/usb/host/ohci-at91.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index cd7b321..5f74526 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -34,10 +34,23 @@ struct ohci_at91_priv {
struct ohci_regs __iomem *regs;
};
-static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+static int at91_start_clock(struct ohci_at91_priv *ohci_at91)
{
- clk_enable(ohci_at91->iclk);
- clk_enable(ohci_at91->fclk);
+ int ret;
+
+ ret = clk_enable(ohci_at91->iclk);
+ if (ret < 0) {
+ dev_err(ohci_at91->dev, "Failed to enable 'iclk'\n");
+ return ret;
+ }
+
+ ret = clk_enable(ohci_at91->fclk);
+ if (ret < 0) {
+ dev_err(ohci_at91->dev, "Failed to enable 'fclk'\n");
+ return ret;
+ }
+
+ return 0;
}
static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
@@ -48,6 +61,7 @@ static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
static int at91_ohci_probe(struct device_d *dev)
{
+ int ret;
struct resource *io;
struct ohci_at91_priv *ohci_at91 = xzalloc(sizeof(*ohci_at91));
@@ -76,7 +90,9 @@ static int at91_ohci_probe(struct device_d *dev)
/*
* Start the USB clocks.
*/
- at91_start_clock(ohci_at91);
+ ret = at91_start_clock(ohci_at91);
+ if (ret < 0)
+ return ret;
/*
* The USB host controller must remain in reset.
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-03-08 22:10 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-08 22:08 [PATCH 00/20] AT91, at91sam9x5ek updates (part I/III) Andrey Smirnov
2017-03-08 22:08 ` [PATCH 01/20] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-08 22:08 ` [PATCH 02/20] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 03/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 04/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_state() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 05/20] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-08 22:08 ` [PATCH 06/20] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-08 22:08 ` [PATCH 07/20] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-08 22:08 ` [PATCH 08/20] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-09 10:54 ` Sascha Hauer
2017-03-08 22:08 ` [PATCH 09/20] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-08 22:08 ` [PATCH 10/20] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 11/20] usb: ohci-at91: " Andrey Smirnov
2017-03-08 22:09 ` [PATCH 12/20] usb: ohci-at91: Convert global variables to private data Andrey Smirnov
2017-03-08 22:09 ` Andrey Smirnov [this message]
2017-03-08 22:09 ` [PATCH 14/20] usb: ehci-atmel: Check result of clk_enable() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 15/20] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-08 22:09 ` [PATCH 16/20] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-08 22:09 ` [PATCH 17/20] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 18/20] spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov
2017-03-08 22:09 ` [PATCH 19/20] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-08 22:09 ` [PATCH 20/20] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-09 7:19 ` [PATCH 00/20] AT91, at91sam9x5ek updates (part I/III) Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170308220909.4560-14-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox