mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 07/11] w1-gpio: Add DT support
Date: Tue, 14 Mar 2017 08:52:18 -0700	[thread overview]
Message-ID: <20170314155222.11657-8-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170314155222.11657-1-andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/w1/masters/w1-gpio.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 946e9d3..916027e 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -16,6 +16,7 @@
 #include <driver.h>
 #include <linux/w1-gpio.h>
 #include <gpio.h>
+#include <of_gpio.h>
 
 #include "../w1.h"
 
@@ -43,12 +44,58 @@ static u8 w1_gpio_read_bit(struct w1_bus *bus)
 	return gpio_get_value(pdata->pin) ? 1 : 0;
 }
 
+static int w1_gpio_probe_dt(struct device_d *dev)
+{
+	struct w1_gpio_platform_data *pdata;
+	struct device_node *np = dev->device_node;
+	int gpio;
+
+	if (dev->platform_data)
+		return 0;
+
+	pdata = xzalloc(sizeof(*pdata));
+
+	if (of_get_property(np, "linux,open-drain", NULL))
+		pdata->is_open_drain = 1;
+
+	gpio = of_get_gpio(np, 0);
+	if (!gpio_is_valid(gpio)) {
+		if (gpio != -EPROBE_DEFER)
+			dev_err(dev,
+				"Failed to parse gpio property for data pin (%d)\n",
+				gpio);
+
+		goto free_pdata;
+	}
+	pdata->pin = gpio;
+
+	gpio = of_get_gpio(np, 1);
+	if (gpio == -EPROBE_DEFER)
+		goto free_pdata;
+
+	/* ignore other errors as the pullup gpio is optional */
+	pdata->ext_pullup_enable_pin = gpio;
+
+	dev->platform_data = pdata;
+	return 0;
+
+free_pdata:
+	free(pdata);
+	return gpio;
+}
+
 static int __init w1_gpio_probe(struct device_d *dev)
 {
 	struct w1_bus *master;
 	struct w1_gpio_platform_data *pdata;
 	int err;
 
+	if (IS_ENABLED(CONFIG_OFDEVICE)) {
+		err = w1_gpio_probe_dt(dev);
+		if (err < 0)
+			return err;
+	}
+
 	pdata = dev->platform_data;
 
 	if (!pdata)
@@ -104,8 +151,14 @@ static int __init w1_gpio_probe(struct device_d *dev)
 	return err;
 }
 
+static __maybe_unused const struct of_device_id w1_gpio_dt_ids[] = {
+	{ .compatible = "w1-gpio" },
+	{}
+};
+
 static struct driver_d w1_gpio_driver = {
 	.name	= "w1-gpio",
 	.probe	= w1_gpio_probe,
+	.of_compatible = DRV_OF_COMPAT(w1_gpio_dt_ids),
 };
 device_platform_driver(w1_gpio_driver);
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-03-14 15:53 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-14 15:52 [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Andrey Smirnov
2017-03-14 15:52 ` [PATCH 01/11] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-15 20:33   ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 02/11] serial: atmel: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 03/11] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-14 15:52 ` [PATCH 04/11] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-14 15:52 ` [PATCH 05/11] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 06/11] spi: atmel_spi: " Andrey Smirnov
2017-03-15 20:54   ` Sam Ravnborg
2017-03-14 15:52 ` Andrey Smirnov [this message]
2017-03-14 15:52 ` [PATCH 08/11] usb: ohci-at91: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 09/11] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-14 15:52 ` [PATCH 10/11] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 11/11] net: macb: " Andrey Smirnov
2017-03-15 21:03 ` [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170314155222.11657-8-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox