mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org, Chris Healy <cphealy@gmail.com>
Subject: Re: [PATCH] ARM: Update zii_vf610_dev_defconfig
Date: Tue, 20 Jun 2017 09:32:56 +0200	[thread overview]
Message-ID: <20170620073256.gorzklbsitwdzmlg@pengutronix.de> (raw)
In-Reply-To: <20170619142355.17429-1-andrew.smirnov@gmail.com>

On Mon, Jun 19, 2017 at 07:23:55AM -0700, Andrey Smirnov wrote:
> Update zii_vf610_dev_defconfig to add needed and remove unused
> features.
> 
> Signed-off-by: Chris Healy <cphealy@gmail.com>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
>  arch/arm/configs/zii_vf610_dev_defconfig | 39 ++++++++------------------------
>  1 file changed, 9 insertions(+), 30 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/configs/zii_vf610_dev_defconfig b/arch/arm/configs/zii_vf610_dev_defconfig
> index bda6044..e2cb658 100644
> --- a/arch/arm/configs/zii_vf610_dev_defconfig
> +++ b/arch/arm/configs/zii_vf610_dev_defconfig
> @@ -1,9 +1,6 @@
>  CONFIG_ARCH_IMX=y
>  CONFIG_IMX_MULTI_BOARDS=y
> -CONFIG_MACH_SABRESD=y
>  CONFIG_MACH_ZII_VF610_DEV=y
> -CONFIG_IMX_IIM=y
> -CONFIG_IMX_IIM_FUSE_BLOW=y
>  CONFIG_THUMB2_BAREBOX=y
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
>  CONFIG_ARM_UNWIND=y
> @@ -23,6 +20,7 @@ CONFIG_BOOTM_INITRD=y
>  CONFIG_BOOTM_OFTREE=y
>  CONFIG_BOOTM_OFTREE_UIMAGE=y
>  CONFIG_BLSPEC=y
> +CONFIG_CONSOLE_RATP=y
>  CONFIG_PARTITION_DISK_EFI=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
>  CONFIG_RESET_SOURCE=y
> @@ -63,7 +61,6 @@ CONFIG_CMD_EDIT=y
>  CONFIG_CMD_MENU=y
>  CONFIG_CMD_MENU_MANAGEMENT=y
>  CONFIG_CMD_MENUTREE=y
> -CONFIG_CMD_SPLASH=y
>  CONFIG_CMD_READLINE=y
>  CONFIG_CMD_TIMEOUT=y
>  CONFIG_CMD_CRC=y
> @@ -76,7 +73,6 @@ CONFIG_CMD_FLASH=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_LED=y
> -CONFIG_CMD_NANDTEST=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_LED_TRIGGER=y
>  CONFIG_CMD_USBGADGET=y
> @@ -89,32 +85,28 @@ CONFIG_CMD_TIME=y
>  CONFIG_NET=y
>  CONFIG_NET_NETCONSOLE=y
>  CONFIG_NET_RESOLV=y
> +CONFIG_OFDEVICE=y
>  CONFIG_OF_BAREBOX_DRIVERS=y
> +CONFIG_AIODEV=y
> +CONFIG_LM75=y
>  CONFIG_DRIVER_NET_FEC_IMX=y
> -CONFIG_AT803X_PHY=y
> +CONFIG_MARVELL_PHY=y
>  CONFIG_MICREL_PHY=y
>  CONFIG_NET_USB=y
>  CONFIG_NET_USB_ASIX=y
>  CONFIG_NET_USB_SMSC95XX=y
>  CONFIG_DRIVER_SPI_IMX=y
> -CONFIG_DRIVER_SPI_DSPI=y
>  CONFIG_I2C=y
>  CONFIG_I2C_IMX=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_MUX_PCA954x=y
>  CONFIG_MTD=y
>  CONFIG_MTD_RAW_DEVICE=y
>  CONFIG_MTD_DATAFLASH=y
>  CONFIG_MTD_M25P80=y
>  CONFIG_MTD_SST25L=y
> -CONFIG_NAND=y
> -CONFIG_NAND_ALLOW_ERASE_BAD=y
> -CONFIG_NAND_IMX=y
> -CONFIG_NAND_IMX_BBM=y
>  CONFIG_MTD_UBI=y
>  CONFIG_MTD_UBI_FASTMAP=y
> -CONFIG_DISK_AHCI=y
> -CONFIG_DISK_AHCI_IMX=y
> -CONFIG_DISK_INTF_PLATFORM_IDE=y
> -CONFIG_DISK_PATA_IMX=y
>  CONFIG_USB_HOST=y
>  CONFIG_USB_IMX_CHIPIDEA=y
>  CONFIG_USB_EHCI=y
> @@ -124,31 +116,18 @@ CONFIG_USB_GADGET=y
>  CONFIG_USB_GADGET_DFU=y
>  CONFIG_USB_GADGET_SERIAL=y
>  CONFIG_USB_GADGET_FASTBOOT=y
> -CONFIG_VIDEO=y
> -CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
> -CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
> -CONFIG_DRIVER_VIDEO_IMX_IPUV3_HDMI=y
> -CONFIG_DRIVER_VIDEO_SIMPLEFB=y
> -CONFIG_DRIVER_VIDEO_EDID=y
>  CONFIG_MCI=y
>  CONFIG_MCI_MMC_BOOT_PARTITIONS=y
>  CONFIG_MCI_IMX_ESDHC=y
> -CONFIG_MFD_MC13XXX=y
> -CONFIG_MFD_MC34704=y
> -CONFIG_MFD_MC9SDZ60=y
> -CONFIG_MFD_STMPE=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_GPIO_OF=y
>  CONFIG_LED_TRIGGERS=y
>  CONFIG_EEPROM_AT25=y
>  CONFIG_EEPROM_AT24=y
> -CONFIG_KEYBOARD_GPIO=y
>  CONFIG_WATCHDOG=y
>  CONFIG_WATCHDOG_IMX=y
> -CONFIG_PWM=y
> -CONFIG_PWM_IMX=y
> -CONFIG_GPIO_STMPE=y
> +CONFIG_GPIO_PCA953X=y
>  CONFIG_GPIO_SX150X=y
>  CONFIG_REGULATOR=y
>  CONFIG_REGULATOR_FIXED=y
> @@ -162,4 +141,4 @@ CONFIG_FS_FAT_WRITE=y
>  CONFIG_FS_FAT_LFN=y
>  CONFIG_FS_UBIFS=y
>  CONFIG_FS_UBIFS_COMPRESSION_LZO=y
> -CONFIG_PNG=y
> +CONFIG_ZLIB=y
> -- 
> 2.9.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2017-06-20  7:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-19 14:23 Andrey Smirnov
2017-06-20  7:32 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170620073256.gorzklbsitwdzmlg@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=cphealy@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox