Re: [PATCH] Marvell: implement marvell_of_reg_init

[Sascha Hauer <s.hauer@pengutronix.de>]

On Tue, Oct 10, 2017 at 02:38:19PM +0200, Clément Leger wrote:
> From ed1cbcd05d5efeb4012d77a9a4ab9c1da0449bdc Mon Sep 17 00:00:00 2001
> From: Clement Leger <clement.leger@kalray.eu>
> Date: Tue, 10 Oct 2017 14:29:49 +0200
> Subject: [PATCH] Marvell: implement marvell_of_reg_init
> 
> Implement marvell_of_reg_init in order to use marvell,reg-init property
> from device-tree. The code is taken from Linux kernel and slighlty
> modify to fit barebox structures.
> ---
>  drivers/net/phy/marvell.c | 73 ++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 69 insertions(+), 4 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> index ea5a4a9..73d6453 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -175,13 +175,78 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
>  };
>  
>  /*
> - * This same function in the Linux kernel parses the marvell,reg-init dt
> - * property and does the necessary register writes. It's kept as an exercise for
> - * a future user to implement this. :-)
> + * Set and/or override some configuration registers based on the
> + * marvell,reg-init property stored in the of_node for the phydev.
> + *
> + * marvell,reg-init = <reg-page reg mask value>,...;
> + *
> + * There may be one or more sets of <reg-page reg mask value>:
> + *
> + * reg-page: which register bank to use.
> + * reg: the register.
> + * mask: if non-zero, ANDed with existing register value.
> + * value: ORed with the masked value and written to the regiser.
> + *
>   */
>  static int marvell_of_reg_init(struct phy_device *phydev)
>  {
> -	return 0;
> +	const __be32 *paddr;
> +	int len, i, saved_page, current_page, page_changed, ret;
> +
> +	if (!phydev->dev.device_node)
> +		return 0;
> +
> +	paddr = of_get_property(phydev->dev.device_node,
> +				"marvell,reg-init", &len);
> +	if (!paddr || len < (4 * sizeof(*paddr)))
> +		return 0;
> +
> +	saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
> +	if (saved_page < 0)
> +		return saved_page;
> +	page_changed = 0;
> +	current_page = saved_page;
> +
> +	ret = 0;
> +	len /= sizeof(*paddr);
> +	for (i = 0; i < len - 3; i += 4) {
> +		u16 reg_page = be32_to_cpup(paddr + i);
> +		u16 reg = be32_to_cpup(paddr + i + 1);
> +		u16 mask = be32_to_cpup(paddr + i + 2);
> +		u16 val_bits = be32_to_cpup(paddr + i + 3);
> +		int val;
> +
> +		if (reg_page != current_page) {
> +			current_page = reg_page;
> +			page_changed = 1;
> +			ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
> +			if (ret < 0)
> +				goto err;
> +		}
> +
> +		val = 0;
> +		if (mask) {
> +			val = phy_read(phydev, reg);
> +			if (val < 0) {
> +				ret = val;
> +				goto err;
> +			}
> +			val &= mask;
> +		}
> +		val |= val_bits;
> +
> +		ret = phy_write(phydev, reg, val);
> +		if (ret < 0)
> +			goto err;
> +
> +	}
> +err:
> +	if (page_changed) {
> +		i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
> +		if (ret == 0)
> +			ret = i;
> +	}
> +	return ret;
>  }
>  
>  static int m88e1121_config_aneg(struct phy_device *phydev)
> -- 
> 1.8.3.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox