mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Cc: Stefan Riedmueller <s.riedmueller@phytec.de>
Subject: [PATCH 05/16] ARM: dts: imx6qdl: phycore: Sync muxing with kernel
Date: Thu, 12 Apr 2018 09:30:06 +0200	[thread overview]
Message-ID: <20180412073017.6750-6-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20180412073017.6750-1-s.hauer@pengutronix.de>

From: Christian Hemp <c.hemp@phytec.de>

Sync the USDCH drive strength muxing with kernel.
With this drive strength we saw no sd card errors.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Acked-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
---
 arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
index 3a5b0dbf24..923c79c67b 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -205,12 +205,12 @@
 
 		pinctrl_usdhc1: usdhc1grp {
 			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
 				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x80000000 /* CD */
 			>;
 		};
-- 
2.16.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-04-12  7:30 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-12  7:30 [PATCH 00/16] ARM: i.MX: phyCORE/phyFLEX i.MX6 updates Sascha Hauer
2018-04-12  7:30 ` [PATCH 01/16] ARM: i.MX: phytec-som-imx: Remove kernel and oftree partiton in NAND Sascha Hauer
2018-04-12  7:30 ` [PATCH 02/16] ARM: i.MX: phytec-som-imx: env: automount emmc if available Sascha Hauer
2018-04-12  7:30 ` [PATCH 03/16] ARM: i.MX: phytec-som-imx: env: add boot script for emmc Sascha Hauer
2018-04-12  7:30 ` [PATCH 04/16] ARM: i.MX: phytec-som-imx: env: add android boot options Sascha Hauer
2018-04-12  7:30 ` Sascha Hauer [this message]
2018-04-12  7:30 ` [PATCH 06/16] ARM: i.MX: phytec-som-imx6: add boot device emmc Sascha Hauer
2018-04-12  7:30 ` [PATCH 07/16] ARM: i.MX: phytec-som-imx6: phycore: Set BUCK mode to SYNC Sascha Hauer
2018-04-12  7:30 ` [PATCH 08/16] ARM: i.MX: phyFLEX: Change Ram Timing for i.MX6 DualLite\Solo (400 MHz) Sascha Hauer
2018-04-12  7:30 ` [PATCH 09/16] ARM: dts: phyCORE-imx6: Add SPINOR env node Sascha Hauer
2018-04-12  7:30 ` [PATCH 10/16] ARM: i.MX: phytec-som-imx6: add phyCORE-i.MX6 QuadPlus with 1GiB RAM Sascha Hauer
2018-04-12  7:30 ` [PATCH 11/16] ARM: i.MX: phytec-som-imx6: add phyCORE-i.MX6 Solo " Sascha Hauer
2018-04-12  7:30 ` [PATCH 12/16] ARM: dts: imx6: phyboard-mira: Add usb support Sascha Hauer
2018-04-12  7:30 ` [PATCH 13/16] ARM: dts: imx6: phyboard-mira: Enable usb host and usb otg port Sascha Hauer
2018-04-12  7:30 ` [PATCH 14/16] ARM: dts: imx6: phyboard-mira: Remove unecessary iomuxc subnode Sascha Hauer
2018-04-12  7:30 ` [PATCH 15/16] ARM: dts: phycore-imx6: Use generic jedec spi nor compatible Sascha Hauer
2018-04-12  7:30 ` [PATCH 16/16] ARM: i.MX: phytec-som-imx6: Change kernel boot image to zImage Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180412073017.6750-6-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.riedmueller@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox