From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v3 26/38] pinctrl: i.MX: Add support for i.MX8
Date: Wed, 6 Jun 2018 11:44:19 -0700 [thread overview]
Message-ID: <20180606184431.10348-27-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180606184431.10348-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/mach-imx/include/mach/iomux-v3.h | 9 ++++
drivers/pinctrl/imx-iomux-v3.c | 56 ++++++++++++++++++++---
2 files changed, 59 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-imx/include/mach/iomux-v3.h b/arch/arm/mach-imx/include/mach/iomux-v3.h
index 40f6e5999..994c15c04 100644
--- a/arch/arm/mach-imx/include/mach/iomux-v3.h
+++ b/arch/arm/mach-imx/include/mach/iomux-v3.h
@@ -17,6 +17,7 @@
#define __MACH_IOMUX_V3_H__
#include <io.h>
+#include <linux/bitfield.h>
/*
* build IOMUX_PAD structure
@@ -95,6 +96,13 @@ typedef u64 iomux_v3_cfg_t;
#define PAD_CTL_DVS (1 << 13)
#define PAD_CTL_HYS (1 << 8)
+#define SHARE_CONF_PAD_CTL_DSE GENMASK(2, 0)
+#define SHARE_CONF_PAD_CTL_SRE GENMASK(4, 3)
+
+#define SHARE_CONF_PAD_CTL_ODE BIT(5)
+#define SHARE_CONF_PAD_CTL_PUE BIT(6)
+#define SHARE_CONF_PAD_CTL_HYS BIT(7)
+
#define PAD_CTL_PKE (1 << 7)
#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
@@ -118,6 +126,7 @@ typedef u64 iomux_v3_cfg_t;
#define SHARE_MUX_CONF_REG 0x1
#define ZERO_OFFSET_VALID 0x2
#define IMX7_PINMUX_LPSR 0x4
+#define SHARE_CONF BIT(3)
static inline void iomux_v3_setup_pad(void __iomem *iomux, unsigned int flags,
u32 mux_reg, u32 conf_reg, u32 input_reg,
diff --git a/drivers/pinctrl/imx-iomux-v3.c b/drivers/pinctrl/imx-iomux-v3.c
index 50d717736..38451875e 100644
--- a/drivers/pinctrl/imx-iomux-v3.c
+++ b/drivers/pinctrl/imx-iomux-v3.c
@@ -73,6 +73,7 @@ EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
* 1 u32 CONFIG, so 24 types in total for each pin.
*/
#define FSL_PIN_SIZE 24
+#define SHARE_CONF_FSL_PIN_SIZE (FSL_PIN_SIZE - 1 * sizeof(u32))
#define IMX_DT_NO_PAD_CTL (1 << 31)
#define IMX_PAD_SION (1 << 30)
@@ -83,22 +84,57 @@ static int imx_iomux_v3_set_state(struct pinctrl_device *pdev, struct device_nod
{
struct imx_iomux_v3 *iomux = container_of(pdev, struct imx_iomux_v3, pinctrl);
const __be32 *list;
- int npins, size, i;
+ const bool share_conf = iomux->flags & SHARE_CONF;
+ int npins, size, i, fsl_pin_size;
+ const char *name;
+ u32 share_conf_val;
dev_dbg(iomux->pinctrl.dev, "set state: %s\n", np->full_name);
- list = of_get_property(np, "fsl,pins", &size);
+ if (share_conf) {
+ u32 drive_strength, slew_rate;
+ int ret;
+
+ fsl_pin_size = SHARE_CONF_FSL_PIN_SIZE;
+ name = "pinmux";
+
+ ret = of_property_read_u32(np, "drive-strength",
+ &drive_strength);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "slew-rate", &slew_rate);
+ if (ret)
+ return ret;
+
+ share_conf_val =
+ FIELD_PREP(SHARE_CONF_PAD_CTL_DSE, drive_strength) |
+ FIELD_PREP(SHARE_CONF_PAD_CTL_SRE, slew_rate);
+
+ if (of_get_property(np, "drive-open-drain", NULL))
+ share_conf_val |= SHARE_CONF_PAD_CTL_ODE;
+
+ if (of_get_property(np, "input-schmitt-enable", NULL))
+ share_conf_val |= SHARE_CONF_PAD_CTL_HYS;
+
+ if (of_get_property(np, "bias-pull-up", NULL))
+ share_conf_val |= SHARE_CONF_PAD_CTL_PUE;
+ } else {
+ fsl_pin_size = FSL_PIN_SIZE;
+ name = "fsl,pins";
+ }
+
+ list = of_get_property(np, name, &size);
if (!list)
return -EINVAL;
-
- if (!size || size % FSL_PIN_SIZE) {
+ if (!size || size % fsl_pin_size) {
dev_err(iomux->pinctrl.dev, "Invalid fsl,pins property in %s\n",
np->full_name);
return -EINVAL;
}
- npins = size / FSL_PIN_SIZE;
+ npins = size / fsl_pin_size;
for (i = 0; i < npins; i++) {
u32 mux_reg = be32_to_cpu(*list++);
@@ -106,7 +142,8 @@ static int imx_iomux_v3_set_state(struct pinctrl_device *pdev, struct device_nod
u32 input_reg = be32_to_cpu(*list++);
u32 mux_val = be32_to_cpu(*list++);
u32 input_val = be32_to_cpu(*list++);
- u32 conf_val = be32_to_cpu(*list++);
+ u32 conf_val = share_conf ?
+ share_conf_val : be32_to_cpu(*list++);
if (conf_val & IMX_PAD_SION) {
mux_val |= IOMUXC_CONFIG_SION;
@@ -180,6 +217,10 @@ static struct imx_iomux_v3_data imx_iomux_imx7_lpsr_data = {
.flags = ZERO_OFFSET_VALID | IMX7_PINMUX_LPSR,
};
+static struct imx_iomux_v3_data imx_iomux_imx8_data = {
+ .flags = SHARE_CONF,
+};
+
static __maybe_unused struct of_device_id imx_iomux_v3_dt_ids[] = {
{
.compatible = "fsl,imx25-iomuxc",
@@ -204,6 +245,9 @@ static __maybe_unused struct of_device_id imx_iomux_v3_dt_ids[] = {
}, {
.compatible = "fsl,imx7d-iomuxc-lpsr",
.data = &imx_iomux_imx7_lpsr_data,
+ }, {
+ .compatible = "fsl,imx8mq-iomuxc",
+ .data = &imx_iomux_imx8_data,
}, {
/* sentinel */
}
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-06 18:45 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 18:43 [PATCH v3 00/38] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 01/38] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 02/38] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 03/38] ARM: Add i.MX8 support Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 04/38] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 05/38] Include our own include/dt-bindings Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 06/38] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 07/38] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 08/38] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 09/38] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 10/38] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 11/38] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 12/38] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 13/38] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 14/38] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 15/38] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 16/38] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 17/38] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 18/38] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 19/38] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 20/38] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 21/38] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 22/38] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 23/38] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 24/38] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 25/38] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-06 18:44 ` Andrey Smirnov [this message]
2018-06-06 18:44 ` [PATCH v3 27/38] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 28/38] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 29/38] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 30/38] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 31/38] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 32/38] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 33/38] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 34/38] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 35/38] Kbuild: Add $(quote) Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 36/38] Add builtin firmware support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 37/38] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 38/38] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-07 12:59 ` [PATCH v3 00/38] ARM: i.MX8MQ and EVK support Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606184431.10348-27-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox