From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [RESEND v3 40/52] ARM: mmu: Make use of dsb() and isb() helpers
Date: Thu, 7 Jun 2018 06:00:56 -0700 [thread overview]
Message-ID: <20180607130108.5339-41-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180607130108.5339-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/cpu/mmu_64.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/mmu_64.h b/arch/arm/cpu/mmu_64.h
index c280d2ced..2cbe72062 100644
--- a/arch/arm/cpu/mmu_64.h
+++ b/arch/arm/cpu/mmu_64.h
@@ -28,7 +28,7 @@ static inline void tlb_invalidate(void)
static inline void set_ttbr_tcr_mair(int el, uint64_t table, uint64_t tcr, uint64_t attr)
{
- asm volatile("dsb sy");
+ dsb();
if (el == 1) {
asm volatile("msr ttbr0_el1, %0" : : "r" (table) : "memory");
asm volatile("msr tcr_el1, %0" : : "r" (tcr) : "memory");
@@ -44,7 +44,7 @@ static inline void set_ttbr_tcr_mair(int el, uint64_t table, uint64_t tcr, uint6
} else {
hang();
}
- asm volatile("isb");
+ isb();
}
static inline uint64_t get_ttbr(int el)
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-07 13:02 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 13:00 [RESEND v3 00/52] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 01/52] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 02/52] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 03/52] ARM: Add i.MX8 support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 04/52] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 05/52] Include our own include/dt-bindings Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 06/52] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 07/52] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 08/52] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 09/52] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 10/52] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 11/52] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 12/52] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 13/52] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 14/52] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 15/52] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 16/52] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 17/52] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 18/52] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 19/52] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 20/52] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 21/52] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 22/52] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 23/52] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 24/52] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 25/52] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 26/52] pinctrl: i.MX: " Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 27/52] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 28/52] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 29/52] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 30/52] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 31/52] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 32/52] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 33/52] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 34/52] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 35/52] Kbuild: Add $(quote) Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 36/52] Add builtin firmware support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 37/52] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 38/52] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 39/52] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-07 13:00 ` Andrey Smirnov [this message]
2018-06-07 13:00 ` [RESEND v3 41/52] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 42/52] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 43/52] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 44/52] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 45/52] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 46/52] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 47/52] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 48/52] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 49/52] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 50/52] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 51/52] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 52/52] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-08 6:46 ` [RESEND v3 00/52] ARM: i.MX8MQ and " Sascha Hauer
2018-06-11 17:56 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607130108.5339-41-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox