From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [RESEND v3 00/52] ARM: i.MX8MQ and EVK support
Date: Fri, 8 Jun 2018 08:46:36 +0200 [thread overview]
Message-ID: <20180608064636.cv7nx5vpkdioea4f@pengutronix.de> (raw)
In-Reply-To: <20180607130108.5339-1-andrew.smirnov@gmail.com>
Hi Andrey,
On Thu, Jun 07, 2018 at 06:00:16AM -0700, Andrey Smirnov wrote:
> RESEND to include ALL of the patches in the series (not just first 38)
>
> Everyone:
>
> Picking up where Sascha left off, this is the next version of the
> patchset that adds support for i.MX8MQ EVK board.
Applied up to 30/52 and most of the rest. For 32 I'd like to ask if it's
really worth making several clock functions static inline. It increases
the image size by a few kb. We do more often than I like, so isn't there
another solution?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-08 6:46 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 13:00 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 01/52] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 02/52] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 03/52] ARM: Add i.MX8 support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 04/52] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 05/52] Include our own include/dt-bindings Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 06/52] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 07/52] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 08/52] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 09/52] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 10/52] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 11/52] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 12/52] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 13/52] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 14/52] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 15/52] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 16/52] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 17/52] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 18/52] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 19/52] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 20/52] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 21/52] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 22/52] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 23/52] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 24/52] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 25/52] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 26/52] pinctrl: i.MX: " Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 27/52] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 28/52] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 29/52] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 30/52] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 31/52] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 32/52] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 33/52] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 34/52] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 35/52] Kbuild: Add $(quote) Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 36/52] Add builtin firmware support Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 37/52] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 38/52] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 39/52] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 40/52] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 41/52] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 42/52] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-07 13:00 ` [RESEND v3 43/52] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 44/52] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 45/52] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 46/52] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 47/52] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 48/52] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 49/52] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 50/52] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 51/52] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-07 13:01 ` [RESEND v3 52/52] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-08 6:46 ` Sascha Hauer [this message]
2018-06-11 17:56 ` [RESEND v3 00/52] ARM: i.MX8MQ and " Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180608064636.cv7nx5vpkdioea4f@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox