From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fRBsL-0000yb-3T for barebox@lists.infradead.org; Fri, 08 Jun 2018 07:32:01 +0000 Received: from ptx.hi.pengutronix.de ([2001:67c:670:100:1d::c0]) by metis.ext.pengutronix.de with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.89) (envelope-from ) id 1fRBs7-0007mk-Kk for barebox@lists.infradead.org; Fri, 08 Jun 2018 09:31:43 +0200 Received: from sha by ptx.hi.pengutronix.de with local (Exim 4.89) (envelope-from ) id 1fRBs7-0001fv-By for barebox@lists.infradead.org; Fri, 08 Jun 2018 09:31:43 +0200 Date: Fri, 8 Jun 2018 09:31:43 +0200 From: Sascha Hauer Message-ID: <20180608073143.744ow3zxrhwuq4ko@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: v2018.06.0 To: Barebox List Hi All, We have a release for June. I'm happy that this time I am not the patch record holder, it's Andrey who created 60 patches for this release. Thanks Andrey ;) Among other things we now have serdev support which can be used to attach devices behind UARTs. Another thing worth noting is that 'ifup -a' no longer scans for USB devices if not necessary (which can be annoying on network boots). Also the bootloader spec code now can filter out entries not matching a configured machine id. Have fun! Sascha Alexander Kurz (2): ARM omap beagle xload_defconfig: do not load drivers from DT ARM omap beagle defconfig: remove trace initcalls Andreas Schmidt (1): blspec: add checking of optional key machine-id Andrey Gusakov (2): mfd: mc13xxx: add function returning mc13xxx type aiodev: mc13xxx: add adc support Andrey Smirnov (60): ARM: Make use of ALIGN_DOWN macro in barebox-arm.h pinctrl-vf610: Make use of BIT macro ARM: start: Avoid calling arm_mem_barebox_image() twice i.MX: vf610-twr: Print '>' when DEBUG_LL is enabled i.MX: vf610-twr: Convert to use vf610_setup_pad() ARM: i.MX: esdctl: Use IOMEM instead of (void *) ARM: i.MX51: esdctl: Replace magic value with ESDMISC_DDR2_8_BANK ARM: i.MX6: esdctl: Share memory size calculation code ARM: i.MX6: esdctl: Factor out common code in imx6*_barebox_entry() ARM: i.MX6: esdctl: Use symbolic constants for RAM base address ARM: i.MX: esdctl: Make use of min_t() ARM: i.MX: esdctl: Introduce memory_sdram_size() ARM: i.MX: esdctl: Add support for Vybrid's memory controller i.MX: vf610-twr: Make use of vf610_barebox_entry() i.MX: zii-vf610-dev: Make use of vf610_barebox_entry() serial/lpuart: Do not enable UART FIFO include: Port linux/build_bug.h from Linux kernel include: Port linux/bitfield.h from Linux kernel ARM: i.MX: Add a function to extract BMOD value ARM: i.MX: Simplify serial bootsource detection for i.MX6 and 7 ARM: i.MX: Account for unprogrammed fuses on i.MX6 and i.MX7 ARM: i.MX7: boot: Add code to handle SD/MMC manufacture mode ARM: i.MX7: boot: Remove incorrect NAND bootsource detection ARM: i.MX7: boot: Fix SPI-NOR/QSPI boot source mixup ARM: i.MX: boot: Remove unnecessary returns ARM: i.MX: boot: Move magic values into small functions ARM: i.MX: boot: Share code to detect NAND as a boot source ARM: i.MX: boot: Check for NAND boot only if necessary on i.MX53, 6 ARM: i.MX53: boot: Move magic numbers info utility functions ARM: i.MX6: boot: Move magic numbers into utility functions ARM: i.MX7: boot: Move magic numbers into utility functions bootsource: Add BOOTSOURCE_CAN ARM: VFxxx: Implement code to detect bootsource ARM: i.MX6: boot: Return BOOTSOURCE_SPI_NOR, not BOOTSOURCE_SPI console: Introduce console_drain() console: Add simplified 'serdev' framework from Linux kernel serdev: Add trivial blocking read function serial: Drop .remove functions from all drivers serdev: Allow polling interval to be adjusted at runtime ARM: i.MX: boot: Coalesce copy-pasted code ARM: imx_v7_defconfig: Select various missing v7 boards by default common: reset_source: Add the notion of "reset source instance" ARM: i.MX: Add infrastructure to record SoC reset reason ARM: i.MX6: Record reset reason as a part of startup ARM: i.MX7: Record reset reason as a part of startup mfd: Port RAVE SP driver from Linux kernel watchdog: Port RAVE SP watchdog driver from Linux kernel common: reset_source: Introduce reset_source_name() ARM: i.MX: Log detected reset reason ARM: i.MX: Print "revision unknown" if that is the case ARM: VFxxx: Add code to detect cpu variant ARM: VFxxx: Detect cpu variant on start ARM: VFxxx: Record reset reason as a part of startup ARM: i.MX7: Remove unnecessary local variable ARM: i.MX51: Replace expicit casts with IOMEM ARM: i.MX: Fix incorrect IMX_SRC_SRSR_CSU_RESET ARM: i.MX: Make imx6_reset_reasons global ARM: i.MX: Introduce IMX_SRC_SRSR ARM: i.MX53: Record reset reason as a part of startup ARM: i.MX51: Record reset reason as a part of startup Antony Pavlov (4): net: make SoCFPGA-specific designware driver work again ARM: socfpga: boards: pll_config.h: remove duplicate macros ARM: socfpga: mach/pll_config.h: add guard macro ARM: socfpga_defconfig: enable Altera firmware stuff Christian Hemp (5): net: phy: micrel: fix too late link up ARM: i.MX: phytec-som-imx: Remove kernel and oftree partiton in NAND ARM: dts: imx6qdl: phycore: Sync muxing with kernel ARM: i.MX: phytec-som-imx6: phycore: Set BUCK mode to SYNC ARM: i.MX: phytec-som-imx6: add phyCORE-i.MX6 QuadPlus with 1GiB RAM Christoph Fritz (1): ARM: Add Advantech imx6 board support Daniel Schultz (2): common: state: Add property to protect existing data ARM: dts: AM335x: Add keep-previous-content property Enrico Scholz (8): mfd: da9063: reset watchdog timer mfd: da9063: added generic reg_update() function mfd: da9063: use da906x_reg_update() mfd: da9063: add device specific init function mfd: da9063: added of_device_id information mfd: da9063: read out and report device id ARM: i.MX: phycore-som: added and enabled DA9062 PMIC ARM: i.MX: pfla02: set priority of da9063 watchdog Lucas Stach (5): fb: reject enable request when framebuffer has no mode video: IPUv3-LDB: demote dual-channel message to info level video: tc358767: don't link AUX i2c adapter to parent OF node ARM: imx6sx: use correct clocks for GPT wdt: da9053: fix missed dev->hwdev conversion Marc Ohlf (1): arm: imx6: don't reset PFDs that are used by periph_clk Matthias Rabe (3): ARM: i.MX: phytec-som-imx: env: automount emmc if available ARM: i.MX: phytec-som-imx: env: add boot script for emmc ARM: i.MX: phytec-som-imx: env: add android boot options Michael Grzeschik (1): usb: gadget: fastboot: fix barebox update without using buffer Nikita Yushchenko (1): usbnet: increase bulk message timeout Sascha Hauer (25): net: on ifup -a only detect devices when necessary clk: i.MX6: Adjust GPMI parent clock ARM: i.MX6: de-inline i.MX6 type detection ARM: i.MX6: factor out function to read si_rev ARM: i.MX6: Add cpu type for 'plus' variants clk: i.MX6: Fix enfc_sel for i.MX6dqp ARM: imx_v7_defconfig: enable da9063 ARM: i.MX6: Make cpu_is_mx6xy() greppable dts: update to v4.17-rc1 dts: update to v4.17-rc2 dts: update to v4.17-rc3 Merge branch 'for-next/aiodev' Merge branch 'for-next/arm' Merge branch 'for-next/dts' Merge branch 'for-next/fb' Merge branch 'for-next/imx' Merge branch 'for-next/imx-bootsource' Merge branch 'for-next/imx-reset-reason' Merge branch 'for-next/mfd-dialog' Merge branch 'for-next/misc' Merge branch 'for-next/net' Merge branch 'for-next/serdev' Merge branch 'for-next/socfpga' Merge branch 'for-next/state' Release v2018.06.0 Stefan Christ (3): mfd: da9063: update Kconfig for DA9062 ARM: i.MX: phytec-som-imx6: add boot device emmc ARM: i.MX: phytec-som-imx6: add phyCORE-i.MX6 Solo with 1GiB RAM Stefan Riedmueller (6): ARM: dts: phyCORE-imx6: Add SPINOR env node ARM: dts: imx6: phyboard-mira: Add usb support ARM: dts: imx6: phyboard-mira: Enable usb host and usb otg port ARM: dts: imx6: phyboard-mira: Remove unecessary iomuxc subnode ARM: dts: phycore-imx6: Use generic jedec spi nor compatible ARM: i.MX: phytec-som-imx6: Change kernel boot image to zImage Teresa Remmet (1): mtd: core: Fix printing partitions in hex michael grassmann (1): ARM: i.MX: phyFLEX: Change Ram Timing for i.MX6 DualLite\Solo (400 MHz) -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox