mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v4 24/54] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset
Date: Mon, 11 Jun 2018 18:52:56 -0700	[thread overview]
Message-ID: <20180612015326.26192-25-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612015326.26192-1-andrew.smirnov@gmail.com>

Add code to support specifying different buffer address and SD/MMC
device offset to read it from in esdhc_start_image(). This change is
needed to support i.MX8.

NOTE: We intentionnaly "emulate" reading at arbitrary offset in
esdhc_start_image() as opposed to implementing it in
esdhc_read_blocks() in order to avoid having to detect if units of
blocks or bytes should be used to specify offset to CMD18.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/mach-imx/xload-esdhc.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-imx/xload-esdhc.c b/arch/arm/mach-imx/xload-esdhc.c
index 4580f53cd..6ab4cabb7 100644
--- a/arch/arm/mach-imx/xload-esdhc.c
+++ b/arch/arm/mach-imx/xload-esdhc.c
@@ -216,10 +216,11 @@ static int esdhc_read_blocks(struct esdhc *esdhc, void *dst, size_t len)
 	return 0;
 }
 
-static int esdhc_start_image(struct esdhc *esdhc)
+static int
+esdhc_start_image(struct esdhc *esdhc, ptrdiff_t address, u32 offset)
 {
-	void *buf = (void *)0x10000000;
-	u32 *ivt = buf + SZ_1K;
+	void *buf = (void *)address;
+	u32 *ivt = buf + offset + SZ_1K;
 	int ret, len;
 	void __noreturn (*bb)(void);
 	unsigned int ofs;
@@ -227,9 +228,10 @@ static int esdhc_start_image(struct esdhc *esdhc)
 	len = imx_image_size();
 	len = ALIGN(len, SECTOR_SIZE);
 
-	ret = esdhc_read_blocks(esdhc, buf, 3 * SECTOR_SIZE);
+	ret = esdhc_read_blocks(esdhc, buf, offset + SZ_1K + SECTOR_SIZE);
 	if (ret)
 		return ret;
+
 	if (*(u32 *)(ivt) != 0x402000d1) {
 		pr_debug("IVT header not found on SD card. Found 0x%08x instead of 0x402000d1\n",
 				*ivt);
@@ -238,7 +240,7 @@ static int esdhc_start_image(struct esdhc *esdhc)
 
 	pr_debug("Check ok, loading image\n");
 
-	ret = esdhc_read_blocks(esdhc, buf, len);
+	ret = esdhc_read_blocks(esdhc, buf, offset + len);
 	if (ret) {
 		pr_err("Loading image failed with %d\n", ret);
 		return ret;
@@ -246,7 +248,7 @@ static int esdhc_start_image(struct esdhc *esdhc)
 
 	pr_debug("Image loaded successfully\n");
 
-	ofs = *(ivt + 1) - *(ivt + 8);
+	ofs = offset + *(ivt + 1) - *(ivt + 8);
 
 	bb = buf + ofs;
 
@@ -288,5 +290,5 @@ int imx6_esdhc_start_image(int instance)
 
 	esdhc.is_mx6 = 1;
 
-	return esdhc_start_image(&esdhc);
+	return esdhc_start_image(&esdhc, 0x10000000, 0);
 }
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-06-12  1:56 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-12  1:52 [PATCH v4 00/54] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 01/54] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 02/54] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 03/54] ARM: Add i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 04/54] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 05/54] Include our own include/dt-bindings Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 06/54] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 07/54] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 08/54] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 09/54] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 10/54] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 11/54] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 12/54] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 13/54] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 14/54] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 15/54] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 16/54] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 17/54] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 18/54] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 19/54] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 20/54] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 21/54] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 22/54] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 23/54] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-12  1:52 ` Andrey Smirnov [this message]
2018-06-12  1:52 ` [PATCH v4 25/54] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 26/54] pinctrl: i.MX: " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 27/54] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 28/54] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 29/54] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 30/54] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 31/54] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 32/54] common/clock: Move delay and timeout functions to lib/ Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 33/54] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 34/54] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 35/54] Kbuild: Add $(quote) Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 36/54] Add builtin firmware support Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 37/54] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 38/54] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 39/54] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 40/54] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 41/54] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 42/54] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 43/54] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 44/54] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 45/54] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 46/54] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 47/54] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 48/54] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 49/54] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 50/54] scripts: imx-image: Use a loop to create multiple header copies Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 51/54] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 52/54] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 53/54] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-12  2:58   ` Fabio Estevam
2018-06-12 14:52     ` Andrey Smirnov
2018-06-12  5:49   ` Holger Schurig
2018-06-12 14:53     ` Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 54/54] ARM: Introduce imx_v8_defconfig Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180612015326.26192-25-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox