mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v4 39/54] ARM: lib64: Make string functions aware of MMU configuration
Date: Mon, 11 Jun 2018 18:53:11 -0700	[thread overview]
Message-ID: <20180612015326.26192-40-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612015326.26192-1-andrew.smirnov@gmail.com>

Optimized version of memset() in memset.S if called as:

    memset(foo, 0, size)

will try to explicitly zero out data cache with:

    dc	zva, dst

which will result in Alignement Exception (DABT) if MMU is not
enabled.

For more info see:

    - C4.4.8 "DC ZVA, Data Cache Zero by VA"
    - D5.2.8 "The effects of disabling a stage of address translation"

in "ARM Architecture Reference Manual. ARMv8, for ARMv8-A architecture
profile"

In similar vein, using optimized version of memcpy() could lead to a
unaligned 16-byte write (using 'stp'), which is not allowed for
Device-nGnRnE type of memory (see D5.2.8) and would liead to
Alignement Exception.

To fix both problems expose non-optimized and optimzied versions of
the function and created a wrapper to dispatch the call to either one
based on if MMU is enabled or not.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/Kconfig        |  7 +++++++
 arch/arm/lib64/Makefile |  2 +-
 arch/arm/lib64/memcpy.S |  6 +++---
 arch/arm/lib64/memset.S |  4 ++--
 arch/arm/lib64/string.c | 22 ++++++++++++++++++++++
 include/string.h        |  3 +++
 lib/string.c            | 18 ++++++++++++------
 7 files changed, 50 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/lib64/string.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bd736284f..c330a5a18 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -353,6 +353,13 @@ menu "ARM specific settings"
 
 config ARM_OPTIMZED_STRING_FUNCTIONS
 	bool "use assembler optimized string functions"
+	#
+	# memset() and memcpy() in arm/lib64/mem[set|cpy].S are
+	# written with assumption of enabled MMU and cache. Depending
+	# on the inputs in may fail with Alignement exception if used
+	# without MMU
+	#
+	depends on !CPU_V8 || MMU
 	help
 	  Say yes here to use assembler optimized memcpy / memset functions.
 	  These functions work much faster than the normal versions but
diff --git a/arch/arm/lib64/Makefile b/arch/arm/lib64/Makefile
index 77647128a..4c0019fab 100644
--- a/arch/arm/lib64/Makefile
+++ b/arch/arm/lib64/Makefile
@@ -2,7 +2,7 @@ obj-y += stacktrace.o
 obj-$(CONFIG_ARM_LINUX)	+= armlinux.o
 obj-y	+= div0.o
 obj-$(CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS)	+= memcpy.o
-obj-$(CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS)	+= memset.o
+obj-$(CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS)	+= memset.o string.o
 extra-y += barebox.lds
 obj-pbl-y   += runtime-offset.o
 
diff --git a/arch/arm/lib64/memcpy.S b/arch/arm/lib64/memcpy.S
index cfed3191c..a70e96ca2 100644
--- a/arch/arm/lib64/memcpy.S
+++ b/arch/arm/lib64/memcpy.S
@@ -67,8 +67,8 @@
 	stp \ptr, \regB, [\regC], \val
 	.endm
 
-	.weak memcpy
-ENTRY(memcpy)
+	.weak __arch_memcpy
+ENTRY(__arch_memcpy)
 #include "copy_template.S"
 	ret
-ENDPROC(memcpy)
+ENDPROC(__arch_memcpy)
diff --git a/arch/arm/lib64/memset.S b/arch/arm/lib64/memset.S
index 380a54097..d17bcc612 100644
--- a/arch/arm/lib64/memset.S
+++ b/arch/arm/lib64/memset.S
@@ -54,7 +54,7 @@ tmp3w		.req	w9
 tmp3		.req	x9
 
 	.weak memset
-ENTRY(memset)
+ENTRY(__arch_memset)
 	mov	dst, dstin	/* Preserve return value.  */
 	and	A_lw, val, #255
 	orr	A_lw, A_lw, A_lw, lsl #8
@@ -212,4 +212,4 @@ ENTRY(memset)
 	ands	count, count, zva_bits_x
 	b.ne	.Ltail_maybe_long
 	ret
-ENDPROC(memset)
+ENDPROC(__arch_memset)
diff --git a/arch/arm/lib64/string.c b/arch/arm/lib64/string.c
new file mode 100644
index 000000000..cb2633152
--- /dev/null
+++ b/arch/arm/lib64/string.c
@@ -0,0 +1,22 @@
+#include <common.h>
+#include <asm/system.h>
+#include <string.h>
+
+void *__arch_memset(void *dst, int c, __kernel_size_t size);
+void *__arch_memcpy(void * dest, const void *src, size_t count);
+
+void *memset(void *dst, int c, __kernel_size_t size)
+{
+	if (likely(get_cr() & CR_M))
+		return __arch_memset(dst, c, size);
+
+	return __default_memset(dst, c, size);
+}
+
+void *memcpy(void * dest, const void *src, size_t count)
+{
+	if (likely(get_cr() & CR_M))
+		return __arch_memcpy(dest, src, count);
+
+	return __default_memcpy(dest, src, count);
+}
\ No newline at end of file
diff --git a/include/string.h b/include/string.h
index 0c557d6f1..6ceb33224 100644
--- a/include/string.h
+++ b/include/string.h
@@ -6,4 +6,7 @@
 void *memdup(const void *, size_t);
 int strtobool(const char *str, int *val);
 
+void *__default_memset(void *, int, __kernel_size_t);
+void *__default_memcpy(void * dest,const void *src,size_t count);
+
 #endif /* __STRING_H */
diff --git a/lib/string.c b/lib/string.c
index f588933e8..717b59aa5 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -479,7 +479,6 @@ char *strswab(const char *s)
 }
 #endif
 
-#ifndef __HAVE_ARCH_MEMSET
 /**
  * memset - Fill a region of memory with the given value
  * @s: Pointer to the start of the area.
@@ -488,7 +487,7 @@ char *strswab(const char *s)
  *
  * Do not use memset() to access IO space, use memset_io() instead.
  */
-void * memset(void * s,int c,size_t count)
+void *__default_memset(void * s,int c,size_t count)
 {
 	char *xs = (char *) s;
 
@@ -497,10 +496,12 @@ void * memset(void * s,int c,size_t count)
 
 	return s;
 }
+EXPORT_SYMBOL(__default_memset);
+
+#ifndef __HAVE_ARCH_MEMSET
+void *memset(void *s, int c, size_t count) __alias(__default_memset);
 #endif
-EXPORT_SYMBOL(memset);
 
-#ifndef __HAVE_ARCH_MEMCPY
 /**
  * memcpy - Copy one area of memory to another
  * @dest: Where to copy to
@@ -510,7 +511,7 @@ EXPORT_SYMBOL(memset);
  * You should not use this function to access IO space, use memcpy_toio()
  * or memcpy_fromio() instead.
  */
-void * memcpy(void * dest,const void *src,size_t count)
+void *__default_memcpy(void * dest,const void *src,size_t count)
 {
 	char *tmp = (char *) dest, *s = (char *) src;
 
@@ -519,9 +520,14 @@ void * memcpy(void * dest,const void *src,size_t count)
 
 	return dest;
 }
-#endif
 EXPORT_SYMBOL(memcpy);
 
+#ifndef __HAVE_ARCH_MEMCPY
+void *memcpy(void * dest, const void *src, size_t count)
+	__alias(__default_memcpy);
+#endif
+
+
 #ifndef __HAVE_ARCH_MEMMOVE
 /**
  * memmove - Copy one area of memory to another
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-06-12  1:57 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-12  1:52 [PATCH v4 00/54] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 01/54] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 02/54] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 03/54] ARM: Add i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 04/54] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 05/54] Include our own include/dt-bindings Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 06/54] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 07/54] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 08/54] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 09/54] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 10/54] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 11/54] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 12/54] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 13/54] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 14/54] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 15/54] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 16/54] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 17/54] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 18/54] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 19/54] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 20/54] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 21/54] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 22/54] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 23/54] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 24/54] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 25/54] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 26/54] pinctrl: i.MX: " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 27/54] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 28/54] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 29/54] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 30/54] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 31/54] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 32/54] common/clock: Move delay and timeout functions to lib/ Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 33/54] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 34/54] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 35/54] Kbuild: Add $(quote) Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 36/54] Add builtin firmware support Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 37/54] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 38/54] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-12  1:53 ` Andrey Smirnov [this message]
2018-06-12  1:53 ` [PATCH v4 40/54] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 41/54] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 42/54] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 43/54] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 44/54] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 45/54] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 46/54] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 47/54] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 48/54] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 49/54] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 50/54] scripts: imx-image: Use a loop to create multiple header copies Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 51/54] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 52/54] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 53/54] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-12  2:58   ` Fabio Estevam
2018-06-12 14:52     ` Andrey Smirnov
2018-06-12  5:49   ` Holger Schurig
2018-06-12 14:53     ` Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 54/54] ARM: Introduce imx_v8_defconfig Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180612015326.26192-40-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox