From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 02/14] VFxxx: Add common header for DDR IOMUX DCD configuration
Date: Tue, 12 Jun 2018 11:47:48 -0700 [thread overview]
Message-ID: <20180612184800.4940-3-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612184800.4940-1-andrew.smirnov@gmail.com>
A number of VFxxx boards copy DDR layout/design of vf610-twr board and
they all share IOMUX settings. Move those settings to a common file
to avoid code duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
| 52 +---------------
| 52 +---------------
.../vf610-iomux-ddr-default.imxcfg | 60 +++++++++++++++++++
.../mach-imx/include/mach/vf610-iomux-regs.h | 55 +++++++++++++++++
4 files changed, 119 insertions(+), 100 deletions(-)
create mode 100644 arch/arm/mach-imx/include/mach/flash-header/vf610-iomux-ddr-default.imxcfg
create mode 100644 arch/arm/mach-imx/include/mach/vf610-iomux-regs.h
--git a/arch/arm/boards/freescale-vf610-twr/flash-header-vf610-twr.imxcfg b/arch/arm/boards/freescale-vf610-twr/flash-header-vf610-twr.imxcfg
index ae7447b4f..3cf005f1f 100644
--- a/arch/arm/boards/freescale-vf610-twr/flash-header-vf610-twr.imxcfg
+++ b/arch/arm/boards/freescale-vf610-twr/flash-header-vf610-twr.imxcfg
@@ -2,8 +2,7 @@ soc vf610
loadaddr 0x80000000
dcdofs 0x400
-#define VF610_DDR_PAD_CTRL 0x00000180 /* 25 Ohm drive strength */
-#define VF610_DDR_PAD_CTRL_1 0x00010180 /* 25 Ohm drive strength + differential input */
+#include <mach/vf610-iomux-regs.h>
#define DDRMC_PHY_DQ_TIMING 0x00002613
#define DDRMC_PHY_DQS_TIMING 0x00002615
@@ -61,54 +60,7 @@ check 32 until_any_bit_set 0x40050030 0x80000000
clear_bits 32 0x4006b008 0x00000040
set_bits 32 0x4006b008 0x00002000
-wm 32 0x40048220 VF610_DDR_PAD_CTRL
-wm 32 0x40048224 VF610_DDR_PAD_CTRL
-wm 32 0x40048228 VF610_DDR_PAD_CTRL
-wm 32 0x4004822c VF610_DDR_PAD_CTRL
-wm 32 0x40048230 VF610_DDR_PAD_CTRL
-wm 32 0x40048234 VF610_DDR_PAD_CTRL
-wm 32 0x40048238 VF610_DDR_PAD_CTRL
-wm 32 0x4004823c VF610_DDR_PAD_CTRL
-wm 32 0x40048240 VF610_DDR_PAD_CTRL
-wm 32 0x40048244 VF610_DDR_PAD_CTRL
-wm 32 0x40048248 VF610_DDR_PAD_CTRL
-wm 32 0x4004824c VF610_DDR_PAD_CTRL
-wm 32 0x40048250 VF610_DDR_PAD_CTRL
-wm 32 0x40048254 VF610_DDR_PAD_CTRL
-wm 32 0x40048258 VF610_DDR_PAD_CTRL
-wm 32 0x4004825c VF610_DDR_PAD_CTRL
-wm 32 0x40048260 VF610_DDR_PAD_CTRL
-wm 32 0x40048264 VF610_DDR_PAD_CTRL
-wm 32 0x40048268 VF610_DDR_PAD_CTRL
-wm 32 0x4004826c VF610_DDR_PAD_CTRL
-wm 32 0x40048270 VF610_DDR_PAD_CTRL
-wm 32 0x40048274 VF610_DDR_PAD_CTRL
-wm 32 0x40048278 VF610_DDR_PAD_CTRL
-wm 32 0x4004827c VF610_DDR_PAD_CTRL_1
-wm 32 0x40048280 VF610_DDR_PAD_CTRL_1
-wm 32 0x40048284 VF610_DDR_PAD_CTRL_1
-wm 32 0x40048288 VF610_DDR_PAD_CTRL_1
-wm 32 0x4004828c VF610_DDR_PAD_CTRL_1
-wm 32 0x40048290 VF610_DDR_PAD_CTRL_1
-wm 32 0x40048294 VF610_DDR_PAD_CTRL_1
-wm 32 0x40048298 VF610_DDR_PAD_CTRL_1
-wm 32 0x4004829c VF610_DDR_PAD_CTRL_1
-wm 32 0x400482a0 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482a4 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482a8 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482ac VF610_DDR_PAD_CTRL_1
-wm 32 0x400482b0 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482b4 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482b8 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482bc VF610_DDR_PAD_CTRL_1
-wm 32 0x400482c0 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482c4 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482c8 VF610_DDR_PAD_CTRL_1
-wm 32 0x400482cc VF610_DDR_PAD_CTRL
-wm 32 0x400482d0 VF610_DDR_PAD_CTRL
-wm 32 0x400482d4 VF610_DDR_PAD_CTRL
-wm 32 0x400482d8 VF610_DDR_PAD_CTRL
-wm 32 0x4004821c VF610_DDR_PAD_CTRL
+#include <mach/flash-header/vf610-iomux-ddr-default.imxcfg>
wm 32 0x400ae000 0x00000600
wm 32 0x400ae008 0x00000020
--git a/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg b/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg
index a641ff82e..194a17b3b 100644
--- a/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg
+++ b/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg
@@ -2,8 +2,7 @@ soc vf610
loadaddr 0x80000000
dcdofs 0x400
-#define VF610_DDR_PAD_CTRL 0x00000180 /* 25 Ohm drive strength */
-#define VF610_DDR_PAD_CTRL_1 0x00010180 /* 25 Ohm drive strength + differential input */
+#include <mach/vf610-iomux-regs.h>
#define DDRMC_PHY_DQ_TIMING 0x00002613
#define DDRMC_PHY_DQS_TIMING 0x00002615
@@ -42,54 +41,7 @@ check 32 until_any_bit_set 0x40050030 0x80000000
clear_bits 32 0x4006b008 0x00000040
set_bits 32 0x4006b008 0x00002000
-wm 32 0x40048220 0x00000180
-wm 32 0x40048224 0x00000180
-wm 32 0x40048228 0x00000180
-wm 32 0x4004822c 0x00000180
-wm 32 0x40048230 0x00000180
-wm 32 0x40048234 0x00000180
-wm 32 0x40048238 0x00000180
-wm 32 0x4004823c 0x00000180
-wm 32 0x40048240 0x00000180
-wm 32 0x40048244 0x00000180
-wm 32 0x40048248 0x00000180
-wm 32 0x4004824c 0x00000180
-wm 32 0x40048250 0x00000180
-wm 32 0x40048254 0x00000180
-wm 32 0x40048258 0x00000180
-wm 32 0x4004825c 0x00000180
-wm 32 0x40048260 0x00000180
-wm 32 0x40048264 0x00000180
-wm 32 0x40048268 0x00000180
-wm 32 0x4004826c 0x00000180
-wm 32 0x40048270 0x00000180
-wm 32 0x40048274 0x00000180
-wm 32 0x40048278 0x00000180
-wm 32 0x4004827c 0x00010180
-wm 32 0x40048280 0x00010180
-wm 32 0x40048284 0x00010180
-wm 32 0x40048288 0x00010180
-wm 32 0x4004828c 0x00010180
-wm 32 0x40048290 0x00010180
-wm 32 0x40048294 0x00010180
-wm 32 0x40048298 0x00010180
-wm 32 0x4004829c 0x00010180
-wm 32 0x400482a0 0x00010180
-wm 32 0x400482a4 0x00010180
-wm 32 0x400482a8 0x00010180
-wm 32 0x400482ac 0x00010180
-wm 32 0x400482b0 0x00010180
-wm 32 0x400482b4 0x00010180
-wm 32 0x400482b8 0x00010180
-wm 32 0x400482bc 0x00010180
-wm 32 0x400482c0 0x00010180
-wm 32 0x400482c4 0x00010180
-wm 32 0x400482c8 0x00010180
-wm 32 0x400482cc 0x00000180
-wm 32 0x400482d0 0x00000180
-wm 32 0x400482d4 0x00000180
-wm 32 0x400482d8 0x00000180
-wm 32 0x4004821c 0x00000180
+#include <mach/flash-header/vf610-iomux-ddr-default.imxcfg>
wm 32 0x400ae000 0x00000600
wm 32 0x400ae008 0x00000005
diff --git a/arch/arm/mach-imx/include/mach/flash-header/vf610-iomux-ddr-default.imxcfg b/arch/arm/mach-imx/include/mach/flash-header/vf610-iomux-ddr-default.imxcfg
new file mode 100644
index 000000000..e2ad818c6
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/flash-header/vf610-iomux-ddr-default.imxcfg
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * VFxxx shared DDR IOMUX DCD code. Intended use is to share code
+ * between all board that copy VF610 Tower Board DDR reference
+ * layout/design
+ *
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+#define VF610_DDR_PAD_CTRL 0x00000180 /* 40 Ohm drive strength */
+#define VF610_DDR_PAD_CTRL_1 0x00010180 /* ditto + differential input */
+
+wm 32 VF610_PAD_DDR_A15__DDR_A_15 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A14__DDR_A_14 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A13__DDR_A_13 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A12__DDR_A_12 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A11__DDR_A_11 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A10__DDR_A_10 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A9__DDR_A_9 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A8__DDR_A_8 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A7__DDR_A_7 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A6__DDR_A_6 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A5__DDR_A_5 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A4__DDR_A_4 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A3__DDR_A_3 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A2__DDR_A_2 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A1__DDR_A_1 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_A0__DDR_A_0 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_BA2__DDR_BA_2 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_BA1__DDR_BA_1 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_BA0__DDR_BA_0 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_CAS__DDR_CAS_B VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_CKE__DDR_CKE_0 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_CLK__DDR_CLK_0 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_CS__DDR_CS_B_0 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_D15__DDR_D_15 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D14__DDR_D_14 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D13__DDR_D_13 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D12__DDR_D_12 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D11__DDR_D_11 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D10__DDR_D_10 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D9__DDR_D_9 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D8__DDR_D_8 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D7__DDR_D_7 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D6__DDR_D_6 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D5__DDR_D_5 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D4__DDR_D_4 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D3__DDR_D_3 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D2__DDR_D_2 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D1__DDR_D_1 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_D0__DDR_D_0 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_DQM1__DDR_DQM_1 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_DQM0__DDR_DQM_0 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_DQS1__DDR_DQS_1 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_DQS0__DDR_DQS_0 VF610_DDR_PAD_CTRL_1
+wm 32 VF610_PAD_DDR_RAS__DDR_RAS_B VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_WE__DDR_WE_B VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_ODT1__DDR_ODT_0 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_ODT0__DDR_ODT_1 VF610_DDR_PAD_CTRL
+wm 32 VF610_PAD_DDR_RESETB VF610_DDR_PAD_CTRL
diff --git a/arch/arm/mach-imx/include/mach/vf610-iomux-regs.h b/arch/arm/mach-imx/include/mach/vf610-iomux-regs.h
new file mode 100644
index 000000000..38b3bc7da
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/vf610-iomux-regs.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * VFxxx IOMUX register addresses definitions for use in DCD
+ *
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+#define VF610_PAD_DDR_RESETB 0x4004821c
+#define VF610_PAD_DDR_A15__DDR_A_15 0x40048220
+#define VF610_PAD_DDR_A14__DDR_A_14 0x40048224
+#define VF610_PAD_DDR_A13__DDR_A_13 0x40048228
+#define VF610_PAD_DDR_A12__DDR_A_12 0x4004822c
+#define VF610_PAD_DDR_A11__DDR_A_11 0x40048230
+#define VF610_PAD_DDR_A10__DDR_A_10 0x40048234
+#define VF610_PAD_DDR_A9__DDR_A_9 0x40048238
+#define VF610_PAD_DDR_A8__DDR_A_8 0x4004823c
+#define VF610_PAD_DDR_A7__DDR_A_7 0x40048240
+#define VF610_PAD_DDR_A6__DDR_A_6 0x40048244
+#define VF610_PAD_DDR_A5__DDR_A_5 0x40048248
+#define VF610_PAD_DDR_A4__DDR_A_4 0x4004824c
+#define VF610_PAD_DDR_A3__DDR_A_3 0x40048250
+#define VF610_PAD_DDR_A2__DDR_A_2 0x40048254
+#define VF610_PAD_DDR_A1__DDR_A_1 0x40048258
+#define VF610_PAD_DDR_A0__DDR_A_0 0x4004825c
+#define VF610_PAD_DDR_BA2__DDR_BA_2 0x40048260
+#define VF610_PAD_DDR_BA1__DDR_BA_1 0x40048264
+#define VF610_PAD_DDR_BA0__DDR_BA_0 0x40048268
+#define VF610_PAD_DDR_CAS__DDR_CAS_B 0x4004826c
+#define VF610_PAD_DDR_CKE__DDR_CKE_0 0x40048270
+#define VF610_PAD_DDR_CLK__DDR_CLK_0 0x40048274
+#define VF610_PAD_DDR_CS__DDR_CS_B_0 0x40048278
+#define VF610_PAD_DDR_D15__DDR_D_15 0x4004827c
+#define VF610_PAD_DDR_D14__DDR_D_14 0x40048280
+#define VF610_PAD_DDR_D13__DDR_D_13 0x40048284
+#define VF610_PAD_DDR_D12__DDR_D_12 0x40048288
+#define VF610_PAD_DDR_D11__DDR_D_11 0x4004828c
+#define VF610_PAD_DDR_D10__DDR_D_10 0x40048290
+#define VF610_PAD_DDR_D9__DDR_D_9 0x40048294
+#define VF610_PAD_DDR_D8__DDR_D_8 0x40048298
+#define VF610_PAD_DDR_D7__DDR_D_7 0x4004829c
+#define VF610_PAD_DDR_D6__DDR_D_6 0x400482a0
+#define VF610_PAD_DDR_D5__DDR_D_5 0x400482a4
+#define VF610_PAD_DDR_D4__DDR_D_4 0x400482a8
+#define VF610_PAD_DDR_D3__DDR_D_3 0x400482ac
+#define VF610_PAD_DDR_D2__DDR_D_2 0x400482b0
+#define VF610_PAD_DDR_D1__DDR_D_1 0x400482b4
+#define VF610_PAD_DDR_D0__DDR_D_0 0x400482b8
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1 0x400482bc
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0 0x400482c0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1 0x400482c4
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0 0x400482c8
+#define VF610_PAD_DDR_RAS__DDR_RAS_B 0x400482cc
+#define VF610_PAD_DDR_WE__DDR_WE_B 0x400482d0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0 0x400482d4
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x400482d8
\ No newline at end of file
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-12 18:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 18:47 [PATCH 00/14] VFxxx DCD fixes and improvements Andrey Smirnov
2018-06-12 18:47 ` [PATCH 01/14] VFxxx: Remove stale code from DCD files Andrey Smirnov
2018-06-12 18:47 ` Andrey Smirnov [this message]
2018-06-12 18:47 ` [PATCH 03/14] VFxxx: Add common DDR PHY DCD header Andrey Smirnov
2018-06-12 18:47 ` [PATCH 04/14] VFxxx: Add common header for DDR clock setting DCD Andrey Smirnov
2018-06-12 18:47 ` [PATCH 05/14] VFxxx: Add common DCD header for common DDR configuration Andrey Smirnov
2018-06-12 18:47 ` [PATCH 06/14] VFxxx: Reconcile shared DDR DCD configuration with U-Boot Andrey Smirnov
2018-06-12 18:47 ` [PATCH 07/14] VFxxx: Reconcile shared DDR DCD with memory datasheet Andrey Smirnov
2018-06-12 18:47 ` [PATCH 08/14] VFxxx: zii-vf610-dev: Drop most custom DDRMC DCD code Andrey Smirnov
2018-06-12 18:47 ` [PATCH 09/14] VFxxx: Initialize IOMUXC_DUMMY_DDRBYTE1/2 in default DDR DCD Andrey Smirnov
2018-06-12 18:47 ` [PATCH 10/14] VFxxx: Reconcile shared DDR IOMUX DCD with schematic Andrey Smirnov
2018-06-12 18:47 ` [PATCH 11/14] VFxxx: DCD: Remove CR151 initialization Andrey Smirnov
2018-06-12 18:47 ` [PATCH 12/14] VFxxx: DCD: Drop initialization of CR139 - CR148 Andrey Smirnov
2018-06-12 18:47 ` [PATCH 13/14] VFxxx: DCD: Remove CR97, CR98 and CR99 Andrey Smirnov
2018-06-12 18:48 ` [PATCH 14/14] VFxxx: DCD: Remove read leveling and gate training delays Andrey Smirnov
2018-06-13 7:58 ` [PATCH 00/14] VFxxx DCD fixes and improvements Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180612184800.4940-3-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox