mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 1/2] ARM: i.MX bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag
Date: Fri, 29 Jun 2018 08:49:13 +0200	[thread overview]
Message-ID: <20180629064914.518-1-s.hauer@pengutronix.de> (raw)

This patch reimplements the IMX_INTERNAL_FLAG_KEEP_DOSPART flag
and makes it more generic. Until now we only kept a dos partition
table over the update. Beginning with i.MX8 we may also want to
preserve a GPT, so we have to extend the preserved area.

It might also be the case that not (only) a partition table is
stored in the initial area of a device, but also other unrelated
data, so it's better to just keep the initial area that is unused
by the i.MX ROM. It's also good to export the flag to allow boards
to specify the initial area shall be preserved.

When a board wants to set the flag for a mtd like device then it
has to check for suitable erase sizes beforehand. We do not check
this (yet).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/imx-bbu-internal.c | 70 +++++++++-------------------
 arch/arm/mach-imx/include/mach/bbu.h | 15 ++++++
 2 files changed, 38 insertions(+), 47 deletions(-)

diff --git a/arch/arm/mach-imx/imx-bbu-internal.c b/arch/arm/mach-imx/imx-bbu-internal.c
index 84810f18a9..5422235b1b 100644
--- a/arch/arm/mach-imx/imx-bbu-internal.c
+++ b/arch/arm/mach-imx/imx-bbu-internal.c
@@ -35,7 +35,6 @@
 #define FLASH_HEADER_OFFSET_MMC		0x400
 
 #define IMX_INTERNAL_FLAG_NAND		(1 << 0)
-#define IMX_INTERNAL_FLAG_KEEP_DOSPART	(1 << 1)
 #define IMX_INTERNAL_FLAG_ERASE		(1 << 2)
 
 struct imx_internal_bbu_handler {
@@ -53,26 +52,31 @@ static int imx_bbu_write_device(struct imx_internal_bbu_handler *imx_handler,
 		const char *devicefile, struct bbu_data *data,
 		const void *buf, int image_len)
 {
-	int fd, ret;
-	int written = 0;
+	int fd, ret, offset = 0;
 
 	fd = open(devicefile, O_RDWR | O_CREAT);
 	if (fd < 0)
 		return fd;
 
+	if (imx_handler->handler.flags & IMX_BBU_FLAG_KEEP_HEAD) {
+		image_len -= imx_handler->flash_header_offset;
+		offset += imx_handler->flash_header_offset;
+		buf += imx_handler->flash_header_offset;
+	}
+
 	if (imx_handler->flags & IMX_INTERNAL_FLAG_ERASE) {
-		pr_debug("%s: unprotecting %s from 0 to 0x%08x\n", __func__,
-				devicefile, image_len);
-		ret = protect(fd, image_len, 0, 0);
+		pr_debug("%s: unprotecting %s from 0x%08x to 0x%08x\n", __func__,
+				devicefile, offset, image_len);
+		ret = protect(fd, image_len, offset, 0);
 		if (ret && ret != -ENOSYS) {
 			pr_err("unprotecting %s failed with %s\n", devicefile,
 					strerror(-ret));
 			goto err_close;
 		}
 
-		pr_debug("%s: erasing %s from 0 to 0x%08x\n", __func__,
-				devicefile, image_len);
-		ret = erase(fd, image_len, 0);
+		pr_debug("%s: erasing %s from 0x%08x to 0x%08x\n", __func__,
+				devicefile, offset, image_len);
+		ret = erase(fd, image_len, offset);
 		if (ret) {
 			pr_err("erasing %s failed with %s\n", devicefile,
 					strerror(-ret));
@@ -80,43 +84,14 @@ static int imx_bbu_write_device(struct imx_internal_bbu_handler *imx_handler,
 		}
 	}
 
-	if (imx_handler->flags & IMX_INTERNAL_FLAG_KEEP_DOSPART) {
-		void *mbr = xzalloc(512);
-
-		pr_debug("%s: reading DOS partition table in order to keep it\n", __func__);
-
-		ret = read(fd, mbr, 512);
-		if (ret < 0) {
-			free(mbr);
-			goto err_close;
-		}
-
-		memcpy(mbr, buf, 0x1b8);
-
-		ret = lseek(fd, 0, SEEK_SET);
-		if (ret) {
-			free(mbr);
-			goto err_close;
-		}
-
-		ret = write(fd, mbr, 512);
-
-		free(mbr);
-
-		if (ret < 0)
-			goto err_close;
-
-		written = 512;
-	}
-
-	ret = write(fd, buf + written, image_len - written);
+	ret = pwrite(fd, buf, image_len, offset);
 	if (ret < 0)
 		goto err_close;
 
 	if (imx_handler->flags & IMX_INTERNAL_FLAG_ERASE) {
-		pr_debug("%s: protecting %s from 0 to 0x%08x\n", __func__,
-				devicefile, image_len);
-		ret = protect(fd, image_len, 0, 1);
+		pr_debug("%s: protecting %s from 0x%08x to 0x%08x\n", __func__,
+				devicefile, offset, image_len);
+		ret = protect(fd, image_len, offset, 1);
 		if (ret && ret != -ENOSYS) {
 			pr_err("protecting %s failed with %s\n", devicefile,
 					strerror(-ret));
@@ -454,6 +429,7 @@ static struct imx_internal_bbu_handler *__init_handler(const char *name, char *d
 	struct bbu_handler *handler;
 
 	imx_handler = xzalloc(sizeof(*imx_handler));
+	imx_handler->flags = flags & IMX_BBU_FLAG_MASK;
 	handler = &imx_handler->handler;
 	handler->devicefile = devicefile;
 	handler->name = name;
@@ -482,7 +458,7 @@ imx_bbu_internal_mmc_register_handler(const char *name, char *devicefile,
 	imx_handler = __init_handler(name, devicefile, flags);
 	imx_handler->flash_header_offset = FLASH_HEADER_OFFSET_MMC;
 
-	imx_handler->flags = IMX_INTERNAL_FLAG_KEEP_DOSPART;
+	imx_handler->flags |= IMX_BBU_FLAG_KEEP_HEAD;
 	imx_handler->handler.handler = handler;
 
 	return __register_handler(imx_handler);
@@ -496,7 +472,7 @@ int imx51_bbu_internal_spi_i2c_register_handler(const char *name,
 	imx_handler = __init_handler(name, devicefile, flags);
 	imx_handler->flash_header_offset = FLASH_HEADER_OFFSET_MMC;
 
-	imx_handler->flags = IMX_INTERNAL_FLAG_ERASE;
+	imx_handler->flags |= IMX_INTERNAL_FLAG_ERASE;
 	imx_handler->handler.handler = imx_bbu_internal_v1_update;
 
 	return __register_handler(imx_handler);
@@ -536,7 +512,7 @@ int imx53_bbu_internal_spi_i2c_register_handler(const char *name, char *devicefi
 	imx_handler = __init_handler(name, devicefile, flags);
 	imx_handler->flash_header_offset = FLASH_HEADER_OFFSET_MMC;
 
-	imx_handler->flags = IMX_INTERNAL_FLAG_ERASE;
+	imx_handler->flags |= IMX_INTERNAL_FLAG_ERASE;
 	imx_handler->handler.handler = imx_bbu_internal_v2_update;
 
 	return __register_handler(imx_handler);
@@ -554,7 +530,7 @@ int imx53_bbu_internal_nand_register_handler(const char *name,
 	imx_handler->flash_header_offset = FLASH_HEADER_OFFSET_MMC;
 
 	imx_handler->handler.handler = imx_bbu_internal_v2_update;
-	imx_handler->flags = IMX_INTERNAL_FLAG_NAND;
+	imx_handler->flags |= IMX_INTERNAL_FLAG_NAND;
 	imx_handler->handler.devicefile = "/dev/nand0";
 	imx_handler->device_size = partition_size;
 
@@ -613,7 +589,7 @@ int imx_bbu_external_nor_register_handler(const char *name, char *devicefile,
 	struct imx_internal_bbu_handler *imx_handler;
 
 	imx_handler = __init_handler(name, devicefile, flags);
-	imx_handler->flags = IMX_INTERNAL_FLAG_ERASE;
+	imx_handler->flags |= IMX_INTERNAL_FLAG_ERASE;
 	imx_handler->handler.handler = imx_bbu_external_update;
 
 	return __register_handler(imx_handler);
diff --git a/arch/arm/mach-imx/include/mach/bbu.h b/arch/arm/mach-imx/include/mach/bbu.h
index d623828312..c2e875d342 100644
--- a/arch/arm/mach-imx/include/mach/bbu.h
+++ b/arch/arm/mach-imx/include/mach/bbu.h
@@ -7,6 +7,21 @@
 struct imx_dcd_entry;
 struct imx_dcd_v2_entry;
 
+/*
+ * The ROM code reads images from a certain offset of the boot device
+ * (usually 0x400), whereas the update images start from offset 0x0.
+ * Set this flag to skip the offset on both the update image and the
+ * device so that the initial boot device portion is preserved. This
+ * is useful if a partition table or other data is in this area.
+ */
+#define IMX_BBU_FLAG_KEEP_HEAD	(1 << 16)
+
+/*
+ * The upper 16 bit of the flags passes to the below functions are reserved
+ * for i.MX specific flags
+ */
+#define IMX_BBU_FLAG_MASK	0xffff0000
+
 #ifdef CONFIG_BAREBOX_UPDATE
 
 int imx51_bbu_internal_mmc_register_handler(const char *name, char *devicefile,
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2018-06-29  6:49 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-29  6:49 Sascha Hauer [this message]
2018-06-29  6:49 ` [PATCH 2/2] ARM: i.MX bbu: support partitions starting at i.MX header Sascha Hauer
2018-06-29 18:29   ` Andrey Smirnov
2018-06-29 18:28 ` [PATCH 1/2] ARM: i.MX bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag Andrey Smirnov
2018-07-02  4:41   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180629064914.518-1-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox