From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 3/4] ARM: i.MX: bbu: reimplement IMX_INTERNAL_FLAG_KEEP_DOSPART flag
Date: Mon, 2 Jul 2018 06:41:07 +0200 [thread overview]
Message-ID: <20180702044108.11466-4-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20180702044108.11466-1-s.hauer@pengutronix.de>
This patch reimplements the IMX_INTERNAL_FLAG_KEEP_DOSPART flag
and makes it more generic. Until now we only kept a dos partition
table over the update. Beginning with i.MX8 we may also want to
preserve a GPT, so we have to extend the preserved area.
It might also be the case that not (only) a partition table is
stored in the initial area of a device, but also other unrelated
data, so it's better to just keep the initial area that is unused
by the i.MX ROM. It's also good to export the flag to allow boards
to specify the initial area shall be preserved.
When a board wants to set the flag for a mtd like device then it
has to check for suitable erase sizes beforehand. We do not check
this (yet).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/imx-bbu-internal.c | 65 +++++++++-------------------
arch/arm/mach-imx/include/mach/bbu.h | 15 +++++++
2 files changed, 35 insertions(+), 45 deletions(-)
diff --git a/arch/arm/mach-imx/imx-bbu-internal.c b/arch/arm/mach-imx/imx-bbu-internal.c
index fae94fdc4e..7a512b1de4 100644
--- a/arch/arm/mach-imx/imx-bbu-internal.c
+++ b/arch/arm/mach-imx/imx-bbu-internal.c
@@ -34,9 +34,8 @@
#define FLASH_HEADER_OFFSET_MMC 0x400
-#define IMX_INTERNAL_FLAG_NAND BIT(16)
-#define IMX_INTERNAL_FLAG_KEEP_DOSPART BIT(17)
-#define IMX_INTERNAL_FLAG_ERASE BIT(18)
+#define IMX_INTERNAL_FLAG_NAND BIT(31)
+#define IMX_INTERNAL_FLAG_ERASE BIT(30)
struct imx_internal_bbu_handler {
struct bbu_handler handler;
@@ -52,26 +51,31 @@ static int imx_bbu_write_device(struct imx_internal_bbu_handler *imx_handler,
const char *devicefile, struct bbu_data *data,
const void *buf, int image_len)
{
- int fd, ret;
- int written = 0;
+ int fd, ret, offset = 0;
fd = open(devicefile, O_RDWR | O_CREAT);
if (fd < 0)
return fd;
+ if (imx_handler->handler.flags & IMX_BBU_FLAG_KEEP_HEAD) {
+ image_len -= imx_handler->flash_header_offset;
+ offset += imx_handler->flash_header_offset;
+ buf += imx_handler->flash_header_offset;
+ }
+
if (imx_handler->handler.flags & IMX_INTERNAL_FLAG_ERASE) {
- pr_debug("%s: unprotecting %s from 0 to 0x%08x\n", __func__,
- devicefile, image_len);
- ret = protect(fd, image_len, 0, 0);
+ pr_debug("%s: unprotecting %s from 0x%08x to 0x%08x\n", __func__,
+ devicefile, offset, image_len);
+ ret = protect(fd, image_len, offset, 0);
if (ret && ret != -ENOSYS) {
pr_err("unprotecting %s failed with %s\n", devicefile,
strerror(-ret));
goto err_close;
}
- pr_debug("%s: erasing %s from 0 to 0x%08x\n", __func__,
- devicefile, image_len);
- ret = erase(fd, image_len, 0);
+ pr_debug("%s: erasing %s from 0x%08x to 0x%08x\n", __func__,
+ devicefile, offset, image_len);
+ ret = erase(fd, image_len, offset);
if (ret) {
pr_err("erasing %s failed with %s\n", devicefile,
strerror(-ret));
@@ -79,43 +83,14 @@ static int imx_bbu_write_device(struct imx_internal_bbu_handler *imx_handler,
}
}
- if (imx_handler->handler.flags & IMX_INTERNAL_FLAG_KEEP_DOSPART) {
- void *mbr = xzalloc(512);
-
- pr_debug("%s: reading DOS partition table in order to keep it\n", __func__);
-
- ret = read(fd, mbr, 512);
- if (ret < 0) {
- free(mbr);
- goto err_close;
- }
-
- memcpy(mbr, buf, 0x1b8);
-
- ret = lseek(fd, 0, SEEK_SET);
- if (ret) {
- free(mbr);
- goto err_close;
- }
-
- ret = write(fd, mbr, 512);
-
- free(mbr);
-
- if (ret < 0)
- goto err_close;
-
- written = 512;
- }
-
- ret = write(fd, buf + written, image_len - written);
+ ret = pwrite(fd, buf, image_len, offset);
if (ret < 0)
goto err_close;
if (imx_handler->handler.flags & IMX_INTERNAL_FLAG_ERASE) {
- pr_debug("%s: protecting %s from 0 to 0x%08x\n", __func__,
- devicefile, image_len);
- ret = protect(fd, image_len, 0, 1);
+ pr_debug("%s: protecting %s from 0x%08x to 0x%08x\n", __func__,
+ devicefile, offset, image_len);
+ ret = protect(fd, image_len, offset, 1);
if (ret && ret != -ENOSYS) {
pr_err("protecting %s failed with %s\n", devicefile,
strerror(-ret));
@@ -479,7 +454,7 @@ imx_bbu_internal_mmc_register_handler(const char *name, char *devicefile,
struct imx_internal_bbu_handler *imx_handler;
imx_handler = __init_handler(name, devicefile, flags |
- IMX_INTERNAL_FLAG_KEEP_DOSPART);
+ IMX_BBU_FLAG_KEEP_HEAD);
imx_handler->flash_header_offset = FLASH_HEADER_OFFSET_MMC;
imx_handler->handler.handler = handler;
diff --git a/arch/arm/mach-imx/include/mach/bbu.h b/arch/arm/mach-imx/include/mach/bbu.h
index d623828312..f19aacce06 100644
--- a/arch/arm/mach-imx/include/mach/bbu.h
+++ b/arch/arm/mach-imx/include/mach/bbu.h
@@ -7,6 +7,21 @@
struct imx_dcd_entry;
struct imx_dcd_v2_entry;
+/*
+ * The ROM code reads images from a certain offset of the boot device
+ * (usually 0x400), whereas the update images start from offset 0x0.
+ * Set this flag to skip the offset on both the update image and the
+ * device so that the initial boot device portion is preserved. This
+ * is useful if a partition table or other data is in this area.
+ */
+#define IMX_BBU_FLAG_KEEP_HEAD BIT(16)
+
+/*
+ * The upper 16 bit of the flags passes to the below functions are reserved
+ * for i.MX specific flags
+ */
+#define IMX_BBU_FLAG_MASK 0xffff0000
+
#ifdef CONFIG_BAREBOX_UPDATE
int imx51_bbu_internal_mmc_register_handler(const char *name, char *devicefile,
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-07-02 4:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 4:41 [PATCH v2 0/4] bbu: i.MX: Generalize " Sascha Hauer
2018-07-02 4:41 ` [PATCH 1/4] bbu: reserve upper 16 bits for handler specific flags Sascha Hauer
2018-07-02 4:41 ` [PATCH 2/4] ARM: i.MX: bbu: remove handler specific flags variable Sascha Hauer
2018-07-02 4:41 ` Sascha Hauer [this message]
2018-07-02 4:41 ` [PATCH 4/4] ARM: i.MX: bbu: support partitions starting at i.MX header Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180702044108.11466-4-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox