mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Roland Hieber <r.hieber@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Roland Hieber <r.hieber@pengutronix.de>
Subject: [PATCH v3 07/14] ARM: MXS: refactor mx2*_power_init source configuration
Date: Mon, 13 Aug 2018 15:02:53 +0200	[thread overview]
Message-ID: <20180813130300.32497-8-r.hieber@pengutronix.de> (raw)
In-Reply-To: <20180813130300.32497-1-r.hieber@pengutronix.de>

Having three ints as parameter suggests that we can use up to 2^3
power configurations for the system, but when we look at the code, the
power setup is packaged in if {...} else if {...} else if {...} blocks,
so setting more than one parameter to 1 is useless here.

Refactor the parameters into an enum to get rid of that suggestion.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/boards/duckbill/lowlevel.c           |  2 +-
 arch/arm/boards/freescale-mx28-evk/lowlevel.c |  2 +-
 arch/arm/boards/imx233-olinuxino/lowlevel.c   |  2 +-
 arch/arm/boards/karo-tx28/lowlevel.c          |  2 +-
 arch/arm/mach-mxs/include/mach/init.h         | 24 +++++++--
 arch/arm/mach-mxs/power-init.c                | 49 +++++++------------
 6 files changed, 41 insertions(+), 40 deletions(-)

diff --git a/arch/arm/boards/duckbill/lowlevel.c b/arch/arm/boards/duckbill/lowlevel.c
index cb60667323..3f8e4ad271 100644
--- a/arch/arm/boards/duckbill/lowlevel.c
+++ b/arch/arm/boards/duckbill/lowlevel.c
@@ -51,7 +51,7 @@ static noinline void duckbill_init(void)
 
 	pr_debug("initializing power...\n");
 
-	mx28_power_init(0, 0, 1);
+	mx28_power_init(POWER_USE_5V);
 
 	pr_debug("initializing SDRAM...\n");
 
diff --git a/arch/arm/boards/freescale-mx28-evk/lowlevel.c b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
index 2c8d27e801..b6a8793c9e 100644
--- a/arch/arm/boards/freescale-mx28-evk/lowlevel.c
+++ b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
@@ -43,7 +43,7 @@ static noinline void freescale_mx28evk_init(void)
 
 	pr_debug("initializing power...\n");
 
-	mx28_power_init(0, 1, 0);
+	mx28_power_init(POWER_USE_BATTERY_INPUT);
 
 	pr_debug("initializing SDRAM...\n");
 
diff --git a/arch/arm/boards/imx233-olinuxino/lowlevel.c b/arch/arm/boards/imx233-olinuxino/lowlevel.c
index bfb50be717..c6cf26b61d 100644
--- a/arch/arm/boards/imx233-olinuxino/lowlevel.c
+++ b/arch/arm/boards/imx233-olinuxino/lowlevel.c
@@ -154,7 +154,7 @@ static noinline void imx23_olinuxino_init(void)
 
 	pr_debug("initializing power...\n");
 
-	mx23_power_init(0, 0, 1);
+	mx23_power_init(POWER_USE_5V);
 
 	pr_debug("initializing SDRAM...\n");
 
diff --git a/arch/arm/boards/karo-tx28/lowlevel.c b/arch/arm/boards/karo-tx28/lowlevel.c
index abc223d3b4..5a6a3e3519 100644
--- a/arch/arm/boards/karo-tx28/lowlevel.c
+++ b/arch/arm/boards/karo-tx28/lowlevel.c
@@ -43,7 +43,7 @@ static noinline void karo_tx28_init(void)
 
 	pr_debug("initializing power...\n");
 
-	mx28_power_init(0, 1, 0);
+	mx28_power_init(POWER_USE_BATTERY_INPUT);
 
 	pr_debug("initializing SDRAM...\n");
 
diff --git a/arch/arm/mach-mxs/include/mach/init.h b/arch/arm/mach-mxs/include/mach/init.h
index 66dfd635de..878cf4ad62 100644
--- a/arch/arm/mach-mxs/include/mach/init.h
+++ b/arch/arm/mach-mxs/include/mach/init.h
@@ -12,10 +12,26 @@
 
 void mxs_early_delay(int delay);
 
-void mx23_power_init(int __has_battery, int __use_battery_input,
-		int __use_5v_input);
-void mx28_power_init(int __has_battery, int __use_battery_input,
-		int __use_5v_input);
+/**
+ * Power configuration of the system:
+ * - POWER_USE_5V: use 5V input as power supply
+ * - POWER_USE_BATTERY: use battery input when the system is supplied by a battery
+ * - POWER_USE_BATTERY_INPUT: use battery input when the system is supplied by
+ *   a DC source (instead of a real battery) on the battery input
+ */
+enum mxs_power_config {
+	POWER_USE_5V			= 0b00000000,
+	POWER_USE_BATTERY		= 0b00000001,
+	POWER_USE_BATTERY_INPUT		= 0b00000010,
+};
+extern int power_config;
+static inline enum mxs_power_config mxs_power_config_get_use(void) {
+	return (power_config & 0b00000011);
+}
+
+
+void mx23_power_init(const int config);
+void mx28_power_init(const int config);
 void mxs_power_wait_pswitch(void);
 
 extern const uint32_t mx28_dram_vals_default[190];
diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
index 595b51c5ba..14f9b7cca7 100644
--- a/arch/arm/mach-mxs/power-init.c
+++ b/arch/arm/mach-mxs/power-init.c
@@ -24,21 +24,7 @@
 #include <mach/regs-rtc.h>
 #include <mach/regs-lradc.h>
 
-/*
- * has_battery - true when this board has a battery.
- */
-static int has_battery;
-
-/*
- * use_battery_input - true when this board is supplied from the
- * battery input, but has a DC source instead of a real battery
- */
-static int use_battery_input;
-
-/*
- * use_5v_input - true when this board can use the 5V input
- */
-static int use_5v_input;
+int power_config;
 
 static void mxs_power_status(void)
 {
@@ -514,7 +500,8 @@ static void mxs_power_enable_4p2(void)
 		POWER_5VCTRL_HEADROOM_ADJ_MASK,
 		0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
 
-	if (has_battery || use_battery_input)
+	if (mxs_power_config_get_use() == POWER_USE_BATTERY ||
+	    mxs_power_config_get_use() == POWER_USE_BATTERY_INPUT)
 		dropout_ctrl = POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL;
 	else
 		dropout_ctrl = POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2;
@@ -1182,16 +1169,15 @@ static void mx23_ungate_power(void)
  *
  * This function calls all the power block initialization functions in
  * proper sequence to start the power block.
+ *
+ * @config: see enum mxs_power_config for possible options
  */
-void mx23_power_init(int __has_battery, int __use_battery_input,
-		int __use_5v_input)
+void mx23_power_init(const int config)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)IMX_POWER_BASE;
 
-	has_battery = __has_battery;
-	use_battery_input = __use_battery_input;
-	use_5v_input = __use_5v_input;
+	power_config = config;
 
 	mx23_ungate_power();
 
@@ -1204,11 +1190,11 @@ void mx23_power_init(int __has_battery, int __use_battery_input,
 
 	mxs_src_power_init();
 
-	if (has_battery)
+	if (mxs_power_config_get_use() == POWER_USE_BATTERY)
 		mxs_power_configure_power_source();
-	else if (use_battery_input)
+	else if (mxs_power_config_get_use() == POWER_USE_BATTERY_INPUT)
 		mxs_enable_battery_input();
-	else if (use_5v_input)
+	else if (mxs_power_config_get_use() == POWER_USE_5V)
 		mxs_boot_valid_5v();
 
 	mxs_power_clock2pll();
@@ -1243,16 +1229,15 @@ void mx23_power_init(int __has_battery, int __use_battery_input,
  *
  * This function calls all the power block initialization functions in
  * proper sequence to start the power block.
+ *
+ * @config: see enum mxs_power_config for possible options
  */
-void mx28_power_init(int __has_battery, int __use_battery_input,
-		int __use_5v_input)
+void mx28_power_init(const int config)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)IMX_POWER_BASE;
 
-	has_battery = __has_battery;
-	use_battery_input = __use_battery_input;
-	use_5v_input = __use_5v_input;
+	power_config = config;
 
 	mxs_power_status();
 	mxs_power_clock2xtal();
@@ -1264,11 +1249,11 @@ void mx28_power_init(int __has_battery, int __use_battery_input,
 
 	mxs_src_power_init();
 
-	if (has_battery)
+	if (mxs_power_config_get_use() == POWER_USE_BATTERY)
 		mxs_power_configure_power_source();
-	else if (use_battery_input)
+	else if (mxs_power_config_get_use() == POWER_USE_BATTERY_INPUT)
 		mxs_enable_battery_input();
-	else if (use_5v_input)
+	else if (mxs_power_config_get_use() == POWER_USE_5V)
 		mxs_boot_valid_5v();
 
 	mxs_power_clock2pll();
-- 
2.18.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-08-13 13:05 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-13 13:02 [PATCH v3 00/14] MXS low-level improvements Roland Hieber
2018-08-13 13:02 ` [PATCH v3 01/14] scripts: mxsimage: Allow unencrypted images Roland Hieber
2018-08-13 13:02 ` [PATCH v3 02/14] images: MXS: allow generation of unencrypted bootstreams Roland Hieber
2018-08-13 13:02 ` [PATCH v3 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM Roland Hieber
2018-08-13 13:02 ` [PATCH v3 04/14] ARM: MXS: allow configuration of EMI clock prescaler Roland Hieber
2018-08-13 13:02 ` [PATCH v3 05/14] ARM: i.MX28: Add memory size detection Roland Hieber
2018-08-13 13:02 ` [PATCH v3 06/14] ARM: i.MX23: " Roland Hieber
2018-08-13 13:02 ` Roland Hieber [this message]
2018-08-13 13:02 ` [PATCH v3 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled Roland Hieber
2018-08-13 13:02 ` [PATCH v3 09/14] ARM: MXS: make power levels configurable in mx2*_power_init Roland Hieber
2018-08-13 13:02 ` [PATCH v3 10/14] ARM: MXS: fix VDDx brownout setup logic Roland Hieber
2018-08-13 13:02 ` [PATCH v3 11/14] ARM: MXS: make VDDx brownout setup more understandable Roland Hieber
2018-08-13 13:02 ` [PATCH v3 12/14] ARM: MXS: mxs_power_status: use less magic values Roland Hieber
2018-08-13 13:02 ` [PATCH v3 13/14] ARM: MXS: mxs_power_status: align output Roland Hieber
2018-08-13 13:03 ` [PATCH v3 14/14] Documentation: MXS: general update and improvements Roland Hieber
2018-08-14  6:55 ` [PATCH v3 00/14] MXS low-level improvements Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180813130300.32497-8-r.hieber@pengutronix.de \
    --to=r.hieber@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox