From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fwZoY-0000EX-Vp for barebox@lists.infradead.org; Sun, 02 Sep 2018 21:21:51 +0000 From: Roland Hieber Date: Sun, 2 Sep 2018 23:21:22 +0200 Message-Id: <20180902212123.16405-4-r.hieber@pengutronix.de> In-Reply-To: <20180902212123.16405-1-r.hieber@pengutronix.de> References: <20180902212123.16405-1-r.hieber@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 3/4] ARM: i.MX: add defconfig for the Kindle i.MX50 boards To: barebox@lists.infradead.org Cc: Roland Hieber From: Roland Hieber Pin down the minimal config needed for a Kindle 4/5 device to boot into the vendor Linux. As the board documentation says, there is an upper limit of ~240 KB for the bootloader partition on those devices. Using XZ image compression instead of the default LZO reduced the file size from 214 KB to 172 KB, so enabling that too. Signed-off-by: Roland Hieber --- arch/arm/configs/kindle-mx50_defconfig | 70 ++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 arch/arm/configs/kindle-mx50_defconfig diff --git a/arch/arm/configs/kindle-mx50_defconfig b/arch/arm/configs/kindle-mx50_defconfig new file mode 100644 index 0000000000..31bfc9c06b --- /dev/null +++ b/arch/arm/configs/kindle-mx50_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARCH_IMX=y +CONFIG_IMX_MULTI_BOARDS=y +CONFIG_MACH_KINDLE_MX50=y +CONFIG_THUMB2_BAREBOX=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_ARM_UNWIND=y +CONFIG_MMU=y +CONFIG_MMU_EARLY=y +CONFIG_MALLOC_SIZE=0x0 +CONFIG_MALLOC_TLSF=y +CONFIG_KALLSYMS=y +CONFIG_RELOCATABLE=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_FLEXIBLE_BOOTARGS=y +CONFIG_BOOTM_SHOW_TYPE=y +CONFIG_BOOTM_VERBOSE=y +CONFIG_BOOTM_INITRD=y +CONFIG_BOOTM_OFTREE=y +CONFIG_CONSOLE_ACTIVATE_ALL=y +CONFIG_CONSOLE_ALLOW_COLOR=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y +CONFIG_CMD_DMESG=y +CONFIG_LONGHELP=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_BOOT=y +CONFIG_CMD_RESET=y +CONFIG_CMD_AUTOMOUNT=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_GLOBAL=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_MAGICVAR=y +CONFIG_CMD_MAGICVAR_HELP=y +CONFIG_CMD_DETECT=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USBGADGET=y +CONFIG_CMD_OF_DUMP=y +CONFIG_CMD_OFTREE=y +CONFIG_OFDEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_BAREBOX_DRIVERS=y +CONFIG_MTD=y +CONFIG_MTD_WRITE=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_IMX_CHIPIDEA=y +CONFIG_USB_EHCI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DRIVER_ARC=y +CONFIG_USB_GADGET_SERIAL=y +CONFIG_USB_GADGET_FASTBOOT=y +CONFIG_MCI=y +CONFIG_MCI_INFO=y +CONFIG_MCI_WRITE=y +CONFIG_MCI_MMC_BOOT_PARTITIONS=y +CONFIG_MCI_IMX_ESDHC=y +CONFIG_PINCTRL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED=y +CONFIG_GENERIC_PHY=y +CONFIG_USB_NOP_XCEIV=y +CONFIG_FS_AUTOMOUNT=y +CONFIG_IMAGE_COMPRESSION_XZKERN=y -- 2.18.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox