mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marcin Niestroj <m.niestroj@grinn-global.com>
To: barebox@lists.infradead.org
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Subject: [PATCH 14/18] crypto: caam - fix endless loop when DECO acquire fails
Date: Mon,  3 Sep 2018 13:24:04 +0200	[thread overview]
Message-ID: <20180903112408.2086-15-m.niestroj@grinn-global.com> (raw)
In-Reply-To: <20180903112408.2086-1-m.niestroj@grinn-global.com>

Pick commit 225ece3e7dad4cfc44cca38ce7a3a80f255ea8f1 from Linux
upstream.

    crypto: caam - fix endless loop when DECO acquire fails

    In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails
    with -ENODEV, caam_probe() enters an endless loop:

    run_descriptor_deco0
            ret -ENODEV
            -> instantiate_rng
                    -ENODEV, overwritten by -EAGAIN
                    ret -EAGAIN
                    -> caam_probe
                            -EAGAIN results in endless loop

    It turns out the error path in instantiate_rng() is incorrect,
    the checks are done in the wrong order.

    Cc: <stable@vger.kernel.org> # 3.13+
    Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles")
    Reported-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
    Suggested-by: Auer Lukas <lukas.auer@aisec.fraunhofer.de>
    Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
---
 drivers/crypto/caam/ctrl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index 0f9ad328e..681200594 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -202,12 +202,15 @@ static int instantiate_rng(struct device_d *ctrldev, int state_handle_mask,
 		 * without any error (HW optimizations for later
 		 * CAAM eras), then try again.
 		 */
+		if (ret)
+			break;
+
 		rdsta_val = rd_reg32(&ctrl->r4tst[0].rdsta) & RDSTA_IFMASK;
 		if ((status && status != JRSTA_SSRC_JUMP_HALT_CC) ||
-		    !(rdsta_val & (1 << sh_idx)))
+		    !(rdsta_val & (1 << sh_idx))) {
 			ret = -EAGAIN;
-		if (ret)
 			break;
+		}
 		dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx);
 		/* Clear the contents before recreating the descriptor */
 		memset(desc, 0x00, CAAM_CMD_SZ * 7);
-- 
2.18.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-09-03 12:01 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-03 11:23 [PATCH 00/18] crypto: caam: Pull CAAM support improvements from Linux Marcin Niestroj
2018-09-03 11:23 ` [PATCH 01/18] crypto: caam - fix RNG init descriptor ret. code checking Marcin Niestroj
2018-09-03 11:23 ` [PATCH 02/18] crypto: caam - fix warning in APPEND_MATH_IMM_u64 Marcin Niestroj
2018-09-03 11:23 ` [PATCH 03/18] crypto: caam - fix writing to JQCR_MS when using service interface Marcin Niestroj
2018-09-03 11:23 ` [PATCH 04/18] crypto: caam - handle core endianness != caam endianness Marcin Niestroj
2018-09-03 11:23 ` [PATCH 05/18] crypto: caam - add support for iMX6UL Marcin Niestroj
2018-09-03 11:23 ` [PATCH 06/18] crypto: caam - fix sparse warnings Marcin Niestroj
2018-09-03 11:23 ` [PATCH 07/18] crypto: caam - trivial code clean-up Marcin Niestroj
2018-09-03 11:23 ` [PATCH 08/18] crypto: caam - remove unreachable code in report_ccb_status() Marcin Niestroj
2018-09-03 11:23 ` [PATCH 09/18] crypto: caam - constify pointer to descriptor buffer Marcin Niestroj
2018-09-03 11:24 ` [PATCH 10/18] crypto: caam - avoid double inclusion in desc_constr.h Marcin Niestroj
2018-09-03 11:24 ` [PATCH 11/18] crypto: caam - clean-up in caam_init_rng() Marcin Niestroj
2018-09-03 11:24 ` [PATCH 12/18] crypto: caam - fix incorrect define Marcin Niestroj
2018-09-03 11:24 ` [PATCH 13/18] crypto: caam - constify key data Marcin Niestroj
2018-09-03 11:24 ` Marcin Niestroj [this message]
2018-09-03 11:24 ` [PATCH 15/18] crypto: caam - do not use mem and emi_slow clock for imx7x Marcin Niestroj
2018-09-03 11:24 ` [PATCH 16/18] crypto: caam - sync desc.h with Linux Marcin Niestroj
2018-09-03 11:24 ` [PATCH 17/18] crypto: caam - staticize caam_get_era() Marcin Niestroj
2018-09-03 11:24 ` [PATCH 18/18] crypto: caam - allow retrieving 'era' from register Marcin Niestroj
2018-09-03 11:44 ` [PATCH 10/18] crypto: caam - avoid double inclusion in desc_constr.h Marcin Niestroj
2018-09-03 11:44   ` [PATCH 11/18] crypto: caam - clean-up in caam_init_rng() Marcin Niestroj
2018-09-03 11:44   ` [PATCH 12/18] crypto: caam - fix incorrect define Marcin Niestroj
2018-09-03 11:44   ` [PATCH 13/18] crypto: caam - constify key data Marcin Niestroj
2018-09-03 11:44   ` [PATCH 14/18] crypto: caam - fix endless loop when DECO acquire fails Marcin Niestroj
2018-09-03 11:44   ` [PATCH 15/18] crypto: caam - do not use mem and emi_slow clock for imx7x Marcin Niestroj
2018-09-03 11:44   ` [PATCH 16/18] crypto: caam - sync desc.h with Linux Marcin Niestroj
2018-09-03 11:44   ` [PATCH 17/18] crypto: caam - staticize caam_get_era() Marcin Niestroj
2018-09-03 11:44   ` [PATCH 18/18] crypto: caam - allow retrieving 'era' from register Marcin Niestroj
2018-09-03 11:44   ` [PATCH 00/18] crypto: caam: Pull CAAM support improvements from Linux Marcin Niestroj
2018-09-03 11:44   ` [PATCH 01/18] crypto: caam - fix RNG init descriptor ret. code checking Marcin Niestroj
2018-09-03 11:44   ` [PATCH 02/18] crypto: caam - fix warning in APPEND_MATH_IMM_u64 Marcin Niestroj
2018-09-03 11:44   ` [PATCH 03/18] crypto: caam - fix writing to JQCR_MS when using service interface Marcin Niestroj
2018-09-03 11:44   ` [PATCH 04/18] crypto: caam - handle core endianness != caam endianness Marcin Niestroj
2018-09-03 11:44   ` [PATCH 05/18] crypto: caam - add support for iMX6UL Marcin Niestroj
2018-09-03 11:44   ` [PATCH 06/18] crypto: caam - fix sparse warnings Marcin Niestroj
2018-09-03 11:44   ` [PATCH 07/18] crypto: caam - trivial code clean-up Marcin Niestroj
2018-09-03 11:44   ` [PATCH 08/18] crypto: caam - remove unreachable code in report_ccb_status() Marcin Niestroj
2018-09-03 11:44   ` [PATCH 09/18] crypto: caam - constify pointer to descriptor buffer Marcin Niestroj
2018-09-03 11:44   ` [PATCH 10/18] crypto: caam - avoid double inclusion in desc_constr.h Marcin Niestroj
2018-09-03 11:44   ` [PATCH 11/18] crypto: caam - clean-up in caam_init_rng() Marcin Niestroj
2018-09-03 11:44   ` [PATCH 12/18] crypto: caam - fix incorrect define Marcin Niestroj
2018-09-03 11:44   ` [PATCH 13/18] crypto: caam - constify key data Marcin Niestroj
2018-09-03 11:44   ` [PATCH 14/18] crypto: caam - fix endless loop when DECO acquire fails Marcin Niestroj
2018-09-03 11:44   ` [PATCH 15/18] crypto: caam - do not use mem and emi_slow clock for imx7x Marcin Niestroj
2018-09-03 11:44   ` [PATCH 16/18] crypto: caam - sync desc.h with Linux Marcin Niestroj
2018-09-03 11:44   ` [PATCH 17/18] crypto: caam - staticize caam_get_era() Marcin Niestroj
2018-09-03 11:44   ` [PATCH 18/18] crypto: caam - allow retrieving 'era' from register Marcin Niestroj
2018-09-04  8:05 ` [PATCH 00/18] crypto: caam: Pull CAAM support improvements from Linux Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180903112408.2086-15-m.niestroj@grinn-global.com \
    --to=m.niestroj@grinn-global.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox