mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 3/3] ARM: i.MX8MQ: Add node for CPU thermal sensor
Date: Thu, 20 Sep 2018 23:05:32 -0700	[thread overview]
Message-ID: <20180921060532.21485-3-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180921060532.21485-1-andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---

Changes since [v1]:

    - Added #cooling-cells property &A53_0 to avoid getting a warning from DTC

[v1] http://lists.infradead.org/pipermail/barebox/2018-September/034790.html

 arch/arm/dts/imx8mq.dtsi | 85 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi
index 763005217..f89bee200 100644
--- a/arch/arm/dts/imx8mq.dtsi
+++ b/arch/arm/dts/imx8mq.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/imx8mq-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "imx8mq-pinfunc.h"
 
 /* first 128 KiB of memory are owned by ATF */
@@ -96,6 +97,7 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -214,6 +216,89 @@
 				#interrupt-cells = <2>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mq-tmu";
+				reg = <0x30260000 0x10000>;
+				interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				little-endian;
+				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+				fsl,tmu-calibration = <0x00000000 0x00000023
+						       0x00000001 0x00000029
+						       0x00000002 0x0000002f
+						       0x00000003 0x00000035
+						       0x00000004 0x0000003d
+						       0x00000005 0x00000043
+						       0x00000006 0x0000004b
+						       0x00000007 0x00000051
+						       0x00000008 0x00000057
+						       0x00000009 0x0000005f
+						       0x0000000a 0x00000067
+						       0x0000000b 0x0000006f
+
+						       0x00010000 0x0000001b
+						       0x00010001 0x00000023
+						       0x00010002 0x0000002b
+						       0x00010003 0x00000033
+						       0x00010004 0x0000003b
+						       0x00010005 0x00000043
+						       0x00010006 0x0000004b
+						       0x00010007 0x00000055
+						       0x00010008 0x0000005d
+						       0x00010009 0x00000067
+						       0x0001000a 0x00000070
+
+						       0x00020000 0x00000017
+						       0x00020001 0x00000023
+						       0x00020002 0x0000002d
+						       0x00020003 0x00000037
+						       0x00020004 0x00000041
+						       0x00020005 0x0000004b
+						       0x00020006 0x00000057
+						       0x00020007 0x00000063
+						       0x00020008 0x0000006f
+
+						       0x00030000 0x00000015
+						       0x00030001 0x00000021
+						       0x00030002 0x0000002d
+						       0x00030003 0x00000039
+						       0x00030004 0x00000045
+						       0x00030005 0x00000053
+						       0x00030006 0x0000005f
+						       0x00030007 0x00000071>;
+				#thermal-sensor-cells =  <0>;
+			};
+
+			thermal-zones {
+				/* cpu thermal */
+				cpu-thermal {
+					polling-delay-passive = <250>;
+					polling-delay = <2000>;
+					thermal-sensors = <&tmu>;
+
+					trips {
+						cpu_alert0: trip0 {
+							temperature = <85000>;
+							hysteresis = <2000>;
+							type = "passive";
+						};
+
+						cpu_crit0: trip1 {
+							temperature = <95000>;
+							hysteresis = <2000>;
+							type = "critical";
+						};
+					};
+
+					cooling-maps {
+						map0 {
+							trip = <&cpu_alert0>;
+							cooling-device =
+							<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						};
+					};
+				};
+			};
+
 			iomuxc: iomuxc@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-09-21  6:05 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21  6:05 [PATCH v2 1/3] clk: i.MX8MQ: Add missing IMX8MQ_CLK_TMU_ROOT clock Andrey Smirnov
2018-09-21  6:05 ` [PATCH v2 2/3] aiodev: Port Linux driver for i.MX8MQ CPU thermal sensor Andrey Smirnov
2018-09-21  6:05 ` Andrey Smirnov [this message]
2018-09-24  7:05 ` [PATCH v2 1/3] clk: i.MX8MQ: Add missing IMX8MQ_CLK_TMU_ROOT clock Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180921060532.21485-3-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox