mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 14/58] PCI: designware: Add generic dw_pcie_wait_for_link()
Date: Wed, 12 Dec 2018 23:11:00 -0800	[thread overview]
Message-ID: <20181213071144.31691-15-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181213071144.31691-1-andrew.smirnov@gmail.com>

Port of Linux commit 886bc5ceb5cc3ad4b219502d72b277e3c3255a32

  Several DesignWare-based drivers (dra7xx, exynos, imx6, keystone, qcom, and
  spear13xx) had similar loops waiting for the link to come up.

  Add a generic dw_pcie_wait_for_link() for use by all these drivers so the
  waiting is done consistently, e.g., always using usleep_range() rather than
  mdelay() and using similar timeouts and retry counts.

  Note that this changes the Keystone link training/wait for link strategy,
  so we initiate link training, then wait longer for the link to come up
  before re-initiating link training.

  [bhelgaas: changelog, split into its own patch, update pci-keystone.c, pcie-qcom.c]
  Signed-off-by: Joao Pinto <jpinto@synopsys.com>
  Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
  Acked-by: Pratyush Anand <pratyush.anand@gmail.com>

NOTE: For some reason, all of the changes to imx6_pcie_wait_for_link()
made in 4d107d3b5a686b5834e533a00b73bf7b1cf59df7 are actually not
present 886bc5ceb5cc3ad4b219502d72b277e3c3255a32. So there isn't
really a kernel commit corresponding to removal of the large comment
block or check for !(reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/pci-imx6.c        | 30 +-----------------------------
 drivers/pci/pcie-designware.c | 18 ++++++++++++++++++
 drivers/pci/pcie-designware.h |  6 ++++++
 3 files changed, 25 insertions(+), 29 deletions(-)

diff --git a/drivers/pci/pci-imx6.c b/drivers/pci/pci-imx6.c
index 53d767824..18965c7c3 100644
--- a/drivers/pci/pci-imx6.c
+++ b/drivers/pci/pci-imx6.c
@@ -397,35 +397,7 @@ static void imx6_pcie_init_phy(struct pcie_port *pp)
 
 static int imx6_pcie_wait_for_link(struct pcie_port *pp)
 {
-	uint64_t start = get_time_ns();
-
-	/*
-	 * Test if the PHY reports that the link is up and also that the LTSSM
-	 * training finished. There are three possible states of the link when
-	 * this code is called:
-	 * 1) The link is DOWN (unlikely)
-	 *    The link didn't come up yet for some reason. This usually means
-	 *    we have a real problem somewhere, if it happens with a peripheral
-	 *    connected. This state calls for inspection of the DEBUG registers.
-	 * 2) The link is UP, but still in LTSSM training
-	 *    Wait for the training to finish, which should take a very short
-	 *    time. If the training does not finish, we have a problem and we
-	 *    need to inspect the DEBUG registers. If the training does finish,
-	 *    the link is up and operating correctly.
-	 * 3) The link is UP and no longer in LTSSM training
-	 *    The link is up and operating correctly.
-	 */
-	while (1) {
-		u32 reg = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
-		if ((reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP) &&
-		    !(reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
-			return 0;
-
-		if (!is_timeout(start, SECOND))
-			continue;
-
-		return -EINVAL;
-	}
+	return dw_pcie_wait_for_link(pp);
 }
 
 static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp)
diff --git a/drivers/pci/pcie-designware.c b/drivers/pci/pcie-designware.c
index 34dba5898..ab6f1d289 100644
--- a/drivers/pci/pcie-designware.c
+++ b/drivers/pci/pcie-designware.c
@@ -171,6 +171,24 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
 	dw_pcie_readl_rc(pp, PCIE_ATU_CR2, &val);
 }
 
+int dw_pcie_wait_for_link(struct pcie_port *pp)
+{
+	int retries;
+
+	/* Check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (dw_pcie_link_up(pp)) {
+			dev_info(pp->dev, "Link up\n");
+			return 0;
+		}
+		udelay(LINK_WAIT_USLEEP_MAX);
+	}
+
+	dev_err(pp->dev, "Phy link never came up\n");
+
+	return -ETIMEDOUT;
+}
+
 int dw_pcie_link_up(struct pcie_port *pp)
 {
 	if (pp->ops->link_up)
diff --git a/drivers/pci/pcie-designware.h b/drivers/pci/pcie-designware.h
index b8b85c575..051511a26 100644
--- a/drivers/pci/pcie-designware.h
+++ b/drivers/pci/pcie-designware.h
@@ -14,6 +14,10 @@
 #ifndef _PCIE_DESIGNWARE_H
 #define _PCIE_DESIGNWARE_H
 
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES		10
+#define LINK_WAIT_USLEEP_MAX		100000
+
 struct pcie_port {
 	struct device_d		*dev;
 	u8			root_bus_nr;
@@ -66,4 +70,6 @@ int dw_pcie_link_up(struct pcie_port *pp);
 void dw_pcie_setup_rc(struct pcie_port *pp);
 int dw_pcie_host_init(struct pcie_port *pp);
 
+int dw_pcie_wait_for_link(struct pcie_port *pp);
+
 #endif /* _PCIE_DESIGNWARE_H */
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-12-13  7:12 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13  7:10 [PATCH 00/58] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov
2018-12-13  7:10 ` [PATCH 01/58] PCI: desginware: Remove bogus prototypes Andrey Smirnov
2018-12-13  7:10 ` [PATCH 02/58] PCI: designware: Consolidate outbound iATU programming functions Andrey Smirnov
2018-12-13  7:10 ` [PATCH 03/58] PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM Andrey Smirnov
2018-12-13  7:10 ` [PATCH 04/58] PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK Andrey Smirnov
2018-12-13  7:10 ` [PATCH 05/58] PCI: designware: Use exact access size in dw_pcie_cfg_read() Andrey Smirnov
2018-12-13  7:10 ` [PATCH 06/58] PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces Andrey Smirnov
2018-12-13  7:10 ` [PATCH 07/58] PCI: designware: Require config accesses to be naturally aligned Andrey Smirnov
2018-12-13  7:10 ` [PATCH 08/58] PCI: designware: Make "num-lanes" an optional DT property Andrey Smirnov
2018-12-13  7:10 ` [PATCH 09/58] PCI: designware: Ensure ATU is enabled before IO/conf space accesses Andrey Smirnov
2018-12-13  7:10 ` [PATCH 10/58] PCI: designware: Simplify control flow Andrey Smirnov
2018-12-13  7:10 ` [PATCH 11/58] PCI: designware: Make config accessor override checking symmetric Andrey Smirnov
2018-12-13  7:10 ` [PATCH 12/58] PCI: designware: Explain why we don't program ATU for some platforms Andrey Smirnov
2018-12-13  7:10 ` [PATCH 13/58] PCI: imx6: Move link up check into imx6_pcie_wait_for_link() Andrey Smirnov
2018-12-13  7:11 ` Andrey Smirnov [this message]
2018-12-13  7:11 ` [PATCH 15/58] PCI: designware: Add default link up check if sub-driver doesn't override Andrey Smirnov
2018-12-13  7:11 ` [PATCH 16/58] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 17/58] PCI: designware: Remove incorrect RC memory base/limit configuration Andrey Smirnov
2018-12-13  7:11 ` [PATCH 18/58] PCI: designware: Return data directly from dw_pcie_readl_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 19/58] PCI: designware: Move link wait definitions to .c file Andrey Smirnov
2018-12-13  7:11 ` [PATCH 20/58] PCI: designware: Wait for iATU enable Andrey Smirnov
2018-12-13  7:11 ` [PATCH 21/58] PCI: designware: Check LTSSM training bit before deciding link is up Andrey Smirnov
2018-12-13  7:11 ` [PATCH 22/58] PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 Andrey Smirnov
2018-12-14  6:49   ` Andrey Smirnov
2018-12-13  7:11 ` [PATCH 23/58] PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' Andrey Smirnov
2018-12-13  7:11 ` [PATCH 24/58] PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 25/58] PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces Andrey Smirnov
2018-12-13  7:11 ` [PATCH 26/58] PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments Andrey Smirnov
2018-12-13  7:11 ` [PATCH 27/58] PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 28/58] PCI: dwc: designware: Move register defines to designware header file Andrey Smirnov
2018-12-13  7:11 ` [PATCH 29/58] PCI: dwc: all: Rename cfg_read/cfg_write to read/write Andrey Smirnov
2018-12-13  7:11 ` [PATCH 30/58] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 31/58] PCI: imx6: Add local struct device pointers Andrey Smirnov
2018-12-13  7:11 ` [PATCH 32/58] PCI: imx6: Removed unused struct imx6_pcie.mem_base Andrey Smirnov
2018-12-13  7:11 ` [PATCH 33/58] PCI: imx6: Pass struct imx6_pcie to PHY accessors Andrey Smirnov
2018-12-13  7:11 ` [PATCH 34/58] PCI: imx6: Pass device-specific struct to internal functions Andrey Smirnov
2018-12-13  7:11 ` [PATCH 35/58] PCI: imx6: Use generic DesignWare accessors Andrey Smirnov
2018-12-13  7:11 ` [PATCH 36/58] PCI: imx6: Reorder struct imx6_pcie Andrey Smirnov
2018-12-13  7:11 ` [PATCH 37/58] PCI: imx6: Port error messages for imx6_pcie_deassert_core_reset() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 38/58] PCI: imx6: Remove unused return values Andrey Smirnov
2018-12-13  7:11 ` [PATCH 39/58] PCI: imx6: Factor out ref clock enable Andrey Smirnov
2018-12-13  7:11 ` [PATCH 40/58] PCI: imx6: Add DT property for link gen, default to Gen1 Andrey Smirnov
2018-12-13  7:11 ` [PATCH 41/58] PCI: imx6: Remove redundant "Link never came up" message Andrey Smirnov
2018-12-13  7:11 ` [PATCH 42/58] PCI: imx6: Remove LTSSM disable workaround Andrey Smirnov
2018-12-13  7:11 ` [PATCH 43/58] PCI: dwc: all: Split struct pcie_port into host-only and core structures Andrey Smirnov
2018-12-13  7:11 ` [PATCH 44/58] PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 45/58] PCI: dwc: designware: Fix style errors in pcie-designware.c Andrey Smirnov
2018-12-13  7:11 ` [PATCH 46/58] PCI: dwc: Split pcie-designware.c into host and core files Andrey Smirnov
2018-12-13  7:11 ` [PATCH 47/58] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument Andrey Smirnov
2018-12-13  7:11 ` [PATCH 48/58] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes Andrey Smirnov
2018-12-13  7:11 ` [PATCH 49/58] PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically Andrey Smirnov
2018-12-13  7:11 ` [PATCH 50/58] PCI: Fix typos and whitespace errors Andrey Smirnov
2018-12-13  7:11 ` [PATCH 51/58] PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Andrey Smirnov
2018-12-13  7:11 ` [PATCH 52/58] PCI: dwc: Replace lower into upper case characters Andrey Smirnov
2018-12-13  7:11 ` [PATCH 53/58] PCI: dwc: designware: Handle ->host_init() failures Andrey Smirnov
2018-12-13  7:11 ` [PATCH 54/58] PCI: dwc: Add accessors for write permission of DBI read-only registers Andrey Smirnov
2018-12-13  7:11 ` [PATCH 55/58] PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates Andrey Smirnov
2018-12-13  7:11 ` [PATCH 56/58] PCI: dwc: Fix enumeration end when reaching root subordinate Andrey Smirnov
2018-12-13  7:11 ` [PATCH 57/58] PCI: dwc: Small computation improvement Andrey Smirnov
2018-12-13  7:11 ` [PATCH 58/58] PCI: dwc: Constify dw_pcie_host_ops structures Andrey Smirnov
2018-12-14  8:28 ` [PATCH 00/58] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181213071144.31691-15-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox